• 전기학회논문지P
• /
• 제64권4호
• /
• pp.291-296
• /
• 2015

Transmission line is exposed to a large area, and then faults are likely to occur than the other component of power system. When a fault occurs on a transmission line, fault locator helps fast recovery of power supply on power system. This paper deals with the design of a digital fault locator for improvement accuracy of the fault distance estimation and a fault occurrence position for transmission line. The algorithm of a fault locator uses a DC offset removal filter and DFT filter. The algorithm utilizes a fault data of GPS time synchronized. The computed fault information is transmitted to the other side substation through communication. The digital fault locator includes MPU module, ADPU module, SIU module, and a power module. The MMI firmware and software of the fault locator was implemented.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.460-467
• /
• 2008

This paper presents a new numerical algorithm for the fault location estimation and arcing fault detection when a single-phase arcing ground fault occurs on a transmission line. The proposed algorithm derived in the spectrum domain is based on the synchronized voltage and current samples measured from the PMUs(Phasor Measurement Units) installed at both ends of the transmission lines. In this paper, the algorithm uses DFT(Discrete Fourier Transform) for estimation. The algorithm uses a short data window for real-time transmission line protection. Also, from the calculated arc voltage amplitude, a decision can be made whether the fault is permanent or transient. The proposed algorithm is tested through computer simulation to show its effectiveness.

• 대한산업공학회지
• /
• 제14권1호
• /
• pp.1-15
• /
• 1988

DS1 transmission systems use framing bit errors, bipolar violations and code-detected errors to estimate the bit error rate when determining errored and severely errored seconds. Using the coefficient of variation under the memoryless binary symmetric channel assumption, a basic framework to evaluate these estimation schemes is proposed to provide a practical guideline in determining errored and severely errored seconds which are fundamental in monitoring the real-ime error performance of DS1 transmission systems carrying live traffic. To evaluate the performance of the cyclic redundancy check code (CRC), a computer simulation model is used. Several drawbacks of the superframe format in association with real time error performance monitoring are discussed. A few recommendations are suggested in measuring errored and severely errored seconds, and determining service limit alarms through the use of the superframe format. Furthermore, we propose a new robust scheme for determining service limit alarms which take into consideration the limitations of some estimation schemes for the time interval of one second.

• Journal of information and communication convergence engineering
• /
• 제16권1호
• /
• pp.38-42
• /
• 2018

In this paper, we consider measurement allocation problem in a spatially correlated sensor field. Our goal is to determine the probability of each sensor's being measured based on its contribution to the estimation reliability; it is desirable that a sensor improving the estimation reliability is measured more frequently. We consider a spatial correlation model of a sensor field reflecting transmission power limit, noise in measurement and transmission channel, and channel attenuation. Then the estimation reliability is defined distortion error between event source and its estimation at sink. Motivated by the correlation nature, we model the measurement allocation problem into a cooperative game, and then quantify each sensor's contribution using Shapley value. Against the intractability in the computation of exact Shapley value, we deploy a randomized method that enables to compute the approximate Shapley value within a reasonable time. Besides, we envisage a measurement scheduling achieving the balance between network lifetime and estimation reliability.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.207-216
• /
• 1997

We developed the durability estimation and design systems to minimize the volume, considering the durability, efficiency, and design requirements of worm gears. That is, we consider each kind of factors affecting on durability on the basis of AGMA Standard for the cylindrical and double-enveloping worm gears. We also estimate input power on the basis of wear and durability, bending strength and deflection of worm shaft, and we developed the durability estimation and design systems of power transmission worm gears introducing the optimal design method on the personal computer to be easily used in field. Also, we developed a method which converts the design variables obtained from the optimal design method to integer values(number of worm threads, number of worm threads, number of worm wheel teeth, etc.,) to be used in real design and production. The developed durability estimation and design method can be easily applied to the design of worm gears used as power transmission devices in machineries and is expected to be used for weight minimization of worm gear unit.

• 방송공학회논문지
• /
• 제20권2호
• /
• pp.248-256
• /
• 2015

본 논문에서는 지상파 클라우드 방송 시스템 (cloud transmission system)의 간섭 및 잡음 신호를 모델링하고 수신기의 비트 오율 (bit error rate) 성능을 제시한다. 지상파 클라우드 방송 시스템은 하나 이상의 동일채널간섭이 존재하는 환경에서 동작해야 하므로 negative SINR (signal-to-interference plus noise ratio) 영역에서 동작해야 한다. 지상파 클라우드 방송 시스템의 요구되는 SINR 영역에서 간섭 및 잡음을 가우시안으로 모델링할 수 있으며 모델링된 간섭 및 잡음 모델을 이용하여 비트 오율 성능을 관찰한다. 또한, 최소자승 (least square) 기반의 선형 보간된 채널 추정 값을 평균함으로써 클라우드 방송 시스템에서 향상된 채널 추정 방식을 제안한다. 전산 실험 결과는 제안한 방식을 이용하여 클라우드 방송 시스템이 negative SINR 영역에서 동작함을 보여준다.

• Journal of Radiation Protection and Research
• /
• 제28권1호
• /
• pp.59-63
• /
• 2003

Purpose : Measurement of transmission dose is useful for in vivo dosimetry of QA purpose. The objective of this study is to develope an algorithm for estimation of tumor dose using measured transmission dose for open radiation field. Materials and Methods : Transmission dose was measured with various field size (FS), phantom thickness (Tp), and phantom chamber distance (PCD) with a acrylic phantom for 6 MV and 10 MV X-ray Source to chamber distance (SCD) was set to 150 cm. Measurement was conducted with a 0.6 cc Farmer type ion chamber. Using measured data and regression analysis, an algorithm was developed for estimation of expected reading of transmission dose. Accuracy of the algorithm was tested with flat solid phantom with various settings. Results : The algorithm consisted of quadratic function of log(A/P) (where A/P is area-perimeter ratio) and tertiary function of PCD. The algorithm could estimate dose with very high accuracy for open square field, with errors within ${\pm}0.5%$. For elongated radiation field, the errors were limited to ${\pm}1.0%$. Conclusion : The developed algorithm can accurately estimate the transmission dose in open radiation fields with various treatment settings.

• 한국차세대컴퓨팅학회논문지
• /
• 제13권4호
• /
• pp.112-123
• /
• 2017

전자전 상황에서 수신기의 수집 변수를 토대로 RF 위협체를 역추적함으로서 효율적인 전자공격을 수행하려는 연구가 진행되고 있다. 본 논문에서는 다양하고 구체적인 전자전 상황에서 위협체 역추적 알고리즘의 성능을 검증할 수 있도록 하기 위하여, 전자파 수집 변수를 바탕으로 레이더 위협체, 전자전 수신기, 전자파 전송환경과 같은 전자전 구성 단위들의 기능을 모델링하여 전자전 송수신 시뮬레이터를 구축한다. 시뮬레이터의 실험 결과는 수 m 정도의 거리 추적 오차와 소수점 이하 크기의 각도 추적 오차를 보이며, 모노펄스 빔폭과 편각의 변화에 따른 각도 추적 오차의 변화가 이론적인 모델링의 결과와 동일한 양상을 보임으로써 레이더 위협체의 거리 및 각도 추적의 동작 원리가 시뮬레이터에 적절하게 반영되었음을 확인할 수 있다. 구축한 전자전 송수신 시뮬레이터는 전자전 수집 시스템에서 추출된 위협체의 특성 변수가 실제 위협체의 특성 변수에서 어떻게 변형되었는지를 관찰하고, 다양한 전자전 상황에서 수집된 변수를 토대로 구성한 위협체 역추적 시스템의 성능을 평가하는 데에 활용될 수 있다.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.352-356
• /
• 2014

Purpose: We estimated the dietary qualities of green soybean (edamame) by using a specialized NIR transmission spectrometer to determine the constitutive properties of the soybean, such as the sucrose content and ninhydrine reaction quantity (NRQ; defined by the ninhydrine reaction, which has a high positive correlation with the total free amino acids), with the purpose of establishing a quality assurance system. Methods: We used a newly developed spectrometer probe that enables in situ estimation of the constituents of the soybean. Results: The calibration results obtained using a wavelength range of 760-960 nm were characterized by $R^2$ = 0.57 and standard error of cross-validation (SECV) of 0.78% for sucrose, and $R^2$ = 0.59 and SECV = 0.35% for NRQ. Conclusions: These results are inferior to those of our previous study obtained using a specialized bench-type transmission spectrometer. The poorer results are attributed to several possible reasons, including the effect of direct sunlight and the unstable sample presentation. We plan to conduct further study using improved optical layout and sample presentation.

• 정보처리학회논문지C
• /
• 제10C권6호
• /
• pp.711-716
• /
• 2003

인터넷상에 분산된 시스템들의 시각동기(time synchronization) SNTP(Simple Network Time Protocol) 의 시각동기모델을 분석하고 안정딘 시각오프셋을 제공할 수 있는 새로운 시각동기모델을 제안한다 SNTP 가 사용면에서는 간다나나 다영한 오류 요소를 구려하지 않으므로 인해 발생하는 안정성 면에서는 단점을 보완하기 위해 SNTP 시각 오프셋 추정식을 분석한다. 분석 결과로 추정된 시각 오프셋이 동적 오류 요소인 송신지연과 수신지연의 차이를 대표적인 오류 요소로 내포하고 있음을 확인하고 송수신 지연차를 적용한 새로운 시각동기 모델로 동적선형모델을 적용한 시각오프셋 추정 모델을 제안한다. 그리고 실측을 통한 송수신 지연차의 특성을 분석 결과로 제시한다.