Noise Figure Analysis of IMT-2000 Receiver system Based on CDMA

CDMA 기반 IMT-2000 수신기 잡음지수 분석

  • 이철희 (조선대학교 공과대학 전자정보통신공학부)
  • Published : 2000.09.01

Abstract

This paper presents the properties of the RF part in the receiving system based in IMT-2000 terminal technology. It mainly discuss the RF parameter performance of the receiving system for mobile telecommunication comparable to IS-98A and J-STD-018 specifications of commercially available CDMA and PCS, and is to anticipate the processing gain of the IMT-2000 receiving system, processing gain according to data processing rate, and terminal noise figure according to processing gain, relationship between noise figures according to Eb/Nt, Ioc. It is performed by such analysis method as CDMA and PCS receiving systems. Transmission bandwidth is n$\times$1.25 MHz(n=1, 3, 6, 9, 12) which is recommended by Qualcomm and NTT, the leading company in cdma 2000. Data transmission rate of IMT-2000 is classified into three cases as in moving vehicle environment of 144Kbps, outdoor pedestrian environment of 384Kbps, and indoor office environment of 2Mbps

Keywords

References

  1. 이동통신 단말 기술/시장 보고서 한국 전자 통신 연구원
  2. IMT-2000 용 주파수 연구 정보 통신부
  3. 국내에 적합한 표준화 관련 (IMT-2000)국내에 적합한 표준화 현대 전자 산업 3G 시스템 기술 연구팀
  4. IMT-2000의 개념 및 정책, 기술동향 정보통신부
  5. 800MHz 대 디지털 이동전화 이동국의 최소 성능 표준 한국 통신기술협회
  6. Telecommunications Review v.20 no.7 A Study on the RF Reciving system Design for DS/CDMA Kim Nam Su
  7. IEEE VTC'92. Denver.co. On the Capacity of Spread Spectrum CDMA for Mobile Radio M.Heath;P.Newson
  8. IEEE Trans. on Vech. Tech. v.VT-40 On the Capacity of a Cellular CDMA System K.Gilhousen(et al.)
  9. La Jolla, Recommended Minimum Performance Standards for Dual-Mode Wideband Spread Spectrum Cellular Mobile Stations TIA/EIA
  10. Recommended Minimum Performance Standards for 1.8 to 2.0GHz Code Division Multiple Access Personal Stations TIA/EIA
  11. IEEE Journal on Selected Areas in Communications Techniques for Bit Error Rate in the Simulation of Digital Communication System M. C. Jeruchim
  12. Receiving System Design S. Erst
  13. Microwave Mixers(2nd Ed.) Stephen A. Mass
  14. Microwave Transistor Amplifiers Analysis and Design Guillermo Gonzalez
  15. Low Noise Design Handbook Gary A BReed
  16. RF Circuit Design Chris Bowick
  17. RF Circuit Design Chris Bowick
  18. CDMA System Engineering Training Handbook Qualcomm.
  19. Microwave Transistor Amplifiers Analysis and Design Guillermo Gonzalez
  20. Microwave Mixers(2nd Ed.) Stephen A. Mass
  21. Low Noise Design Handbook Gary A BReed
  22. Recommended Minimum Performance Standards for Dusl - Mode Wideband Spread Spectrum Cellular Mobile Stations La Jolla
  23. IEEE Trans. on Veh. Tech. v.VT-40 On the Capacity of a Cellular CDMA System K. Gilhousen(et al.)
  24. IEEE VTC'92. Denver. co. On the capacity of spread sprctrum CDMA for mobile radio M.Heath;P.Newson
  25. TELECOMMUNICATIONS REVIEW no.6 PCS기지국 RF송수신부의 설계 및 성능평가 장익수(외)