• 대한간호학회지
• /
• 제37권6호
• /
• pp.976-985
• /
• 2007

Purpose: The aim of this study was to identify the present situation of hospital infection and route of infection by clarifying the transmission aspect of methicillin-resistant Staphylococcus aureus(MRSA) in a Neurosurgical Intensive Care Unit by analysing genotype. Methods: MRSA was cultured from twenty five patients with a tracheostomy, twenty five health care workers, and environments in the Neurosurgical Intensive Care Unit of one hospital in D city. Data was collected from December 21, 2004 to November 5, 2005. MRSA isolates representing each genotype were analyzed by spaA typing and a multiplex PCR method capable of identifying the structural type of the staphylococcal cassette chromosome mec(SCCmec) carried by the bacteria. Results: As the same genotype and gene sequence were found among health care workers, patients, and environments, it was assumed that there was cross transmission among them. Conclusion: This study suggests that first, as the hospital infection by MRSA between health care workers and patients in the Neurosurgical Intensive Care Unit was due to result of cross transmission and the relevance of transmission between them was verified, it is necessary to take preventive measures and conduct education. Secondly, development of nursing interventions and study of infection are needed. Thirdly, consistent investment in prevention against hospital infections and environmental renovation is needed.

• Composites Research
• /
• 제34권1호
• /
• pp.63-69
• /
• 2021

일체형 방열 및 기체 차단 재료 개발을 위하여 신규 고분자를 합성하고 판상형 육방정 질화 붕소(hBN) 필러를 포함하는 복합소재를 제조하였다. 복합소재는 필러의 크기 및 함량에 따라 열전도도 및 산소투과도 조절이 가능하였다. 복합소재는 최대 28.0 W·m-1·K-1의 높은 열전도도를 지녔으며 필러 미포함 샘플 대비 산소투과도는 62% 감소하였다. 열전도도 및 기체투과도 실험 측정값과 모델 예측값 비교를 통해 복합소재 내 필러의 종횡비를 계산하였다. 이러한 결과를 토대로 높은 열전도도 및 낮은 기체투과도는 필러 간 효과적인 네트워크 형성 때문이며 이는 복합소재 제조 시 전단 응력 극대화가 가능한 신규 수지의 특성으로부터 유래된것으로 사료된다. 또한, 열전도도로부터 계산된 필러 종횡비와 산소 투과도로부터 계산된 필러 종횡비 값이 서로 다름을 확인하였고 이에 관련하여 복합소재에서 열 전달 및 기체 투과 메커니즘에 대하여 고찰하였다. 본 연구에서 개발된 높은 열전도도 및 낮은 산소투과도를 갖는 고분자 복합소재는 전자 제품의 일체형 방열 및 산화 방지 재료로 사용 될 수 있다.

• 유공압시스템학회논문집
• /
• 제6권3호
• /
• pp.10-15
• /
• 2009

The major system of an agricultural power-shift tractor is the transmission, using power-shift. Because the transmission performance depends on the hydraulic control system, the most important aspect of the optimization is the design of the hydraulic control system. This study was conducted to improve a pressure modulation characteristics of the power-shift transmission hydraulic system. It has been tried to replace an existing pressure modulation method with a digital control by using HSSV(High Speed Solenoid Valve). The performance of the PWM control system in power-shift hydraulic transmission has been evaluated by means of experiment.

• 한국인터넷방송통신학회논문지
• /
• 제13권1호
• /
• pp.77-82
• /
• 2013

주기가 다른 격자들로 구성된 평면 DFB 도파로의 필터 특성들을 등가 전송선로 망을 사용하여 구현하였다. 대역 필터 특성과 공진 특성을 정확하게 분석하기 위하여 Floquet 이론과 Babinet 원리에 기초한 종방향 모드 전송선로 이론 (L-MTLT)을 제시하였다. 수치해석 결과, 본 논문에서 제시한 해석법은 주기가 다른 격자들로 구성된 DFB 도파로의 필터 특성들을 분석하기 위한 간단한 수치 해석적 알고리즘을 제공하였으며, DFB 필터의 대역폭과 사이드로브의 억압특성 각 영역에서의 격자개수와 격자 종횡비 (aspect ratio)에 민감하게 의존함을 보였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.582-585
• /
• 2012

The aluminum extruded panel used for a high speed train shows the largest contribution to sound insulation performance of the train body. However, comparing with the flat panel having the same weight, the transmission loss falls sharply in the local resonance frequency band. Such fall of transmission loss can be improved by increasing the damping of local resonance. This study examines the charging effect of an urethane foam on the aluminum extruded panel of a high speed train. We charged the urethane foam with different mass density and in different way in the core part of the extruded panel. We measure the transmission loss and compare the sound insulation performance according to the density and charging method. Finally, Improvement effect of the transmission loss is compared and analysed in aspect of weight increment.

• Carbon letters
• /
• 제28권
• /
• pp.72-80
• /
• 2018

In this study, an empirical relationship between the energy band gap of multi-walled carbon nanotubes (MWCNTs) and synthesis parameters in a chemical vapor deposition (CVD) reactor using factorial design of experiment was established. A bimetallic (Fe-Ni) catalyst supported on $CaCO_3$ was synthesized via wet impregnation technique and used for MWCNT growth. The effects of synthesis parameters such as temperature, time, acetylene flow rate, and argon carrier gas flow rate on the MWCNTs energy gap, yield, and aspect ratio were investigated. The as-prepared supported bimetallic catalyst and the MWCNTs were characterized for their morphologies, microstructures, elemental composition, thermal profiles and surface areas by high-resolution scanning electron microscope, high resolution transmission electron microscope, energy dispersive X-ray spectroscopy, thermal gravimetry analysis and Brunauer-Emmett-Teller. A regression model was developed to establish the relationship between band gap energy, MWCNTs yield and aspect ratio. The results revealed that the optimum conditions to obtain high yield and quality MWCNTs of 159.9% were: temperature ($700^{\circ}C$), time (55 min), argon flow rate ($230.37mL\;min^{-1}$) and acetylene flow rate ($150mL\;min^{-1}$) respectively. The developed regression models demonstrated that the estimated values for the three response variables; energy gap, yield and aspect ratio, were 0.246 eV, 557.64 and 0.82. The regression models showed that the energy band gap, yield, and aspect ratio of the MWCNTs were largely influenced by the synthesis parameters and can be controlled in a CVD reactor.

• 가정과삶의질연구
• /
• 제15권1호
• /
• pp.191-200
• /
• 1997

The purpose of this research was to test a model of intergenerational transmission of marital instability. An important aspect of the present study was to test the direct and indiect intergenerational transmission processes of marital instability. This study revealed four very important findings. First the effects of parental divorce on children's marital instability were both direct and indirect through mate selection risk factors marital quality and marital commitment. Second premarital backgrounds such as socioeconomic status of parents and relative heterogeneity between spouse before marriage were important to explain one's marital relationship. Third the higher the barriers the higher the marital commitment. Fourth marital quality and marital commitment were important predictors of marital instability. Taken together this study supports the intergenerational transmission perspective that exposure to conflict marriage in one's own childhood would forecast lower marital sat sfaction higher conflict and higher marital instability in the marital relationship. The findings from this study also underline the importance of predisposing marital characteristics such as parental socioeconomic status and relative heterogeneity in explaining marital relationship.

• 정보관리연구
• /
• 제31권4호
• /
• pp.88-98
• /
• 2000

우리 정부가 1999년 12월에 개정한 저작권법 중 도서관에서의 복제 및 온라인 전송과 관련 한 용어 및 규정을 검토하였다. 그리고, 디지털 환경에서 원문정보를 제공함에 있어서 관계되는 저작권법과 도서관의 대응방안을 검토한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1149-1152
• /
• 1997

This paper describes a novel approach for allocating transmission costs among users of transmission services. In the suggested approach, the cost share of each participant is proportional to amount of its line flow. To develop individual user's impact, the line utilization factors of each participant are derived by power flow equations of all nodes (i.e., load-flow equations). To deal With the slack bus problem inherent in the conventional load-flow analysis more practically, a additional power supply/demand balance equation is incorporated. Although the developed allocation rule is basically similar to the existing MW-mile method in the aspect of embedded cost allocation, it does not require to get load flow solutions of each wheeling transaction when multiple transmission transactions are considered.

• 유공압시스템학회논문집
• /
• 제6권4호
• /
• pp.16-23
• /
• 2009

The major system of an agricultural shuttle power-shift tractor is the transmission, using power-shift. Because the shifting performance depends on the hydraulic control system, the most important aspect of the optimization is the design of the hydraulic control system. This study was conducted to develop the simulation model of hydraulic control system for the shuttle power-shift transmission by using Easy5 software. Bench test was conducted to verify the simulation. Also, the design parameters which influence the pressure modulation characteristics were investigated.