• English Language & Literature Teaching
• /
• v.13 no.1
• /
• pp.111-131
• /
• 2007

This study explores teacher's corrective feedback types in an error treatment sequence in Korean EFL classroom setting. Corrective feedback moves are coded as explicit correction, recast, or initiations to self-repair. The frequency and distribution of each corrective feedback type are examined. But the special focus was given on feedback types eliciting learner's self-repair (clarification request, metalinguistic feedback, elicitation, and repetition of error) because initiations to self-repair are believed to facilitate language learning more than other strategies. The results of the study are as follows. First, there was an overwhelming tendency for teacher to use recasts whereas initiations to self-repair were not used as much as recast (52.4% vs. 29.5%). Second, the teacher tended to select feedback types in accordance with error types: namely, recasts after phonological, lexical, and translation errors and initiations to self-repair after grammatical errors though the differences were not significant. Finally, teacher's belief and students' expectation on corrective feedback were compared with actual corrective feedback representations respectively and some mismatches were found. Though both teacher and the students acknowledged the importance and necessity of self-repair, self-repair were not put into practice as such. Therefore, this study suggests more initiations to self-repair be used for effective language learning.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.932-935
• /
• 2002

In this paper, we introduce new FTL(Flash Translation Layer) driver algorithm that tolerate the power off errors. FTL driver is the software that provide the block device interface to the upper layer software such as file systems or application programs that using the flash memory as a block device interfaced storage. Usually, the flash memory is used as the storage devices of the mobile system due to its low power consumption and small form factor. In mobile system, the state of the power supplement is not stable, because it using the small sized battery that has limited capacity. So, a sudden power off failure can be occurred when we read or write the data on the flash memory. During the write operation, power off failure may introduce the incomplete write operation. Incomplete write operation denotes the inconsistency of the data in flash memory. To provide the stable storage facility with flash memory in mobile system, FTL should provide the fault tolerance against the power off failure. SSR (Simple Sector Remapper) is a fault tolerant FTL driver that provides block device interface and also provides tolerance against power off errors.

• Genomics & Informatics
• /
• v.14 no.1
• /
• pp.34-40
• /
• 2016

Due to advances in omics technologies, numerous genome-wide studies on human samples have been published, and most of the omics data with the associated clinical information are available in public repositories, such as Gene Expression Omnibus and ArrayExpress. While analyzing several public datasets, we observed that errors in gender information occur quite often in public datasets. When we analyzed the gender description and the methylation patterns of gender-specific probes (glucose-6-phosphate dehydrogenase [G6PD], ephrin-B1 [EFNB1], and testis specific protein, Y-linked 2 [TSPY2]) in 5,611 samples produced using Infinium 450K HumanMethylation arrays, we found that 19 samples from 7 datasets were erroneously described. We also analyzed 1,819 samples produced using the Affymetrix U133Plus2 array using several gender-specific genes (X (inactive)-specific transcript [XIST], eukaryotic translation initiation factor 1A, Y-linked [EIF1AY], and DEAD [Asp-Glu-Ala-Asp] box polypeptide 3, Y-linked [DDDX3Y]) and found that 40 samples from 3 datasets were erroneously described. We suggest that the users of public datasets should not expect that the data are error-free and, whenever possible, that they should check the consistency of the data.

• Journal of Mechanical Science and Technology
• /
• v.19 no.10
• /
• pp.1919-1931
• /
• 2005

Human joint motion can be kinematically described in three planes, typically the frontal, sagittal, and transverse, and related to experimentally measured data. The selection of reference systems is a prerequisite for accurate kinematic analysis and resulting development of the equations of motion. Moreover, the development of analysis techniques for the minimization of errors, due to skin movement or body deformation, during experiments involving human locomotion is a critically important step, without which accurate results in this type of experiment are an impossibility. The traditional kinematic analysis method is the Angular-based method (ABM), which utilizes the Euler angle or the Bryant angle. However, this analysis method tends to increase cumulative errors due to skin movement. Therefore, the objective of this study was to propose a new kinematic analysis method, Position-based method (PBM), which directly applies position displacement data to represent locomotion. The PBM presented here was designed to minimize cumulative errors via considerations of angle changes and translational motion between markers occurring due to skin movements. In order to verify the efficacy and accuracy of the developed PBM, the mean value of joint dislocation at the knee during one gait cycle and the pattern of three dimensional translation motion of the tibiofemoral joint at the knee, in both flexion and extension, were accessed via ABM and via new method, PBM, with a Local Reference system (LRS) and Segmental Reference system (SRS), and then the data were compared between the two techniques. Our results indicate that the proposed PBM resulted in improved accuracy in terms of motion analysis, as compared to ABM, with the LRS and SRS.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.3 no.2
• /
• pp.129-133
• /
• 2017

Since carbon-fluorine (C-F) bonds play a key role to improve bioavailability and lipophilicity, they have found commonly in pharmaceuticals, radiopharmaceuticals, agrochemicals, and material science. Advances on the efficient method to introduce fluorine to complex organic molecules are mainly results of development of fluorination reagents and transition metal catalysts. In this mini-review, we want to emphasize two representative nucleophilic fluorinating reagents regarding carbon-fluorine bond formation, which were developed in the mid-2000s.

• Journal of Information Processing Systems
• /
• v.13 no.2
• /
• pp.268-284
• /
• 2017

The dorsal hand vein biometric system developed has a main objective and specific targets; to get an electronic signature using a secure signature device. In this paper, we present our signature device with its different aims; respectively: The extraction of the dorsal veins from the images that were acquired through an infrared device. For each identification, we need the representation of the veins in the form of shape descriptors, which are invariant to translation, rotation and scaling; this extracted descriptor vector is the input of the matching step. The optimization decision system settings match the choice of threshold that allows accepting/rejecting a person, and selection of the most relevant descriptors, to minimize both FAR and FRR errors. The final decision for identification based descriptors selected by the PSO hybrid binary give a FAR =0% and FRR=0% as results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.965-969
• /
• 1995

This paper deals with effective using the IGES file for flexible data exchange among the other CAD/CAM system. If a data exchange between STL file and the neutral IGES file in Stereolithography system is available, a product design becomes more flexible. THere can be many restrictions and difficulties intranslating these data. First, an STL file follows two rules, such as right-hand rule, and vertex-to-vertex rule, thus requires a structural verification. Second, translation should be performed with minmal errors. It becomes very important to translate IGES file of limited kinds of entities fot the purpose of geometric information into STL file with minor data manipulation. The developed system suggests a good approach of translating the sampled B-spline surface of IGES and shows a potential linkage between IGES and STL format file.

• Journal of Power System Engineering
• /
• v.12 no.4
• /
• pp.18-25
• /
• 2008

This paper investigated the new calibration algorithm of a straight-type five-hole pressure probe necessary for calculating three-dimensional flow velocity components. The new data reduction method Includes a look-up, a geometry transformation such as the translation and reflection of nodes, and a binary search algorithm. This new calibration map was applied up to the application angle, ${\pm}55^{\circ}$ of a probe. As a result, this data reduction method showed a perfect performance without any kind of interpolation errors In calculating yaw and pitch angle from the calibration map.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.415-419
• /
• 2000

Multi-degree-of-freedom (MDOF) displacement measurement Is needed In many application fields: precision machine control, precision assembly, vibration analysis, and so on. This paper presents a new MDOF displacement measurement method using a laser diode (LD), two position-sensitive detectors (PSDs), and a conventional diffraction grating. It utilizes typical features of a diffraction grating to obtain the information of MDOF displacement. MDOF displacement is calculated from the independent coordinate values of the diffracted ray spots on the PSDs. Forward and inverse kinematic problems were solved to compute the MDOF displacement of a rigid body. Experimental results show maximum absolute errors of less than ${\pm}10$ micrometers in translation and ${\pm}30$ arcsecs in rotation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.913-918
• /
• 2006

Patients of dyslexia have an reading disorder marked by the occurrence of semantic errors. Because there is little understanding of dyslexia in korea, we use a translation version of foreign tester for testing the patients of dyslexia. However, the foreign testers is not suitable for testing the korean patients, because language is sensitive to national culture and trait. In this paper, we propose a model of tester for dyslexia Which is used for classification and analysis of korean patients. In addition, we show some characteristics of the implemented tester by a performance study.