• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.7
• /
• pp.645-651
• /
• 2006

This study was performed to examine the relationship between quality characteristics and palatability on 21 varieties of commercial brand rice in North Kyeong-sang Province, Korea. The average percentages of translucent kernels, an important factor in rice quality, were the higher in the Ilpumbyeo cultivar than other six rice cultivars including Mihyangbyeo, Ilbanbyeo, Chuchungbyeo, Saechuchungbyeo, Hidomebore, and Nampyeongbyeo. The mean contents of amylose among commercial brand rice were not significantly different. The protein content was inversely associated with palatability (Toyo value). The sensory evaluation showed that clumpiness was positively correlated with the moisture content. The preference in color of cooked rice was increased as the percentage of translucent kernels increased. The roasted nutty flavor was highly correlated with the cooked rice with high protein content, while the chewiness was associated with high moisture and low amylose content.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.1
• /
• pp.8-13
• /
• 2014

PURPOSE. The purpose of this study was to evaluate whether surface treatments affect the translucency of laminate veneers with different shades and thicknesses. MATERIALS AND METHODS. A total of 224 disc-shaped ceramic veneers were prepared from A1, A3, HT (High Translucent) and HO (High Opaque) shades of IPS e.max Press (Ivoclar Vivadent) with 0.5 mm and 1.0 mm thicknesses. The ceramics were divided into four groups for surface treatments. Group C: no surface treatments; Group HF: etched with hydrofluoric acid; Group SB: sandblasted with 50-${\mu}m$ $Al_2O_3$; and Group L; irradiated with an Er;YAG laser. A translucent shade of resin cement (Rely X Veneer, 3M ESPE) was chosen for cementation. The color values of the veneers were measured with a colorimeter and translucency parameter (TP) values were calculated. A three-way ANOVA with interactions for TP values was performed and Bonferroni tests were used when appropriate (${\alpha}=0.05$). RESULTS. There were significant interactions between the surface treatments, ceramic shades and thicknesses (P=.001). For the 0.5-mm-thick specimens there were significant differences after the SB and L treatments. There was no significant difference between the HF and C treatments for any shades or thicknesses (P>.05). For the 1-mm-thick ceramics, there was only a significant difference between the L and C treatments for the HT shade ceramics (P=.01). There were also significant differences between the SB and C treatments except not for the HO shades (P=.768). CONCLUSION. The SB and L treatments caused laminate veneers to become more opaque; however, HF treatment did not affect the TP values. When the laminate veneers were thinner, both the shade of the ceramic and the SB and laser treatments had a greater effect on the TP values.

• Proceedings of the KACD Conference
• /
• 2003.11a
• /
• pp.623-623
• /
• 2003

I. Objectives The aim of this was to evaluate the use possibility of light curing flowable composite resins as a luting agent for translucent fiber posts. II. Materials and Methods 20 single-rooted maxillary central incisors were selected and crown was sectioned below the cemento-enamel junction to obtain a 13 mm ling root. Root canals were filed, cleaned, and shaped to ＃40 with K-file. Prepared canals were filled with gutta percha and AH26 root canal sealer by lateral condensation method. Teeth were than divided into 4 groups of 5 specimens each. In group 1 and 2, the canal space of each root was enlarged with ＃3 DT Light post preparation drill (Bisco, USA) to a depth of 9mm from the cervical.(omitted)

• Korean Journal of Ichthyology
• /
• v.33 no.2
• /
• pp.64-73
• /
• 2021

We examined the growth and age structure for chub mackerel caught by a large purseseine in the Korean waters from January to December 2015. A total of 459 specimens were used for otolith analysis, ranging from 19.6 cm to 46.0 cm in fork length. Translucent zone was regarded as an annual mark, and age was counted using the information of the number of translucent zone, capture date, edge type of the otolith and nominal birthdate of 1 January. Annuli in otoliths were mainly formed in May, coinciding with the spawning season. Estimated ages were 0~6 years, and the von Bertalanffy growth models were not significantly different between male and female. Sex-combined growth model was obtained as FL_t=39.3×{1-exp[-0.90×(t+0.033)]}. Among the chub mackerel caught in 2015, the age 2 group had the highest proportion (30.9%), and the age 0 to 2 group accounted for 88.5% of the total catch.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.5
• /
• pp.285-293
• /
• 2022

PURPOSE. This study evaluated the relationship among translucency, crystalline phase, grain size, and fracture toughness of zirconia. MATERIALS AND METHODS. Four commercial zirconia - Prettau^®Anterior^® (PA), Prettau^® (P), InCorisZI (ZI), and InCorisTZI (TZI)- were selected for this study. The bar specimens were prepared to determine fracture toughness by using chevron notched beam method with four-point bending test. The grain size was evaluated by a mean linear intercept method using a scanning electron microscope. X-ray diffraction and Rietveld refinement were performed to evaluate the amount of tetragonal and cubic phases of zirconia. Contrast ratio (CR) was measured to investigate the level of translucency. RESULTS. PA had the lowest fracture toughness among other groups (P < .05). In addition, the mean fracture toughness of P was significantly less than that of ZI, but there was no difference compared with TZI. Regarding grain size measurement, PA had the largest average grain size among the groups. P obtained larger grain size than ZI and TZI (P < .05). However, there was no significant difference between ZI and TZI. Moreover, PA had the lowest CR value compared with the other groups (P < .05). This means PA was the most translucent material in this study. Rietveld refinement found that PA presented the greatest percentage of cubic phase, followed by TZI, ZI, and P, respectively. CONCLUSION. The different approaches are used by manufacturers to fabricate various types of translucent zirconia with different levels of translucency and mechanical properties, which should be concerned for material selection for successful clinical outcome.

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.353-358
• /
• 2010

Objectives: The purpose of this study was to measure the power density of light curing units transmitted through resin inlays fabricated with direct composite (Filtek Z350, Filtek Supreme XT) and indirect composite (Sinfony). Materials and Methods: A3 shade of Z350, A3B and A3E shades of Supreme XT, and A3, E3, and T1 shades of Sinfony were used to fabricate the resin inlays in 1.5 mm thickness. The power density of a halogen light curing unit (Optilux 360) and an LED light curing unit (Elipar S10) through the fabricated resin inlays was measured with a hand held dental radiometer (Cure Rite). To investigate the effect of each composite layer consisting the resin inlays on light transmission, resin specimens of each shade were fabricated in 0.5 mm thickness and power density was measured through the resin specimens. Results: The power density through the resin inlays was lowest with the Z350 A3, followed by Supreme XT A3B and A3E. The power density was highest with Sinfony A3, E3, and T1 (p < 0.05). The power density through 0.5 mm thick resin specimens was lowest with dentin shades, Sinfony A3, Z350 A3, Supreme XT A3B, followed by enamel shades, Supreme XT A3E and Sinfony E3. The power density was highest with translucent shade, Sinfony T1 (p < 0.05). Conclusions: Using indirect lab composites with dentin, enamel, and translucent shades rather than direct composites with one or two shades could be advantageous in transmitting curing lights through resin inlays.

• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.299-304
• /
• 2015

Interaction of the the rust fungus Puccinia miscanthi with the biofuel plant Miscanthus sinensis during the teliospore phase was investigated by light and electron microscopy. P. miscanthi telia were oval-shaped and present on both the adaxial and abaxial leaf surfaces. Teliospores were brown, one-septate (two-celled), and had pedicels attached to one end. Transmission electron microscopy revealed numerous electron-translucent lipid globules in the cytoplasm of teliospores. Extensive cell wall dissolution around hyphae was not observed in the host tissues beneath the telia. Hyphae were found between mesophyll cells in the leaf tissues as well as in host cells. Intracellular hyphae, possibly haustoria, possessed electron-dense fungal cell walls encased by an electron-transparent fibrillar extrahaustorial sheath that had an electron-dense extrahaustorial membrane. The infected host cells appeared to maintain their membrane-bound structures such as nuclei and chloroplasts. These results suggest that the rust fungus maintains its biotrophic phase with most mesophyll cells of M. sinensis. Such a nutritional mode would permit the rust fungus to obtain food reserves for transient growth in the course of host alteration.

• Korean Journal of Food Science and Technology
• /
• v.51 no.6
• /
• pp.604-609
• /
• 2019

To control pathogenic E. coli in biofilm, bacteriophages were isolated from environmental samples. Seventeen isolates had depolymerase activities by translucent zones at the rims of plaques. To determine biofilm-forming ability, an abiotic plastic surface of polystyrene was used; E. coli O103 showed the highest biofilm formation at 30℃ after 24 h. Moreover, biofilm by E. coli O103 on the biotic surface of lettuce was observed by a scanning electron microscope. The bacteriophage cocktail of ΦNOECP40 and ΦNOECP44 showing depolymerase activities was prepared to eliminate the E. coli inbiofilm. By organic acids, reduction of E. coli in biofilm was insignificant and almost undetectable. However, the abundance of E. coli in biofilm was reduced by 3 log CFU/mL from 7.3 log CFU/mL after 60 min with the bacteriophage cocktail. Therefore, we suggest that bacteriophages with depolymerase could be utilized to effectively control pathogenic E. coli in biofilm.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1531-1540
• /
• 2002

With the invention of the inlaying technique for celadon in the latter half of the 12th century, the Koryo potters reached a new height of artistic and scientific achievement in ceramics chemical technology. Inlaid celadon shards, collected in 1991 during the surface investigation of Kangjin kilns found on the southwestern shore of South Korea, were imbedded in epoxy resin and polished for cross-section examination. Backscattered electron images were taken with an electron microprobe equipped with an energy dispersive spectrometer. The spectrometer was also used to determine the composition of micro-areas. Porcelain stone, weathered rock of quartz, mica, and feldspar composition were found to be the raw material for the body and important components in the glaze and white inlay. The close similarity between glaze and black inlay in the microstructure suggests that the glaze material was modified by adding clay with high iron content, such as biotite, for use as black inlay. The deep soft translucent quality of celadon glaze is brought about by its microstructure of bubbles, remnant and devitrified minerals, and the schlieren effect.

• Journal of the Korean Ceramic Society
• /
• v.13 no.2
• /
• pp.17-23
• /
• 1976

The study is an attempt to prepare the raw graze can replace the lead glaze that has been used for a long time as Korean Kimchi-jars. 1) The batch of the glaze that show the similar properties and appearance of lead-glaze were 40% of Yongin or Anseong Yakto, 40% of Ash and 20% of Anhydrous-Colemanite. It's Seger Formula was {0.86 CaO 0.02 MgO 0.12 KNaO} {0.26 Al2O3 0.0007 Fe2O3} 0.92 SiO2 0.3 B2O3 2) The firing temperature of selected glaze was 950-1050℃. 3) As the content of anhydrous-Colemanite was increased, the thermal expansion coefficient was decreased. 4) The color of leadless raw glaze was translucent light yellow. It was possible to obtain the same color as lead glaze by Fe2O3 and MnO2.