• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.60-64
• /
• 2007

In this paper, we designed FFT for European DTV and implemented system with Stratix EP1S25F672C6 FPGA At the implemented FFT, we used SIC architecture. SIC architecture is composed of algorithm-specific processing element, RAM memory, registers, and a central or distributed control unit. Designed FFT was acceptable either 2K or 8K point FFT processing, and is selectable guard interval such as 1/4, 1/8, 1/16, 1/32. Consequently, it was suitable for the standard of DVB-T(Digital Terrestrial Video Transmission System) specification. It resulted in 12% of total logic gate and 53% of total memory bit in Stratix device.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1305-1316
• /
• 2013

A long-term wind resource map was made to provide the key design data for the 2.5 GW Korean West-South Offshore Wind Project, and its reliability was validated. A one-way dynamic downscaling of the MERRA reanalysis meteorological data of the Yeongwang-Gochang offshore was carried out using WindSim, a Computational Fluid Dynamics based wind resource mapping software, to establish a 33-year time series wind resource map of 100 m x 100 m spatial resolution and 1-hour interval temporal resolution from 1979 to 2012. The simulated wind resource map was validated by comparison with wind measurement data from the HeMOSU offshore meteorological tower, the Wangdeungdo Island meteorological tower, and the Gochang transmission tower on the nearby coastline, and the uncertainty due to long-term variability was analyzed. The long-term variability of the wind power was investigated in inter-annual, monthly, and daily units while the short-term variability was examined as the pattern of the coefficient of variation in hourly units. The results showed that the inter-annual variability had a maximum wind index variance of 22.3% while the short-term variability, i.e., the annual standard deviation of the hourly average wind power, was $0.041{\pm}0.001$, indicating steady variability.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.834-840
• /
• 2001

Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers big power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shaped curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, It is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. This paper describes a mathematical model of profile shifted involute gear. and this model is based on Camus's theory. We draw three dimensions gear have accurate mathematical function using ADS, VisualLISP. and To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• Journal of Korea Spatial Information System Society
• /
• v.4 no.1 s.7
• /
• pp.27-37
• /
• 2002

Ideas providing an optimal car route using current traffic condition, maintaining the current location and the history of driven route of a car in the main central office, in where GPS signals transmitted from the driving cars are received, have been proposed. Since GPS signals occurred in certain time interval instead of all GPS signals are transmitted from the car due to the cost of transmission, an algorithm that is able to recover the missing GPS signals is required. In this paper, an efficient algorithm, which finds the driven route and the current location of a car fast, is proposed. To verify the efficiency of the proposed algorithm, it is applied to the various real GIS map and it turns out to be very effective.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.5
• /
• pp.316-322
• /
• 2005

In order to develop a floating breakwater, which can efficiently control long period waves, vertical plates are attached in pontoon. Wave control and dynamic behaviors of the newly developed vertical plates type are verified from numerical analysis and hydraulic experiment. As a result, for the wave control and energy dissipation, the newly developed vertical plates type is more efficient than the conventional pontoon type. For the floating body motion, the wave transmission, depending on incident wave period, is decreased at the natural frequency. Dimensionless drift distance has similar trend of the reflection rate of wave transformation near natural frequency except maximum and minimum values. Dimensionless maximum tension is 17 percent of the weight of floating breakwater in case of the conventional pontoon type and 18 percent or 14 percent in case of the newly developed vertical plates type. Thus, it is shown that the wave control is improved by the vertical plates type. In addition, by adjusting the interval of the front and back vertical plate, we would control proper wave control.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.125-126
• /
• 1998

Pulse conduction velocity is determined by areterial compliance, which is changed by lateral pressure of arterial wall. Hydrostatic pressure of the limb vessel is changed by body position, especially in elevated arm. The arterial pulse in the finger causes the blood volume to change, changing the optical density of the blood. Photoplethysmograph of index finger was obtained by LED and phototransistor. Pulse transmission time(PTT) was measured by the interval between the peak of ECG R wave and the peak of the finger plethysmogram. PTT was increased by upward position of arm, and decreased by downward position of the arm compared to horizontal position. This result suggests that relationship between finger plethysmography and postural change could be applied to evaluate clinical cardiovascular status.

• Journal of Preventive Medicine and Public Health
• /
• v.53 no.3
• /
• pp.164-167
• /
• 2020

Objectives: As of March 3, 2020, the Shincheonji religious group accounted for the majority of Korean cases of coronavirus disease 2019 (COVID-19). Nonetheless, the most likely cause of the broad spread of COVID-19 among members of the Shincheonji religious group remains largely unknown. Methods: We obtained data of laboratory-confirmed cases related to the Shincheonji religious group from press releases by Korean public health authorities and news reports. We measured the period from the date of illness onset to the date of COVID-19 confirmation. Results: We analysed data from 59 cases (median age, 30 years). The estimated median period between the date of symptom onset and the date of COVID-19 confirmation was 4 days (95% confidence interval, 1-12). Conclusions: There was a delay in COVID-19 confirmation from the date of illness onset among the cases linked to the Shincheonji religious group. This delay likely contributed to the occurrence of many cases of COVID-19 in the group.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.625-630
• /
• 2006

Zigbee 센서 네트워크에서는 multihop 전송을 위하여 tree topology와 beacon-enabled 네트워크 구성을 갖는다. 이러한 multihop beaconing 네트워크의 목적은 routing 노드들에게 Sleep할 기회를 주어 파워의 소모를 줄이고자 하는 데 있다. 파워의 소모를 줄이고 beacon 전송시의 충돌을 방지하기 위하여 beacon 전송 스케줄링이 필요한데 본 논문은 multihop을 지원하고 에너지 효율에 효과적인 beacon 전송 스케줄링 알고리즘과 이를 바탕으로 에너지 효율적인 라우팅 기법을 제안한다. 본 제안은 Zigbee coordinator의 beacon interval(BI)이 결정되면 네트워크 내의 beacon을 전송하는 모든 노드들은 Zigbee coordinator의 BI를 알고 모든 노드의 superframe duration(SD)은 동일하다고 가정한다. 이러한 가정하에서 beacon을 전송하는 노드들이 Zigbee coordinator의 BI 구간 중 항상 정해진 시간에 자신의 beacon을 전송한다면 beacon의 충돌을 막을 수 있음을 보여 준다. 또한 노드들이 서로의 beacon 전송 시간을 알 수 있기 때문에 목적지 노드의 beacon을 tracking하지 않고도 목적지 노드가 active 되는 시점에 패킷을 전송하면 에너지 측면에서 좀 더 효율적인 라우팅 기반을 제공한다는 것을 보여 준다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.16-24
• /
• 2010

High Speed Uplink Packet Access(HSUPA) is a WCDMA Release 6 technology which corresponds to High Speed Downlink Packet Access(HSDPA). Node B Supports fast scheduling, Hybrid ARQ(HARQ), short Transmission Time Interval(TTI) for high rate uplink packet data. It is very important to detect Iub congestion to improve end user's Quality of Service(QoS). This paper proposes Node B Congestion Detection(BCD) mechanism and suggests to use the hybrid of Transport Network Layer(TNL) congestion detection and BCD. It is shown that HSUPA user throughput performance can be improved by the proposed method even with small Iub bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1306-1312
• /
• 2000

The quality loss of a X-band transmitter has been derived by means of MC simulation. The transmitter as a payload of LEO(Low Earth Orbit) satellite is capable of the down transmission the image data of hundreds Mbps generated from the Electro-Optical Instrument in real time. The parameters such as data asymmetry amplitude unbalance,phase unbalance, wave shaping and channel interference are included in the quality loss simulation Assuming that normally distributed gaussian noise is simply added to the channel, the quality loss of 0.7 dB has been obtained through this simulation based on a 95% confidence interval. The obtained quality loss can be applied to the link budgets as an additional loss item.