• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.43-50
• /
• 2007

In a high-speed flash style or a pipelining style analog-to-digital converter (A/D converter), the DC reference fluctuation caused by external noises becomes serious, as the sampling frequency is increased. To reduce the fluctuations in conventional A/D converters, capacitors have been simply used, but the layout area was large. Instead of capacitors, a low-noise and small-size DC reference circuit based on transmission gate (TG) is proposed in this paper. In order to verify the proposed technique, we designed and manufactured a 6-bit 2GSPS CMOS A/D converter. The A/D converter is designed with a 0.18um 1-poly 6-metal n-well CMOS technology, and it consumes 145mW at 1.8V power supply. It occupies the chip area of 977um by 1040um. The measured result shows that SNDR is 36.25 dB and INL/DNL is within 0.5LSB, even though the DC reference fluctuation is serious.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.4
• /
• pp.153-156
• /
• 1984

A local area network(LAN) controller is designed according to non-persistent CSMA protocols. By meas of a buffer register, a microcomputer interfaces with the LAN controller. To keep bus utilization near the optimal efficiencies, the transmission intervals are adjusted as a function of $2^n$. A message in the form of a packet consisting of 128bytes is transitted to the bus. The maximum transmission rate of 19.2Kbps is obtained at layer 1.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.311-321
• /
• 2014

This paper focuses on contention-based medium access control (MAC) protocols used in wireless local area networks. We propose a novel MAC protocol called adaptive backoff tuning MAC (ABTMAC) based on IEEE 802.11 distributed coordination function (DCF). In our proposed MAC protocol, we utilize a fixed transmission attempt rate and each node dynamically adjusts its backoff window size considering the current network status. We determined the appropriate transmission attempt rate for both cases where the request-to-send/clear-to-send mechanism was and was not employed. Robustness against performance degradation caused by the difference between desired and actual values of the attempt rate parameter is considered when setting it. The performance of the protocol is evaluated analytically and through simulations. These results indicate that a wireless network utilizing ABTMAC performs better than one using IEEE 802.11 DCF.

• Journal of Sensor Science and Technology
• /
• v.25 no.3
• /
• pp.189-195
• /
• 2016

In this paper, we newly introduce a visible light communication (VLC) repeater using the LED array in an LED lamp. The LED array is used for a light source in the repeater, which radiates light both for illumination and data transmission. A VLC repeater is made by adding some electronic circuits to the LED array including a photodetector, a demodulator, and a modulator. The repeater is installed on the ceiling of a room like a conventional LED lamp, receives the VLC signal from an arbitrary transmitter, recovers data, and radiates the signal to wide area in the room. We used a carrier frequency of 100 kHz for the uplink from a transmitter to the repeater, and 500 kHz for the downlink from the repeater to a receiver. The repeater is useful for increasing the transmission path to wide area over the obstacles that may exist between VLC transmitters and receivers.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.21-29
• /
• 1994

Three protocols based on the slotted Aloha technique are proposed for very high-speed optical fiber local area networks using wavelength division multiplexing (WDM) passive star topology and the throughputs and delays are derived. For getting a high probability in successful transmission of control packets determining the transmission of a data packet, we adopt control mini slot groups in these protocols. The retransmission probability is also considered in analysis. Both throughput and delay of three protocols are compared and analyzed by varying the number of control solt groups, the retransmission probability the length of a data packet and the number of channels. The numerical analysis shows that the proposed protocols adopted the control slot groups give the increase of throughput and the decrease of delay.

• Advances in aircraft and spacecraft science
• /
• v.5 no.5
• /
• pp.533-550
• /
• 2018

Detonation transmission between propane/oxygen (donor) and propane/air (acceptor) with an abrupt area change is experimentally studied. In the donor, there are two types of incident detonation waves: A self-sustained Chapman-Jouguet (CJ) detonation wave and an overdriven detonation wave that is a result of the difference in the initial donor pressure ratios. The piston work is used to characterize the strength of the incident detonation wave. For an incident CJ detonation wave, the re-initiation of a detonation wave in the acceptor depends on the initial pressure in the donor and the expansion ratio. The axisymmetric and non-axisymmetric soot patterns respectively correspond to direct detonation and detonation re-initiation. For an incident overdriven detonation wave, the re-initiation of a detonation wave in the acceptor strongly depends on the degree of overdrive.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.142-152
• /
• 2002

In this paper, we propose and analyze a new multiple access protocol for a local area optical Internet based on a wavelength division multiplexing technique which uses a passive star coupler. The proposed contention-based reservation protocol can support variable-length as well as fixed-length messages for transporting Internet packets with one reservation of a minislot at the beginning of a packet transmission. The minislot is used to reserve the data channel on the basis of the slotted ALOHA protocol and the control node ensures subsequent message transmission on the same wavelength. Thus, all messages need not be broken down to many fixed-length packets, and consecutive messages are transmitted through the same wavelength. Moreover, the proposed protocol reduces the collision probability of minislots and improves wavelength utilization. We determine the maximum throughput and verify the results with simulation.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2005.05a
• /
• pp.5-9
• /
• 2005

One of the imminent problems to be solved within wireless sensor network is to balance out energy dissipation among deployed sensor nodes. In this paper, we present a transmission relay method of communications between BS (Base Station) and CHs (Cluster Heads) for balancing the energy consumption and extending the average lifetime of sensor nodes by the fuzzy logic application. The proposed method is designed based on LEACH protocol. The area deployed by sensor nodes is divided into two groups based on distance from BS to the nodes. RCH (Relay Cluster Head) relays transmissions from CH to BS if the CH is in the area far away from BS in order to reduce the energy consumption. RCH decides whether to relay the transmissions based on the threshold distance value that is obtained as a output of fuzzy logic system. Our simulation result shows that the application of fuzzy logic Provides the better balancing of energy depletion and Prolonged lifetime of the nodes.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.318-331
• /
• 2000

Electrical and tribological behaviours of a copper-graphite brush in a slipring-brush assembly were investigated to evaluate the characteristics of electric signal transmission between a slipring and a brush. Five brush materials containing different amounts of copper and graphite were studied. The result showed that a copper-graphite brush at a particular graphite content exhibited the most stable frictional and electrical behaviour suggesting an optimum amount of a solid lubricant in a metal-graphite brush system. Microscopic observation and the surface analysis showed good agreements with this phenomena. In addition, the deviation of the friction coefficient and electric signal distortion has a close relationship with a microscopic mechanical vibration and the change of a real contact area.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.14-15
• /
• 2003

Polymer optical fibers (POFs) are being considered as important high-speed communication media in the area of local area networks, datalinks and optical sensors. Large core diameter (500～1000 $\mu$m) and large numerical aperture (0.2~0.9) in a POF allow easy processing and connectorization, low cost high efficiency of beam coupling from LDs or LEDs, and complete immunity to EMI／EMR. There are many reports about 2.5 Gbps transmission the polymethylmethacrylate (PMMA) graded index (GI) POF over a distance of 100 m. (omitted)