• Journal of Sensor Science and Technology
• /
• v.20 no.3
• /
• pp.162-167
• /
• 2011

In this paper, we propose a vision system using a field programmable gate array(FPGA) and a smart vision chip. The output of the vision chip is varied by illumination conditions. This chip is suitable as a surveillance system in a dynamic environment. However, because the output swing of a smart vision chip is too small to definitely confirm the warning signal with the FPGA, a modification was needed for a reliable signal. The proposed system is based on a transmission control protocol/internet protocol(TCP/IP) that enables monitoring from a remote place. The warning signal indicates that some objects are too near.

• The Journal of Korean Physical Therapy
• /
• v.13 no.1
• /
• pp.205-218
• /
• 2001

Interpretation of pain by the patients and the observers as well as the methods of treatment remain as varied as are the concepts of pain. The physiologic mechanism of pain is undergoing a serious revision. It is nociceptive receptive mechanism and Melzak concept of gate theory of pain transmission and etc. Therefore pain depend on the evaluator's learning, experience, or specialty.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.522-531
• /
• 2016

This paper proposes a new NLC (Nearest Level Control) scheme for MMCs (Modular Multilevel Converters), which offers voltage ripple reductions in the DC capacitor of the SM (Sub-Module), the output voltage harmonics, and the switching losses. The feasibility of the proposed NLC was verified through computer simulations. Based on these simulation results, a hardware prototype of a 10kVA, DC-1000V MMC was manufactured in the lab. Experiments were conducted to verify the feasibility of the proposed NLC in an actual hardware environment. The experimental results were consistent with the results obtained from the computer simulations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.268-270
• /
• 2002

For analysis of semiconductor's electrons transmission characteristics, Impact ionization(I.I.) is very important. I.I. are generation process of electron-hole pairs. Therefore, the characteristics of device can change along with applied voltage or temperature. In this paper, we are scaled down the gate length to 50nm. Also, using TCAD simulator, we are analyzed I.I. and breakdown about three models-Van Overstraeten , Okuto and Ours models.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.557-559
• /
• 2009

We attempted modulation of hydrogen dilution ratio to achieve both the minimal incubation layer and high deposition rate. The incubation layer thickness was estimated by transmission electron microscopy (TEM) and crystallization fraction was measured by Raman spectroscopy.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.818-821
• /
• 2011

A D-band subharmonically-pumped resistive mixer has been designed, processed, and experimentally tested. The circuit is based on a $180^{\circ}$ power divider structure consisting of a Lange coupler followed by a ${\lambda}$/4 transmission line (at local oscillator (LO) frequency). This monolithic microwave integrated circuit (MMIC) has been realized in coplanar waveguide technology by using an InAlAs/InGaAs-based metamorphic high electron mobility transistor process with 100-nm gate length. The MMIC achieves a measured conversion loss between 12.5 dB and 16 dB in the radio frequency bandwidth from 120 GHz to 150 GHz with 4-dBm LO drive and an intermediate frequency of 100 MHz. The input 1-dB compression point and IIP3 were simulated to be 2 dBm and 13 dBm, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.220-225
• /
• 2018

A class E power oscillator is demonstrated for 6.78-MHz wireless power transfer system. The oscillator is designed with a class E power amplifier to use an LC feedback network with a high-Q inductor between the input and the output. Multiple capacitors are used to minimize the variation of the oscillation frequency by capacitance tolerance. The gate and drain bias voltages with opposite characteristics to make the frequency shift of the oscillator are connected in a resistance distribution circuit located at the output of the low drop-out regulator and supplied bias voltages for class E operation. The measured output of the class E power oscillator, realized using the co-simulation, shows 9.2 W transmitted power, 6.98 MHz frequency and 86.5% transmission efficiency at the condition with 20 V $V_{DS}$ and 2.4 V $V_{GS}$.

• Journal of Navigation and Port Research
• /
• v.31 no.9
• /
• pp.779-784
• /
• 2007

This paper describes a new progressive embedded Internet Protocol(IP) camera available for real-time image transmission. It was applied for ship safety and security on seashore area. The functions of developed embedded system was more effective and excellent than conventional systems. Nowadays, each nation has established harbor security systems to jump up their ports to international port. Recently Incheon port has tried to change man security into center security system used by image security system. The security system of Incheon port has some advantages like effectivity of security system and reduction of manpower and cost, installed by image security system with CCTV cameras at the entrance gate and around the fence. Thus in this paper, we have designed and implemented a Personal Digital Assistants(PDA) based Image Surveillance System for Harbor Security using IP Camera under ubiquitous environment. This system has big advantages which are more effective in an emergency and low cost and small manpower than conventional systems.

• Journal of Power Electronics
• /
• v.11 no.3
• /
• pp.375-380
• /
• 2011

A STATic synchronous COMpensator (STATCOM) is a shunt connected voltage source converter (VSC) based FACTS controller using Gate Turn Off (GTO) power semiconductor devices employed for reactive power control. The operation principal is similar to that of a synchronous condenser. A typical application of a STATCOM is voltage regulation at the midpoint of a long transmission line for the enhancement of power transfer capability and/or reactive power control at the load centre. This paper presents the modeling of STATCOM with twenty four pulse three level VSC and Type-1 controller to regulate the reactive current or the bus voltage. The performance is evaluated by transient simulation. It is observed that, the STATCOM shows excellent transient response to step change in the reactive current reference. While the eigenvalue analysis is based on D-Q model, the transient simulation is based on both D-Q and 3 phase models of STATCOM (which considers switching action of VSC).

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1171-1181
• /
• 2019

Modular Multilevel Converter (MMC)-based HVDC power transmission using a real-time simulator is one of the key technologies in power electronics research. This paper introduces the design methodology of a physical MMC-HVDC control system based on a Field-Programmable Gate Array (FPGA), which has the advantage of high-speed parallel operation, and validates the accuracy of MMC-HVDC control when operated with a Real-Time Digital Simulator (RTDS). Finally, this paper compares and analyzes the characteristics of capacitor voltage balancing methods such as Nearest Level Control (NLC), NLC with a reduced switching frequency, and tolerance band modulation implemented on physical control system.