• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.364-370
• /
• 2013

In the current paper, we propose a new modeling algorithm to analyze the coupling between an incident electromagnetic field (EMF) and a twisted conducting line, which is a kind of non-uniform line. Typically, analysis of external field coupling to a uniform transmission line (TL) is implemented by the Baum-Liu-Tesche (BLT) equation so that the induced load responses can be obtained. However, it is difficult to apply this method to the analysis of a twisted conducting line. To overcome this limitation, we used a chain matrix composed of ABCD parameters. The proposed algorithm expands the dimension of the previous chain matrix to consider the EMF coupling effectiveness of each twisted pair, which is then applied to multi-conductor transmission line (MTL) theory. In addition, we included a comparative study that involves the results of each method applied in the conventional BLT equation and new proposed algorithm in the uniform two-wire TL case to verify the proposed method.

• 한국전자파학회논문지
• /
• 제21권7호
• /
• pp.734-743
• /
• 2010

본 논문은 다중 도체 전송선 해석법과 chain matrix 알고리즘을 이용하여 twisted cable과 같은 비균일 전송선의 EMP 결합을 해석하였다. 전송선의 EMP 결합 해석을 위해 BLT(Baum-Liu-Tesche) 해석법이 널리 사용되고 있으나, twisted cable과 같은 비균일 전송선에 기존의 BLT 해석법을 바로 적용하기는 어렵다. Twisted cable과 같은 비균일 전송선을 해석하기 위해 수많은 작은 길이의 균일 전송선으로 나누어 모델링하였으며, 전체 비균일 전송선의 결합 특성은 각각의 균일 전송선의 EMP 결합 분석을 통해 최종적인 전송선의 결합 특성을 구함으로 써 가능해진다. 이러한 비균일 전송선 EMP 결합 해석 기법을 검증하기 위해 균일 전송선에 대하여 기존의 BLT 해석 결과와 비교하였으며, 제시된 비균일 전송선 EMP 결합 해석 기법을 지표면 위에 놓여 있는 twisted cable에 적용하여 대기 중의 핵폭발에 의한 HEMP(High altitude Electromagnetic Pulse)와 같은 매우 강한 펄스가 입사되었을 때, 전송선에 연결된 부하에 유기되는 전류(또는 전압) 응답을 분석하였다.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1568-1575
• /
• 2005

The calculation of the transmission loss of the silencers with complicated internal structures by the conventional BEM combined with the transfer matrix method is incorrect at best or impossible for 3-dimensional silencers due to its inherent plane wave assumption. On this consideration, we propose an efficient practical means to formulate algebraic overall condensed acoustic equations for the whole acoustic structure, where particle velocities on the domain interface boundaries are unknowns, and the solutions are used later to compute the overall transfer matrix elements, based on the multi-domain BEM data. The transmission loss estimation by the proposed method is tested by comparison with the experimental one on an air suction silencer with perforated internal structures installed in air compressors. The method shows its viability by presenting the reasonably consistent anticipation of the experimental result.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.225-231
• /
• 2009

In this paper, it is shown that Carson's equation can still be applied for the calculation of the series reactance of transmission lines with no ground return current as well as the one with ground return. It is proved in the following method. First two voltage drop equations for three-phase three wire transmission line are derived, one without considering ground return and the other using Carson's equation. The impedance matrix of the two equations are different from each other. But if we put the condition of zero ground current, $I_a+I_b+I_c=0$, those two equations becomes the identical equations. Therefore even a transmission line is not grounded, its line parameters can still be obtained using the Carson's equation. It has been confused whether or not Carson's equation can be used for an ungrounded system. It is because where ever Carson's equation is shown in the book, it also says that the system has ground return current paths as a premise. It is also verified with EMTP studies on the test circuit.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.169-178
• /
• 2008

In this paper, it is shown that Carson's equation can still be applied for the calculation of the series reactance of transmission lines with no ground return current as well as the one with ground return. It is proved in the following method. First two voltage drop equations for three-phase three wire transmission line are derived, one without considering ground return and the other using Carson's equation. The impedance matrix of the two equations are different from each other. But if we put the condition of zero ground current, $I_a+I_b+I_c=0$, those two equations becomes the identical equations. Therefore even a transmission line is not grounded, its line parameters can still be obtained using the Carson's equation. It has been confused whether or not Carson's equation can be used for an ungrounded system. It is because where ever Carson's equation is shown in the book, it also says that the system has ground return current paths as a premise. It is also verified with EMTP studies on the test circuit.

• International journal of advanced smart convergence
• /
• 제6권4호
• /
• pp.33-40
• /
• 2017

In this paper, complex quadruplet zeros of microwave filter systems are investigated. For the cascaded systems the chain matrices are most conveniently used to derive the voltage transfer function of Laplace transform with cascaded two-port subsystems. The convenient relations of transfer function and chain matrix are used in order to find the transmission zeros. Starting from a ladder network, we introduced a crossed-coupled lumped element, in order to show the improved response of bandpass filter. By solving the transmission zero characteristic equation derived from the cascaded subsystems, we found the zeros of filter system with externally cross-coupled lumped elements. With the cross-coupled elements of capacitors, the numerator polynomial of system transfer function is used to locate the quadruplet zeros in complex plane. When the two pairs of double are on the zeros -axis, with the perturbed values of element, we learned that the transition band of lowpass filter is improved. By solving the characteristic equation of cascaded transfer function, we can obtain the zeros of the cross-coupled filter system, as a result of perturbed values on lumped element.

• 대한전기학회논문지
• /
• 제33권10호
• /
• pp.410-422
• /
• 1984

This paper presents a new practical method for optimal active and reactive power control for the economic operation in electrical power system, and the programs are developed for digital computer solution. The major features and techniques of this paper are as follows: 1) The method is presented for finding the equivalent active power balance equation applying the sparse Jacobian matrix of power flow equation instead of using B constant as active power balance equation considering transmission loss, and thus for determining directly optimal active power allocation berween generator unitw satisfying the equality and inequality constraints. 2) The method is proposed for solving directly the optimum economim dispatch problem without using gradient method and penalty function for both active and reactive power control. As a result, the computing time are reduced and convergence characteristic is remarkably improved. 3) Unlike most of conventional methods which adopt the transmission loss as a objective function for reactive power control, the total fuel cost of themal power plant is adopted as objective function for both active and reactive power control. consequently, more reasonable and economic profit can be achieved.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.1918-1925
• /
• 1989

A method for computing the capacitance and inductance matrix for 2-D multiconductor transmission lines with arbitrary cross section in dielectric medium is presented. The integral equation is obtained by using a free space Green function in conjunction with free and bound charges existing on boundary surfaces. The numerical analysis is based on the moment method using point matching and Galerkin method. And kthe scheme to reduce memory and computation time is presented for symmetric structure.

• 한국전자파학회논문지
• /
• 제14권12호
• /
• pp.1283-1291
• /
• 2003

원하는 주파수 응답을 갖는 불균일 전송선로(NTL)는 일차원 역산란 문제에서 결합모드 Zakharov-Shabat(ZS) 방정식으로부터 포텐셜을 합성함으로서 구현할 수 있다. 본 연구에서는 ZS 방정식을 사용하여 제한된 포텐셜범위를 갖도록 하는 임의 반사계수를 갖는 NTL을 효율적으로 합성하는 방법을 제안한다. 이 방법은 특정한 윈도우 함수를 사용한 반사계수를 목표치로 한 경우보다 합성된 선로의 길이가 짧아지는 장점을 가진다. 또한 ZS 역변환시 연쇄법을 사용함으로서 기존의 반복법에 의한 계산과정을 간소화시켰다. 분산특성을 갖는 NTL 필터 설계에 제안한 방법을 적용함으로서 특정한 윈도우를 목표치로 한 기존의 방법과 비교, 분석하였으며, chain 행렬을 사용한 2-포트 해석을 통해 타당성을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.518-522
• /
• 2014

This paper is concerned with the dynamic modeling of transmission line undergoing galloping vibrations. To this end, the kinetic and potential energies of a uniform wire vibrating in space are derived. The equations of motion suitable for numerical simulations are derived using the assumed mode method and Lagrange equation. The resulting equations of motion are expressed in matrix form. To cope with bundled transmission line, the spacer was modelled by a spring element. As a numerical example, a two-wire transmission line combined by spacers was considered. Natural vibration characteristics show that the in-plane vibrations of the transmission line appeared in low frequency range, which may lead to galloping.