• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.265-268
• /
• 2003

In RF application of resonator, cylinerical and transmission line(TRL) type are used generally, especially in ceramic modules the latter is used widely, TRL type resonators are used in VCO and RF filters etc.. TRL type resonators are divided stripline and microstripline and their characteristics depend on that of conductor and dielectric materials. In this study, the effect of material properties on the stripline resonator is measured and analyzed. Besides, the optimum design rule of resonator is presented.

• 한국전자파학회논문지
• /
• 제27권5호
• /
• pp.424-429
• /
• 2016

본 논문은 인공전송선로 중 하나인 LUC(Low-pass filter Unit Cell)을 이용한 이중모드 링-공진기 대역통과 여파기를 제안한다. 기존의 링 공진기 대역통과 여파기는 한 파장 링 공진기를 기반으로 설계하므로 소형화에 어려움이 있고, 정수배 파장의 고조파로 인한 원치 않는 동작의 문제점이 있다. 저역통과 특성을 지닌 인공전송선로 중 하나인 LUC를 이용하여 링-공진기를 구성함으로써 소형화와 고조파 저지 특성을 구현하였다. 링-공진기와 입력 및 출력 단의 인터디지탈 결합선로 인버터를 이용하여 2단 대역통과 여파기를 설계 및 제작하였다. 제작된 여파기는 이중모드, UWB 전 대역저지, 날카로운 스커트 특성을 나타냈으며, 기존의 링-공진기 대역통과 여파기의 링 면적을 약 60 % 감소시켰다.

• 대한전자공학회논문지TC
• /
• 제44권11호
• /
• pp.54-59
• /
• 2007

본 논문에서는 varactor-loaded split-ring resonator (VLSRR)를 기반으로 한 가변 metamaterial 전송 선로를 이용한 광대역 전압 제어 발진기를 제안하였다. 우선, 마이크로스트립 라인에 결합된 VLSRR이 주파수 조절 특성을 갖는 metamaterial 전송선로를 만들 수 있음을 증명하였다. 음의 유효 투자율은 VLSRR에 의해 공진 주파수 상에서 협대역으로 얻어지는데, 버랙터 다이오드들의 연결을 통해 주파수가 조절될 수 있다. 1.8 V의 공급 전압을 갖는 전압 제어 발진기는 주파수 조절 범위 $5.407\;{\sim}\;5.84\;GHz$에서 $-108.84\;{\sim}\;-105.5\;dBc/Hz$ @ 100 kHz의 위상 잡음 특성을 얻는다. Power-frequency-tuning-normalized (PFTN)이라고 불리우는 figure of merit (FOM)은 20.144 dB이다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.136-140
• /
• 2002

In this paper, newly constructed 5.6 ㎓ ring resonator by using a T-Junction and a parallel transmission line. The resonator's size reduced twice more than a current ring and a hair-pin resonator at this paper's center frequency The loaded Q value is 240∼250 at center frequency. also, It was explained by RLC equivalent equation for the resonator.

• 한국인터넷방송통신학회논문지
• /
• 제13권4호
• /
• pp.201-208
• /
• 2013

본 논문은 한쪽 면이 열린 동축 공동 공진기의 경험적 설계 방법에 대한 연구이다. 공진기의 내부 도체 반경과 공진기의 내경 그리고 길이를 이용하여 설계한다. 그러나 기본 동축 선로 이론을 적용하면 내부 도체 반경과 공진기의 내경 값에 관계없이, 길이 변화에 의해서만 공진 주파수와 Q값의 특성이 달라지는 것을 알 수 있다. 따라서 내부 도체 반경과 공진기 내경 그리고 길이의 영향을 알아내고, 경험적 설계를 통해 이론값과 설계값의 오차를 줄여 최적화된 공진기 설계 방법을 제안한다. 모의실험 결과를 바탕으로 공진기의 내경은 14 mm, 내부 도체 반경은 각각 2 mm, 5 mm, 10 mm 그리고, 공진기의 길이는 8.5 mm로 제작하였다. 제작된 공진기의 공진 주파수는 6.1, 5.7, 6.5 GHz로 측정되었다. 모의실험과 제작된 공진기를 측정한 결과에 의하면, 공진기의 길이가 10 mm이하일 때는 기본 동축 전송 이론을 직접 적용하고, 10 mm이상 일 때는 계산된 공진 주파수에 0.5 GHz보정인자 값을 더함으로써 비교적 오차가 작은 한쪽 면이 열린 동축 공동 공진기를 설계 할 수 있음을 알 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제9권3호
• /
• pp.164-173
• /
• 2009

In this paper, two new circuit structures for European and U.S. ultra-wide band(UWB) bandpass filters(BPFs) with sharp roll-off characteristics are introduced. We show first that the ultra-wide bandpass property is obtained from a $\lambda$/4 open T resonator with a capacitively coupled $\lambda$/4 short-circuited line, which provides two attenuation poles at lower and upper cutoff frequencies. Then, two identical capacitively coupled input/output lines, which can be $\lambda$/4-length open ends or $\lambda$/2-length short ends, with the T-resonator, are adopted to suppress lower and higher frequency components outside of the pass band. There is coupling between the input and output lines providing two additional transmission zeros in the lower and upper transition bands of the filter. Since the coupling between the T-resonator with the $\lambda$/4 short-circuited line and the input/output lines limits the bandwidth of the filter to the European UWB band, both the $\lambda$/4 short-circuited line and the input/output lines are inserted between the two stacked T-resonators for the U.S. UWB band. The filter structures are simulated with ADS and HFSS and realized with low-temperature co-fired ceramic(LTCC) green tape which has the dielectric constant of 7.8. Measurement results agree well with HFSS simulation results.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.167-175
• /
• 2013

The wave propagation characteristics of an acoustic metamaterial composed of periodically repeated one-dimensional Helmholtz resonator array was investigated considering the effects of dimensional changes of the resonator geometry on the transmission coefficient and band gap. The effective impedance and transmission coefficient of the acoustic metamaterials are obtained based on the acoustic transmission line method. The designed acoustic metamaterials exhibit band gaps and negative bulk modulus that are non-existent properties in the nature. The band gap of the acoustic metamaterial is strongly dependent on the geometry parameters of Helmholtz resonators and lattice spacing. Also, a new type of metamaterial that is periodically constructed with two different resonators was designed to open the local resonance band gap without change of Bragg scattering.

• 전기학회논문지
• /
• 제59권8호
• /
• pp.1429-1435
• /
• 2010

In this paper, a double lorentz composite right left handed(DL-CRLH) transmission line is designed using defected ground structure (DGS) and varactor diodes. Previously, the diode has been adopted only selectively for one of parallel or series resonators, and the balanced frequency as well as triple band frequencies were fixed. However in the proposed DL-CRLH transmission line, the balanced frequency, where the resonant frequencies of the series-connected parallel resonator and shunt-connected series resonator are the same, is adjustable. In addition, the triple band frequencies are controlled, too. The measured balanced frequency varies between 3.42~4.8GHz according to the controlled bias voltage. Under the same bias condition for the balanced frequency, the adjusted frequencies are 2.22~2.77GHz, 3.7~5.2GHz, 7.32~8.23GHz, 3.42~4.8GHz, and 4.44~5.92GHz for the conditions that ${\beta}d=+0.5{\pi}$, $-0.5{\pi}$, 2nd $+0.5{\pi}$, ${\omega}_{\infty}$, and ${\omega}_o$, respectively.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.91-96
• /
• 2011

In this paper, we propose a microstrip bandpass filter using stepped-impedance coupled-line hairpin resonators. The stepped-impedance coupled-line hairpin resonator has extended harmonic suppression in comparison with a conventional hairpin resonator due to transmission zero and the movement of harmonic frequencies resulting from the stepped-impedance characteristic. A high-pass type impedance/admittance inverter is employed in order to improve the lower frequency skirt characteristics of the passband. A 4-pole bandpass filter is designed and fabricated at 1.8 GHz. The measured results show the excellent attenuation performance at the stopband which is greater than 30 dB up to 10 GHz.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.151-156
• /
• 2001

Using the photoimageable thick film conductors, $25\mu\textrm{m}$ line widths and $25\mu\textrm{m}$ spaces can be obtained. Test patterns are made by green tape lamination, paste printing, exposing to UV light, developing in an aqueous process and cofiring. Postfiring method using alumina substrate can be also applied to fine line formation. Series gap resonator formed by photopatterning process showed the improved signal transmission characteristics compared to that obtained by conventional screen printing.