• 제목/요약/키워드: Transmission/Receiving System

검색결과 276건 처리시간 0.021초

초전도 코일을 적용한 자기공명방식 무선전력전송의 송·수신 코일 배열에 따른 효율 분석 (Efficiency Analysis of Magnetic Resonance Wireless Power Transmission using Superconductor Coil According to the Changing Position of Transmission and Receiving Coils)

  • 강민상;최효상;정인성
    • 전기학회논문지
    • /
    • 제63권6호
    • /
    • pp.776-779
    • /
    • 2014
  • In this paper, we analyzed the efficiency of magnetic resonance wireless power transmission (WPT) using superconductor coil according to the changing position of transmission and receiving coils. We implemented a WPT system using a magnetic resonance at a frequency of 63.1 kHz. Transmission and receiving coils using superconductor coil were wound on a spiral manner of diameter 100mm. For comparison, transmission and receiving coils using normal conductor coil were designed under the same condition. At a distance of 50mm, we measured efficiency when transmission-receiving coils were matched 25%, 50%, 75% and 100%. When a superconductor coil was applied to the transmission and receiving units, efficiency of WPT was very high. In addition, in the case of the superconducting transmission-receiving coils, when coils matched 100% the efficiency was 30% and matched 25% the efficiency was 8%.

5.8GHz 25W 무선전력전송 시스템 개발 및 측정 (5.8GHz 25W Microwave Wireless Power Transmission System Development and Measurement)

  • 이성훈;손명식
    • 반도체디스플레이기술학회지
    • /
    • 제18권1호
    • /
    • pp.21-24
    • /
    • 2019
  • In this paper, 5.8GHz 25W microwave wireless power transmission system was developed. The transmission system is composed of a signal generator, a 1W drive amplifier, a 25W power amplifier, and a circularly polarized transmission antenna. The receiving system was fabricated with an integrated receiver that combines a circularly polarized receiving antenna, a pass band filter, and an RF-DC converter. And a multi-integrated receiver had twelve parts, including an integrated receiver. Under the conditions, voltage and current were measured for the system at 5cm intervals from a minimum distance of 5cm to a maximum distance of 80cm. The power was calculated for the system. The results of the system are shown in tables and graphs. The power decreases with distance, but the power does not drop sharply due to a multi-integrated receiver.

단일주파수방송망 구축을 위한 클라우드 전송 시스템에서의 다중 안테나 수신 성능 분석 (Performance Analysis of Multiple-Antenna Receiver in Cloud Transmission System for Building Single Frequency Networks)

  • 곽계석;김재길;안재민
    • 한국통신학회논문지
    • /
    • 제39A권8호
    • /
    • pp.474-480
    • /
    • 2014
  • 본 논문은 클라우드 전송 시스템의 수신 성능을 향상시키기 위해 다중 수신 안테나를 적용하는 단일주파수방송망 기반의 차세대 지상파 방송 기술에 대하여 연구하였다. 다중 수신 안테나를 채용함으로써 단일주파수방송망 경계지역에서의 방송 신호 수신이 분산 MIMO(Multi Input Multi Output) 시스템으로 모델링을 하였고, MIMO 수신기의 간섭 제거 효과로 단일 안테나 수신기를 적용하는 것보다 인접 방송 권역 간섭을 감소시킬 수 있다. 모의실험을 통해 클라우드 전송 시스템에 다중 안테나 수신기를 적용하면 단일주파수방송망 경계지역에서의 수신 성능 개선이 이루어짐을 확인하였다.

무인항공기 체계의 영상송수신장비 개발 (Development of Image Transmission and Receiving System for UAV)

  • 김상한;조성준;백윤혁;이재녕;정숙향;문우근;배진근;박대섭
    • 한국항공운항학회:학술대회논문집
    • /
    • 한국항공운항학회 2004년도 추계학술발표대회 논문집
    • /
    • pp.275-278
    • /
    • 2004
  • In this paper, development of the Image Transmission and Receiving System(ITRS) for UAV is being introduced. ITRS can tranfer the imagery informations from UAV to the multiple sites at the same time. Analog video signal is encoded by using MPEG4 protocol at the Image Transmission System, and the encoded digital video data can be transmitted to the various locations where the Image Receiving System decodes and displays the received video data. The ITRS might be a very efficient method of sharing UAV's information at a low cost.

  • PDF

CDMA 기반 IMT-2000 수신기 잡음지수 분석 (Noise Figure Analysis of IMT-2000 Receiver system Based on CDMA)

  • 이철희
    • 한국통신학회논문지
    • /
    • 제25권9B호
    • /
    • pp.1579-1587
    • /
    • 2000
  • This paper presents the properties of the RF part in the receiving system based in IMT-2000 terminal technology. It mainly discuss the RF parameter performance of the receiving system for mobile telecommunication comparable to IS-98A and J-STD-018 specifications of commercially available CDMA and PCS, and is to anticipate the processing gain of the IMT-2000 receiving system, processing gain according to data processing rate, and terminal noise figure according to processing gain, relationship between noise figures according to Eb/Nt, Ioc. It is performed by such analysis method as CDMA and PCS receiving systems. Transmission bandwidth is n$\times$1.25 MHz(n=1, 3, 6, 9, 12) which is recommended by Qualcomm and NTT, the leading company in cdma 2000. Data transmission rate of IMT-2000 is classified into three cases as in moving vehicle environment of 144Kbps, outdoor pedestrian environment of 384Kbps, and indoor office environment of 2Mbps

  • PDF

Three-coil Magnetically Coupled Resonant Wireless Power Transfer System with Adjustable-position Intermediate Coil for Stable Transmission Characteristics

  • Chen, Xuling;Chen, Lu;Ye, Weiwei;Zhang, Weipeng
    • Journal of Power Electronics
    • /
    • 제19권1호
    • /
    • pp.211-219
    • /
    • 2019
  • In magnetically coupled resonant (MCR) wireless power transfer (WPT) systems, the introduction of additional intermediate coils is an effective means of improving transmission characteristics, including output power and transmission efficiency, when the transmission distance is increased. However, the position of intermediate coils in practice influences system performance significantly. In this research, a three-coil MCR WPT system is adopted as an exemplification for determining how the spatial position of coils affects transmission characteristics. With use of the fundamental harmonic analysis method, an equivalent circuit model of the system is built to reveal the relationship between the output power, the transmission efficiency, and the spatial scales, including the axial, lateral, and angular misalignments of the intermediate and receiving coils. Three cases of transmission characteristics versus different spatial scales are evaluated. Results indicate that the system can achieve relatively stable transmission characteristics with deliberate adjustments in the position of the intermediate and receiving coils. A prototype of the three-coil MCR WPT system is built and analyzed, and the experimental results are consistent with those of the theoretical analysis.

1[MHz] 대역의 자계 공명을 이용한 무선 전력 전송 장치에 관한 연구 (A Study on the Wireless Power Transfer System using Magnetic Resonance at the 1[MHz] Frequency Band)

  • 박정흠
    • 조명전기설비학회논문지
    • /
    • 제26권1호
    • /
    • pp.75-81
    • /
    • 2012
  • In this paper, the wireless power transfer system using the magnetic resonance was designed, analyzed by circuit analysis methode and the calculated transfer function was compared with the measured one. The self-resonant coil was made up of the commonly used capacitor which had the lumped capacitance and it enabled the stable magnetic resonance not to be affected by the circumstance. The transmission efficiency of this system was 70[%] at the 15[cm] between the transmission and receiving coil and the measured transfer function was similar to the calculated one, which means the circuit analysis methode is valid in this system. When the intermediate coils were added between the transmission and receiving coil, the transmission efficiency was increased, which produced the increase of transfer distance. In the case of the five intermediate coils adding, the 35[%] transmission efficiency was achived at the 90[cm] distance.

시험자료 획득을 위한 영상 송수신 시스템 구현 (Implementation of Video Transmitting and Receiving System for Acquisition of Test Data)

  • 류상규
    • 한국군사과학기술학회지
    • /
    • 제20권5호
    • /
    • pp.681-687
    • /
    • 2017
  • This paper presents about an implementation of Video Transmitting and Receiving System(VTRS) for acquiring test data. The VTRS consists of two parts. The first is Transmitter Unit(TU) that is installed on a missile to acquire various kinds of data and transmit the data to the ground through RF signals. The second is Receiver Unit(RU) that receives the transmitted RF signals and reconstruct those to the original data. To gather a high speed data reliably and securely on the ground, the TU is designed by considering data transfer scheme, data compression, modulation method, encryption technic, link budget, and antenna radiation pattern. Further, a placement method of multiple receiving stations is suggested. The VTRS has been tested on a field to check the link margins and maximum receiving distance in a real environment. Finally, the VTRS is applied to a missile flight test and gathered high speed data reliably.

지속적인 심장질환 모니터링을 위한 인체 삽입형 생체 센서의 무선전력전송 시스템 (Development and Application of Wireless Power Transmission Systems for Wireless ECG Sensors)

  • 허진철;이종하
    • 융합신호처리학회논문지
    • /
    • 제20권2호
    • /
    • pp.111-117
    • /
    • 2019
  • 전자기 유도형 무선전력전송에서는 송신 코일과 수신 코일의 상대적 위치에 따른 자기장 분포와 동력 전달 효율이 매우 중요하다. 본 연구는 ECG 센서를 사용한 HFSS 시뮬레이션 결과를 실제 측정 결과와 비교하였다. 시뮬레이션 결과 송신 코일과 수신 코일 간의 정렬이 어느 정도 변경 되더라도 전송효율은 비교적 안정적으로 유지 될 수 있음이 나타났다. 수신 코일의 중심이 송신 코일의 중심과 완벽하게 일치하면 전송효율이 최대가 되며, 수신 코일의 중심이 송신 코일의 중심으로부터 ± 10mm 내의 이동은 전송효율의 감소가 크지 않음을 확인 하였으며, 무선 전력 전송 시스템의 성능이 크게 저하되지 않는 것으로 확인 되었다. 본 결과는 이식형 센서를 위한 무선 전력의 활용에서 무선 전송의 표준화 된 적용 방법을 제안한다. 이를 통해 이식형 임플란트의 개발에 있어 무선전력전송에 대한 기준을 제시하고, 관련 디바이스의 개발에 적용 할 수 있을 것으로 판단된다.

Beam Efficiency of Wireless Power Transmission via Radio Waves from Short Range to Long Range

  • Shinohara, Naoki
    • Journal of electromagnetic engineering and science
    • /
    • 제10권4호
    • /
    • pp.224-230
    • /
    • 2010
  • Wireless power transmission (WPT) is useful technology in near future. There are some kinds of the WPT technologies, WPT via radio waves, resonance coupling, and inductive. Especially the WPT via radio waves is used for multi-purposes from short range to long range application. However, unfortunately it is misunderstood that it is low efficiency and low power. In this paper, I show the theory of beam efficiency between transmitting antennas and receiving antennas and also show some high efficient applications of the WPT via radio waves. Especially, I pick up a wireless power charging system of an electric vehicle and show the experimental results. I show difference between the theory of beam efficiency and the experimental results of short range WPT. I indicate that reasons of poor beam efficiency in the experiment are (1) change of impedance caused by mutual coupling between transmitting antennas and receiving antennas, (2) oblique direction of microwave power to receiving antennas caused by short distance.