• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.69-76
• /
• 2015

In this paper, we propose and analyze a M-ary transmission scheme in time hopping ultra-wide band(UWB) system using mutually orthogonal modified Hermite polynomial(MHP) pulses. The proposed M-ary transmission scheme employs the orthogonal property between different ordered pulses and N data bits make the M-ary signals by linear combination of M MHP pluses. The theoretical analysis and simulation results show that the proposed system has better performance and higher data rate than conventional M-ary UWB system. We derive the general form of correlation function for MHP pulses and analyze bit error rate(BER) performance over additive white Gaussian noise(AWGN) with the presence of timing jitter. We show that the proposed system has the improved BER performance and robustness to timing jitter and low power spectrum density compared with conventional M-ary UWB system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.91-97
• /
• 2019

Rotating machining unit is a revolutionary product that can process worm shaft or spiral shaft with fast and precise, a rotary type cutting tool, which is attached to automatic lathe and processes spiral groove on outer circumference of round bar. In this work, a study on micro tooth shape modification method of driving gear train in the rotating machining unit was presented. To observe the effect on power transmission characteristics of the driving gear pair, visualize the gear meshing condition and the load distribution on the gear teeth by using the professional gear train analysis program RomaxDesigner. By comparing the repeated analysis results, the effect of micro tooth shape modification on power transmission characteristics on driving gear can be summarized. The optimized gears were fabricated and measured by precision tester as a validation in this research.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.20-23
• /
• 2001

Stability aspects have often been incorporated in the dispatch/pricing procedure using trial and error methods, or approximated in the dispatch optimization directly as a set of linear constraints on generation/transmission. This paper presents introduction of PSS/OPF and voltage instability analysis using the program. Additional advantages offered by FSS/OPF are easier procedures, less computation and avoidance of engineering judgement in identifying the amount of shunt requrement at the candidate buses.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.731-742
• /
• 2010

We propose an incremental relaying protocol in conjunction with opportunistic communication for differential modulation with an aim to make efficient use of the degrees of freedom of the channels by exploiting a imited feedback signal from the destination. In particular, whenever the direct link from the source to the destination is not favorable to decoding, the destination will request the help from the opportunistic relay (if any). The performance of the proposed system is derived in terms of average bit error probability and achievable spectral efficiency. The analytic results show that the system assisted by the opportunistic relaying can achieve full diversity at low SNR regime and exhibits a 30㏈ gain relative to direct transmission, assuming single-antenna terminals. We also determine the effect of power allocation on the bit error probability BEP) performance of our relaying scheme. We conclude with a discussion on the relationship between the given thresholds and channel resource savings. Monte-Carlo simulations are performed to verify the analysis.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.184-196
• /
• 2019

Wavelet packet modulation (WPM) is a multicarrier modulation (MCM) technique that has emerged as a potential alternative to the widely used orthogonal frequency-division multiplexing (OFDM) method. Because WPM has overlapped symbols, equalization cannot rely on the use of the cyclic prefix (CP), which is used in OFDM. This study applies linear minimum mean-square error (MMSE) equalization in the time domain instead of in the frequency domain to achieve low computational complexity. With a modest equalizer filter length, the imperfection of MMSE equalization results in subcarrier attenuation and noise amplification, which are considered in the development of a bit-loading algorithm. Analytical expressions for the bit error rate (BER) performance are derived and validated using simulation results. A performance evaluation is carried out in different test scenarios as per Recommendation ITU-R M.1225. Numerical results show that WPM with equalization-aware bit loading outperforms OFDM with bit loading. Because previous comparisons between WPM and OFDM did not include bit loading, the results obtained provide additional evidence of the benefits of WPM over OFDM.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9B
• /
• pp.1226-1235
• /
• 2001

The convergence analysis of the improved multiplication free adaptive digital filter (IMADF) with a fractionally-spaced equalizer (FSE) to remove the intersymbol interference (ISI) in fast data transmission is presented. The IMADF structure use the one-step predicted filter in the multiplication-free adaptive digital filter (MADF) structure using the DPCM and Sign algorithm. In the experimental results, the IMADF algorithm has reduced the computational complexity by use of only the addition operation without a multiplier. Also, under the condition of identical stationary-state error, it could obtain the stabled convergence characteristic that the IMADF algorithm is almost same as the sign algorithm, but is better than the MADF algorithm. Here, this algorithm has effective characteristics when the correlation of the input signal is highly.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1565-1567
• /
• 1994

This paper describes a methodology for the three dimensional electric field calculation around parallel and orthogonal transmission lines. A nonuniform modeling method of finite line using linear line charges is proposed through the error analysis, Several examples of three dimensional electric field calculation are carried out by this method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.603-610
• /
• 2008

In this paper, analytical methods for calculating the average probability of bit error of direct sequence pulse amplitude modulation ultra wideband (DS-PAM UWB) system and time hopping pulse position modulation ultra wideband (TH-PPM UWB) system are given. For the multi-user DS-PAM UWB system, the bipolar pulse amplitude modulation is used in order to achieve better performance. As we know, more attention is paid to the TH-PPM UWB systems recently. In this paper. we first introduce the accurate BER calculation methods of the multi-user DS-PAM UWB and TH-PPM UWB systems and then give the performance analysis over the ideal AWGN channel and a correlation receiver. Furthermore, we also introduce their applications in image transmission and data transmission and give the simulation results. The analytical method yields simple and exact formulas relating the performance to the system parameters.

• Journal of Communications and Networks
• /
• v.4 no.3
• /
• pp.189-198
• /
• 2002

Precoder has been shown to be able to provide source diversity and design flexibility. In this paper we employ precoding techniques for block transmission based on a multirate filterbank structure. To accommodate multiuser communication with variable data rates, different precoders with corresponding coefficients and up/down sampling rates are used. However, due to unknown multipath distortion, different interferences may exist in the received data, such as multiuser interference, intersymbol interference and interblock interference. To estimate channel parameters for a desired user, we employ all structured signature waveforms associated with different symbols of that user and apply subspace techniques. Therefore better performance of channel estimator can be achieved than the conventional subspace method based only on the signature of the current symbol. The delay for that user can also be jointly estimated. Channel identifiability conditions and asymptotic channel estimation error are investigated in detail. Numerical examples are provided to justify the proposed method. gest either multicode (MC) or multiple processing gain (MPG) mechanism [2], while requiring data rates to be integral multiples of some basic low-rate. In order to support variable rate transmission however, a comprehensive scheme needs to be investigated.

• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.59-78
• /
• 2010

This paper tries to apply the asymmetrical price transmission(APT) behavior observed in the agricultural industry to supply chains of the domestic fishery industry by a statistical manner. The fore mentioned asymmetrical price transmission refers to when price movements in the later stage of the supply chain do not move in a normal or symmetrical manner corresponding to price movements in the earlier stage of the supply chain. Therefore, when the earlier stage price increase and the later stage price increases to a larger degree, it is called positive(+) asymmetry and the opposite behavior is called negative(-) asymmetry. The study examines the data from domestic producers of three fresh fish types, hairtail, mackerel, and cuttlefish, and tries to examine the price asymmetry between the producer or farm, wholesaler, and retail prices via an APT test utilizing unit root, cointegration, and error correction model. The study found, hairtail wholesale and retail pricing bas a negative asymmetric relationship while mackerel has a negative asymmetric pricing relationship at the producer and retail levels of the supply chain. In the case of cuttlefish, all levels of the supply chain showed negative asymmetrical behavior in the supply chain price transmission, meaning the earlier stage price changes are more rapidly and greatly inputted in the later stage of the supply chain pricing. We believe that the reason why the analysis results show negative price asymmetry is due to the uniqueness of fishery products having an important variable such as freshness. If price increases are greater and quicker than price decreases, then consumer demand, which is sensitive to price increases will decrease and subsequently result in the increase of inventory levels, reducing profits for retailers. Also, frozen hairtail, mackerel, and cuttlefish will act as substitute goods to fresh fishery products. Therefore, fresh fishery products have a high demand of price elasticity. When prices increase, demand quickly decreases. Therefore the profit of wholesalers and retailers to decrease, I think this is the main reason of APT in the supply chain of Korea' s fisheries industry.