• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.294-297
• /
• 2004

RTP(Rapid Thermal Pressing) is to fabricate desired pattern on polymer substrate by pressing patterned mold against the substrate heated around glass transition temperature. For a successful RTP process, the whole process including heating, molding, cooling and demolding should be conducted 'rapidly' as possible. As the RTP process is effective in replicating patterns on flat large surface without causing shape distortion after cooling, it is being widely used for fabricating various micro/bio application components, especially with channel-type microstructures on surface. This investigation finally aims to develop a RTP process machine for mass-producing micro/bio application components. As a first step for that purpose, we intended to examine the technological difficulties for realizing mass production by RTP process. Therefore, in the current paper, 4 kinds of RTP machines were examined and then the RTP process was conducted experimentally for PMMA film by using one of the machines, HEX 03. The micro-patterned molds used for RTP experiment was fabricated from silicon wafer by semi-conduct process. The replicated micro patterns on PMMA films were examined using SEM and the causes of defect observed in the replicated patterns were discussed.

• 기술혁신연구
• /
• 제22권3호
• /
• pp.193-223
• /
• 2014

최근 환경문제에 대한 구조적인 해결책을 찾는 과정에서 사회-기술 시스템이 하나의 핵심적인 분석단위가 되고 있다. 또한 지속가능성이라는 복잡한 도전과제에 대응하기 위해 전환이론에 관한 연구도 활발히 이루어지고 있다. 본 논문은 이와 같은 지속가능한 사회-기술 전환을 거버닝하기 위해 어떻게 접근할 수 있는지의 문제를 정부의 관점에서 다루고 있다. 보다 구체적으로, 전환이론과 거버넌스 이론을 접목하여 사회-기술 전환을 위한 정책 거버넌스를 유형화함으로써, 전환목표 달성을 위한 정부의 역할모델과 전환정책 설계를 위한 실천적 프레임워크를 제시하는 것을 목적으로 한다. 이를 위해 사회적 조정수준과 전환압력이 발생하는 위치를 전환정책 거버넌스를 유형화화기 위한 핵심 맥락으로 설정하고, 주도적 정책 거버넌스, 촉진적 정책 거버넌스, 조정적 정책 거버넌스, 설득적 정책 거버넌스 등 4가지 거버넌스 유형을 도출하여 각각의 특징과 사례를 논의하였다. 이와 같은 접근은 분석적 측면에서 각 유형별로 전환을 촉진하는 정책기능의 차이를 비교할 수 있는 가이드라인을 제공하는 한편, 규범적 측면에서는 정책입안자가 어떻게 효과적인 전환정책을 설계할 수 있을 것인지에 대한 판단기준을 제공하는데 기여할 수 있다. 또한 이론적 측면에서는 혁신정책 관점의 전환이론을 기존의 거버넌스 이론과 접목함으로써, 양 연구의 간극을 줄이고 전환에 대한 거버넌스적 고찰을 구체적인 전환이론과 연계하는데 기여할 수 있다.

• 한국결정성장학회지
• /
• 제7권1호
• /
• pp.108-116
• /
• 1997

초크랄스키 대류에서의 동적 천이과정에 대한 실험 및 수치해석 연구가 수행되었다. 결정의 회전에 의한 강제대류와 결정/용융 경계면과 도가니 외벽간의 온도차에 의한 자연대류의 상호작용에 의해서 결정되어지는 유동구조와 천이현상을 해석하기 위해 도가니 내의 온도진동 특성을 시간주기($t_p$)와 진동크기($Delta\theta$)에 의해 검토하였다. 혼합대류인자에 따른 천이현상의 체계적인 연구가 수행되었으며($0.134\le Ra/PrRe^2 \le3.804$), 천이현상에 대한 Pr수의 영향을 조사하였다. 천이 메카니즘을 이해하기 위해, 자오면상의 온도장과 중심축에서의 축방향 속도에 대한 해석이 부가되었다.

• 분석과학
• /
• 제9권4호
• /
• pp.406-410
• /
• 1996

The adsorption behaviors of transition metal ions on the poly(N,N'-bispalmitoyl-1, 12-diaza-3, 4;9,10-dibenzo-5,8-cyclopentadecane) has been determined by adsorption process in aqueous solution. The order of concentration factor(CF) and the amount of adsorption were Cu(II)

• 한국항해항만학회지
• /
• 제28권7호
• /
• pp.587-591
• /
• 2004

In order to measure the performance of resources in a port container terminal, we conducted a state transition network simulation to model various equipment processes. The processes that container cranes and transfer cranes perform are idle, wait, move, and work. Vehicles perform idle, wait, empty travel, and full travel. Because cranes, vehicles, and vessels are movable entities and all equipment is classified as either a customer or server, we separated the various stages of the process based upon the state transition network To validate the simulation results, a real system was used to illustrate the use of various measurements using the state transition network.

• 한국전산유체공학회지
• /
• 제6권4호
• /
• pp.15-25
• /
• 2001

Numerical prediction of the diffusion controlled transition in a turbine gas pass is important because it can change the local heat transfer rate over a turbine blade as much as three times. In this study, the gas flow over turbine blade is simplified to the flat plate boundary layer, and an adaptive grid scheme redistributing grid points within the computation domain is proposed with a great emphasis on the construction of the grid control function. The function is sensitized to the second invariant of the mean strain tensor, its spatial gradient, and the interaction of pressure gradient and flow deformation. The transition process is assumed to be described with a κ-ε turbulence model. An elliptic solver is employed to integrate governing equations. Numerical results show that the proposed adaptive grid scheme is very effective in obtaining grid independent numerical solution with a very low grid number. It is expected that present scheme is helpful in predicting actual flow within a turbine to improve computation efficiency.

• 한국소음진동공학회논문집
• /
• 제12권4호
• /
• pp.280-286
• /
• 2002

It has been long suspected that the transition region may give rise to local pressure fluctuations and radiated sound that are different from those created by the fully-developed turbulent boundary layer at equivalent Reynolds number. Experimental investigation described in this paper concerns the characteristics of pressure fluctuations at the transition. Flush-mounted microphones and hot wires are used to measure the pressure fluctuations and local flow velocities within the boundary layer in the low noise wind tunnel. From this experiment we could observe the spatial and temporal development process of T-S wave using Wigner-Ville method and find the relations between the characteristic frequency of T-S wave and free stream velocity and the boundary layer thickness based on nondimensional pressure spectra scaled on outer variables.

• 한국인쇄학회지
• /
• 제14권1호
• /
• pp.17-29
• /
• 1996

N-substituted acrylamide hydrogel is reported to have the feature of bing transparent and sensitive enough to response to a temperature stimulus below the temperature of phase transition. Especially at the near of 35 C it becomes shrunk and opaque very quickly. It has also the characteristic of reversing swelling and shrinking. The experiment showed that it is possible to produce a functional gel of super water absorption with the process of free radical polymerizing PVA(polyvinylalcohol) and PAA(polyacrylamide), and crosslinking. The ratio of shrinking and swelling caused by copolymerization rises 10% to 80% at the each temperature of 20 C, 30 C, 40 C, respectively. Phase transition temperature of this gel by copolymerization is50 C while that of ordinary N-substituted acrylamides is between 32~35 C. This temperature reaches the rearing limit of animals and plants so that volumetric transition polymer gel can be ulilized in varying fields such as agriculture/gardening which are water-using field, on-off switch sensing temperature and volumetric variation, processing of liquid wastes and civil engineering works, architecture and electronics. We have no doubt that this material will be the high-functional resin in the hi-tech age of the near future.

• 한국세라믹학회지
• /
• 제54권1호
• /
• pp.1-8
• /
• 2017

Electrochemical water splitting to produce hydrogen energy is regarded as a promising energy conversion process for its environmentally friendly nature. To improve cell efficiency, the development of efficient water oxidation catalysts is essentially demanded. For several decades, 3d transition metal oxides have been intensively investigated for their high activity, good durability and low-cost. This review covers i) recent progress on 3d transition metal oxide electrocatalysts and ii) the reaction mechanism of oxygen evolving catalysis, specifically focused on the proposed pathways for the O-O bond formation step.

• BMB Reports
• /
• 제43권6호
• /
• pp.389-399
• /
• 2010

Fertilization is a complex process comprised of numerous steps. During fertilization, two highly specialized and differentiated cells (sperm and egg) fuse and subsequently trigger the development of an embryo from a quiescent, arrested oocyte. Molecular interactions between the sperm and egg are necessary for regulating the developmental potential of an oocyte, and precise coordination and regulation of gene expression and protein function are critical for proper embryonic development. The nematode Caenorhabditis elegans has emerged as a valuable model system for identifying genes involved in fertilization and the oocyte-to-embryo transition as well as for understanding the molecular mechanisms that govern these processes. In this review, we will address current knowledge of the molecular underpinnings of gamete interactions during fertilization and the oocyte-to-embryo transition in C. elegans. We will also compare our knowledge of these processes in C. elegans to what is known about similar processes in mammalian, specifically mouse, model systems.