• The Journal of Korea Robotics Society
• /
• v.10 no.2
• /
• pp.119-132
• /
• 2015

Two novel parallel mechanisms (PMs) employing two or three PaPaRR subchains are suggested. Each of those two PMs has translational 3-DOF motion and employs only revolute joints such that they could be adequate for haptic devices requiring minimal frictions. The position analyses of those two PMs are conducted. The mobility analysis, the kinematic modeling, and singularity analysis of each of two PMs are performed employing the screw theory. Then through optimal kinematic design, each of two PMs has excellent kinematic characteristics as well as useful workspace size adequate for haptic applications. In particular, by applying an additional redundantly actuated joint to the 2-PaPaRR type PM which has a closed-form position solution, it is shown that all of its parallel singularities within reachable workspace are completely removed and that its kinematic characteristics are improved.

• Structural Engineering and Mechanics
• /
• v.45 no.4
• /
• pp.423-437
• /
• 2013

Complex structures are usually assembled from several substructures with joints connecting them together. These joints have significant effects on the dynamic behavior of the assembled structure and must be accurately modeled. In structural analysis, these joints are often simplified by assuming ideal boundary conditions. However, the dynamic behavior predicted on the basis of the simplified model may have significant errors. This has prompted the researchers to include the effect of joint stiffness in the structural model and to estimate the stiffness parameters using inverse dynamics. In the present work, structural joints have been modeled as a pair of translational and rotational springs and frequency equation of the overall system has been developed using sub-structure synthesis. It is shown that using first few natural frequencies of the system, one can obtain a set of over-determined system of equations involving the unknown stiffness parameters. Method of multi-linear regression is then applied to obtain the best estimate of the unknown stiffness parameters. The estimation procedure has been developed for a two parameter joint stiffness matrix.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2699-2703
• /
• 2012

The functional significance of the proteasome activator $REG{\gamma}$ in the regulation of cell proliferation and apoptosis has been recognized. However, pathological contributions to tumor development remain to be elucidated. Both oncogenic proteins and tumor suppressors are targeted by $REG{\gamma}$ for proteasomal degradation. It has been proposed that the role of the $REG{\gamma}$ in the pathogenesis of cancer is cell- and context-specific. In this study, we aimed to explore the potential involvement of $REG{\gamma}$ in laryngeal carcinomas, comparing protein expression in tumor and adjacent tissues by immunohistochemical staining and Western blot analysis. We also characterized the correlation between the expression of $REG{\gamma}$ and the previously identified substrates p53 and p21. We showed that $REG{\gamma}$ was abnormally highly expressed in cancer tissues. Statistical analysis revealed that there was a positive relationship between the level of $REG{\gamma}$ and the expression of p53 and p21. Our study suggests that $REG{\gamma}$ overexpression can facilitate the growth of laryngeal cancer cells.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.3
• /
• pp.243-248
• /
• 2002

In this paper, mobility of planar mobile robots is discussed. Firstly, simplified joint models for four typical wheels of the mobile robots are described including both rotational and translational friction parameters. Then, based on these joint models and through the inclusion of the additional imaginary joint particularly to the mobile robots which lack geometric generality, mobility analysis of various types of planar mobile robots is performed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.223-235
• /
• 1993

VTR(Video Tape Recorder) has very complicated mechanisms composed of various cams, links, gears and so on. To satisfy kinematic requirements of VTR components, various geometric constraints between rigid bodies and a translational cam design program are developed. Mechanisms of VTR are divided into functional groups like a control part, a loading part and a tape guide part. Each group is modeled for kinematic and dynamic analysis. Finally, all groups are combined together for a complete VTR model and loads required for each function of VTR controls are studied. Detailed description of developed programs are presented and result are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.661-666
• /
• 2000

Optimization of the elastic joint of train is performed according to the minimization of ten responses which represent driving safety and ride comfort of train and analyzed by using the each response se surface model from stochastic design of experiments. After the each response surface model is constructed, the main effect and sensitivity analyses are successfully performed by 2nd order approximated regression model as described in this paper. We can get the optimal solutions using by nonlinear programming method such as simplex or interval optimization algorithms. The response surface models and the optimization algorithms are used together to obtain the optimal design of the elastic joint of train. the ten 2nd order polynomial response surface models of the three translational stiffness of the elastic joint (design factors) are constructed by using CCD(Central Composite Design) and the multi-objective optimization is also performed by applying min-max and distance minimization techniques of relative target deviation.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.63-68
• /
• 2000

This paper describes the conceptual design of new robot hand by type synthesis. The conventional robot hands with rotational movement have bad controllability because the distance between the final rotational joint and the center of things grasped is changed according to the size of things grasped. This paper uses the systematic procedure of type synthesis and the knowledge for designing robot hands. The new 6-bar Watt I type conceptual robot hand with rectilinear translational movement is proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.411-420
• /
• 2000

This paper presents a new method for calculating contact position and contact force. The proposed method calculates accurate contact position by introducing intermediate parameters. Accurate contac t force can be obtained by solving reduced equations of motion iteratively. This method can be applied to calculate not only contact force on contact points but also contact force on kinematic joints such as a rotational joint and a translational joint. Four numerical examples are given to demonstrate the effectiveness of the proposed algorithm.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.301-307
• /
• 2004

An inverse dynamic model of lower limbs is presented to calculate joint moments during gait. The model is composed of 4 segments with 3 translational joints and 12 revolute joints. The inverse dynamic method is based on Newton-Euler formalism. Kinematic data are obtained from 3 dimensional trajectories of markers collected by a motion analysis system. External forces applied on the foot are measured synchronously using force plate. The use of developed model makes it possible to calculate joint moments for variation of parameters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.605-610
• /
• 1994

Optimal design of fault-tolerant, spatial type maniplators is treated in this paper. Design objective is to guarantte three degree-of-freedom translational motions in the task space, upon failure of one arbitrary joint of 4 degree-of -freedom manipulators. Realizing the nonfault-tolerant characteristics of current, wrist-type industrial manipulators, several 4 degree-of-freedom redundant structures with one joint redundancy are suggested as the fault-tolerant spatial -type manipulators. Fault-tolerant charactersitics are investigated basedon the analysis of the self-motion and the null-space elements, of a redundant manipulator. Finally, in order to maximize the fault-tolerant capability,optimal design is performed for a spatial-type manipulator with respect to the global isotropic index, and the performance enhancement of the optimized case is shown by simulation.