• Korean Journal of Hydrosciences
• /
• 제7권
• /
• pp.1-8
• /
• 1996

The location and the shape of a freshwater transition zone in a coastal aquifer are affected by many hydraulic variables. To data most works to determine the effects of these variables are limited to qualitative comparison of transiton zones. In this work characteristics of transition zones are analyzed quantitatively. The investigation is limited to a steady-state transition zones. Three dimensionless variables are defined to represent characteristics of steady-state transition zones. They are maximum introsion length, thickness, and degree of stratification. Effects of principal hydraulic variables (velocity and dispersivity) on these characteristics are studied using a numerical model. Dimensional analysis is used to systematically analyze entire model results. Effects of velocity and dispersivity are seem clearly. From this study, increase in velocity is found to cause shrinkage of transition zones. This observation contradicts claims by some that, because dispersion is proportional to velocity, increase in velocity would cause expansion of transition zones.

• 물과 미래
• /
• 제28권2호
• /
• pp.137-143
• /
• 1995

해안 대수층 내에서 담수와 해수 사이에 형성되는 확산대의 위치와 형태는 많은 변수들에 의하여 영향을 받는다. 현재까지 수행된 많은 연구는 확산대들의 정성적 비교로 국한되었다. 본 연구에서는 정량적 분석을 위하여 확산대 특성(최대 침투 길이, 두께, 성층 정도)을 계량화하고 수치 모형을 이용하여 주요 변수(유속과 확산지수)가 확산대 특성에 미치는 영향을 고찰하였다. 차원해석을 통하여 정리된 실험 결과는 유속과 확산지수가 확산대의 특성에 미치는 영향을 명확히 규명하였다. 유속의 증가는 확산계수를 증가시키기 때문에 확산대가 팽창한다는 일부의 주장과는 달리 확산대는 축소하는 것으로 밝혀졌다.

• 한국철도학회논문집
• /
• 제19권5호
• /
• pp.647-655
• /
• 2016

고속철도 건설의 증가와 기존선 개량사업 등은 철도의 직선화를 필요로 하며, 이는 터널과 교량 건설의 증가로 이어지고 있다. 철도에서 접속부는 궤도지지강성이 변화하는 구간으로 열차운행의 안정 및 잦은 궤도틀림 발생 등으로 특별히 주의를 요하는 구간이 된다. 가장 대표적인 접속부 구간은 터널과 토공의 접속부와 교량과 토공의 접속부를 들 수 있다. 그 중 교량과 토공의 접속부는 여러 가지 요인에 의하여 많은 문제를 안고 있는 실정이다. 본 논문에서는 철도에서 교량과 토공의 접속부가 안고 있는 근본적인 문제를 분석하였다. 이를 통하여 철도 교량과 토공의 접속부에 대한 이해도를 높이고 지속적으로 발생하고 있는 이 구간에서의 문제를 해결하는 방안을 제시하고자 한다.

• 한국환경복원기술학회지
• /
• 제22권6호
• /
• pp.77-87
• /
• 2019

The first grade zones in Ecology and Nature Map are important regions for the conservation of the ecosystem, but it would be degraded by various anthropogenic factors. This study analyzes the relationship between potential land cover change and degradation of the first grade zones using land cover transition probability. As a result, it was shown that most of the first grade zones with degraded were converted from forest to urban(5.1%), cropland(27.2%), barren(11.0%) and grass(27.5%) in Gangwon and forest to urban(18.0%), cropland(15.3%), grass(28.4%), barren(12.3%) in Gyeonggi. The result of the logistic regression analysis showed that the probability of degradation of first grade zone was higher in area where was expected the higher probability of urban, cropland, barren, grass transition. The barren transition probability was the most influential and grass was the next highest. There were regional differences in the probability of urban transition and cropland transition, and the urban transition probability was more influential in Gyeonggi-do. This is because development pressure such as housing site development is high in Gyeonggi-do. Due to the limitations of the Act on Mountain Districts Management, even in the first grade zones, the grade may be degraded. Therefore, if Ecology and Nature Map are used to prevent deforestation or conversion of mountainous districts, it may contribute to the preservation of the ecosystem.

• Computers and Concrete
• /
• 제12권1호
• /
• pp.1-18
• /
• 2013

This paper presents an actual microstructure-based numerical method to investigate the mechanical properties of concrete at mesoscopic level. Digital image processing technique is used to capture the concrete surface image and generate the actual 3-phase microstructure of the concrete, which consists of aggregate, matrix and interfacial transition zones. The microstructure so generated is then transformed into a mesh or grid for numerical analysis. A finite difference code FLAC2D is used for the numerical analysis to simulate the mechanical responses and failure patterns of the concrete. Several cases of concrete with different degrees of material heterogeneity and under different compression loading conditions have been analysed. From the numerical results, the effects of the internal material heterogeneities as well as the external confining stresses are studied. It is shown that the material heterogeneities arising from the presence of different phases and the existence of interfacial transition zones have great influence on the overall mechanical behaviour of concrete and that the numerically simulated behaviour of concrete with or without confining stresses applied agrees quite well with the general observations reported in the literature.

• 한국지역지리학회지
• /
• 제23권2호
• /
• pp.288-310
• /
• 2017

이 글은 동아시아의 특구가 지니는 정치-경제-사회적 의미를 국가 영토성과의 관련 속에서 이론적으로 검토하는 것을 목적으로 한다. 이를 위해 특구를 신자유주의적 통치성이 발현되는 예외적 공간이라 개념화한 아이와 옹의 논의를 소개하고 비판적으로 검토할 것이다. 옹과 달리 특구를 단지 신자유주의적 변화의 결과인 것으로만 이해하지 않고, 특구라는 현상을 근대국가의 영토성이 지닌 내적 한계와 연결시켜 설명할 것이다. 특히, 특구를 근대적 국민국가의 영토성에 내재된 이동성과 고착성 사이의 모순적 경향이 변증법적으로 발현된 것으로 바라본다. 또한, 동아시아 자본주의 발달의 시공간적 맥락 속에서 보았을 때 특구는 동아시아 발전주의 국가의 공간성에 내재된 기본적 속성 중의 하나임을 주장한다. 이러한 논의를 바탕으로 지난 1960년대 이래로 동아시아 발전주의 국가의 맥락에서 시도된 다양한 특구 전략을 1) 발전주의 특구, 2) 신자유주의 특구, 3) 체제전환형 특구라는 3개의 유형으로 나누고, 그 특징에 대해 논의할 것이다.

• 한국농공학회논문집
• /
• 제60권4호
• /
• pp.27-35
• /
• 2018

Food consumption pattern changes, including a decrease in rice consumption and increasing demand for fresh vegetables, along with declining food self-sufficiency rate, more importance is being placed on agricultural industry within Korea. Taking these changes into consideration, there is an increasing necessity for managing upland fields on agricultural sector to revitalize agricultural land use. Therefore, in this study, upland use type was classified into agricultural economic, environmental conservation, and rural social frames. The purpose of this study was to suggest upland use plan with farm manager registration information and spatial data. As results of this analysis, the mean area of agricultural economic frame in Haenam (16.47 ha) was found to be wider than Muan (3.17 ha), and scale improvement zones (54 zones) were located in only Haenam. In case of environmental conservation frame, there's no zone of scenic agriculture land in both study areas, but landuse transition zones were located in Muan (278 zones) and Haenam (604 zones). Agro-healing zones of rural social frame were 1,018 zones in Muan and 1,588 zones in Haenam and kitchen garden sites were 342 zones in Muan and 370 zones in Haenam. These results could be used when we establish the plan of an agricultural infrastructure project or select places for a collaborative agricultural land use project.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.119-127
• /
• 2003

For the calculation of internal stability, the hypothesis in conventional design is on the basis of two distinct zones, which are‘active zone’and‘passive zone’. This means that there is an abrupt discontinuous transition from active to passive states across a potential failure line. The existence of a discontinuity of this nature appears physically unreasonable, especially from kinematic considerations. A series of pull-out model tests was undertaken from a wall being rotated about the toe to find the strain distribution mobilized from near the wall face into the deep, stable zone through the centre plane. With this finding of transition zone, the objective of study is aiming at identifying the likely effect of this zone in designing method by comparing with the prevailing design method.

• 한국주조공학회지
• /
• 제20권3호
• /
• pp.197-207
• /
• 2000

Al-Si alloys were solidified in a rotating cylindrical mold by a vertical centrifugal casting process. Under a certain casting condition, there are four distinct zones such as the chill zone, the primary fine columnar zone, the equiaxed zone, and the secondary coarse columnar zone from the mold wall. The columnar-equiaxed transition (CET) and the equiaxed-columnar transition (ECT) were measured as functions of solute content, flow rate (mold velocity), pouring temperature and mold temperature. Within the critical value of solute content, as the flow rate increases, the columnar-equiaxed transition were found, but not the equiaxed-columnar transition. The aspect ratio of the primary columnar zone was more affected by the solute content than the flow rate. However the aspect ratio of the equiaxed zone was more affected by the flow rate than the solute content. The aspect ratio of the secondary columnar zone was affected by both the flow rate and the solute content.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1593-1601
• /
• 2021

Oxide dispersion strengthening (ODS) tungsten alloys are highly desirable in irradiation applications. However, how to improve the properties of ODS-tungsten alloys efficiently has been worth studying for a long time. Here we report a nanostructuring approach that achieves W-La₂O₃ alloy with a high level of flexural strength and Vickers hardness at room temperature, which have the maximum value of 581 MPa and 703 Hv, respectively. This method named solution combustion synthesis (SCS) can generate 30 nm coating structures W-La₂O₃ composite powders by using Keggin-type structural polyoxometalates as raw materials in a fast and low-cost process. The composite powder can be fabricated to W-La₂O₃ alloy with an optimal microstructure of submicrometric W grains coexisting with nanometric oxide particles in the grain interior, and a stability interface structure of grain boundaries (GBs) by forming transition zones. The method can be used to prepare new ODS alloys with excellent properties in the future.