• 제목/요약/키워드: Transition phase

검색결과 1,991건 처리시간 0.031초

진공튜브 속에서 분해하는 리튬암모니아 솔루션의 열전효율 향상 (Thermoelectric Efficiency Improvement in Vacuum Tubes of Decomposing Liquid Lithium-Ammonia Solutions)

  • 이정윤;김미애;심규철;김지범;전준현
    • Korean Chemical Engineering Research
    • /
    • 제51권3호
    • /
    • pp.358-363
    • /
    • 2013
  • 순수한 리튬-암모니아(Li-$NH_3$) 솔루션의 생성은 진공 상태에서 가능하지만, 고효율 열전전력을 얻기 위한 안정적이고 신뢰성 있는 분해에 대한 문제가 아직 남아있다. 본 논문은 Li-$NH_3$ 솔루션의 열전변환 효율을 향상시키기 위한 새로운 방법을 다루었다. 제안된 방법은 Li-$NH_3$ 솔루션의 합성과 분해를 위해 'U' 형태의 파이렉스 진공 튜브를 사용하였다. 튜브 상부에는 기존 'U' 형태의 파이렉스 진공 튜브의 두 다리를 연결하는 기체의 이동통로가 있는데, 이는 고온부(Hot side)에서 분해가 진행될 때 $NH_3$ 기화에 따른 양단의 내부압력 불균형을 방지하는 역할을 한다. 열전 실험결과, 'U' 형태 튜브 속에서 솔루션 반응은 기존 'U' 형태에 비해 매우 안정적이고 효율적으로 이루어졌으며, 결과적으로 열전변환 효율이 향상됨을 보였다. 또한, 제안 방식은 장시간에 걸친 고효율 열전 발전을 위해 튜브 속에서 합성과 분해가 순환되는 가역반응을 제공함이 입증되었다.

기술과 교육에서 TRIZ(창의적 문제해결 이론)의 적용 방안 탐색 (Exploring Strategies for Applying TRIZ to Technology Education)

  • 문대영
    • 대한공업교육학회지
    • /
    • 제31권2호
    • /
    • pp.155-176
    • /
    • 2006
  • 이 연구는 기술과 교육에서 TRIZ의 도입 가능성과 적용 방안을 찾기 위해 수행되었다. TRIZ가 갖는 강력한 잠재력을 과연 초 중등 기술과 교육에 도입할 수 있는지, 어떻게 적용할 수 있는지에 대한 총체적인 탐색을 통해 기술과 교육에서 추구하는 기술적 창의력과 기술적 문제 해결력을 학교 현장에 구체적으로 구현하기 위한 이론적 근거를 제시하고자 하였다. 연구의 목적을 달성하기 위해서 Contradiction, 40 Principles, 76 Standard solutions, Multi screen method, Effects, The law of technology evolution, ARIZ 등의 TRIZ 개념과 핵심 원리를 파악하였다. 또한, 이를 바탕으로 하여 초 중등 기술과 교육에서 TRIZ의 도입 가능성과 적용 방안을 탐색하고, 타당성을 검토하였다. 이 연구에서는 초 중등 기술과 교육에서 모순, 40가지 원리, 76가지 표준해, 다차원 분석, 자연 효과, 기술 진화 법칙, ARIZ 등과 같은 TRIZ의 기본 개념을 어떻게 적용할 수 있을까에 대한 방안을 각각 제시하고 이들에 대하여 타당성 검토를 실시하였으며, 그 결과 '40가지 원리'만 초 중등 기술 교육에 적용하기에 적합한 것으로 판정되었다. 또한, 40가지 원리 중에서 초등 기술 교육에서는 분할 나누기, 추출 제거, 국부적 특성, 비대칭, 병합 동시 수행, 다용도 범용성, 균형 유지, 반대 조치, 매개체 사용, 자체 해결, 값 싼 물체로 대체 일회용, 유연하고 얇은 막 사용, 색상 변화, 동질성, 폐기와 재생, 복합 재료 등과 같은 15가지 원리가 적합하며, 중등 기술 교육에서는 분할 나누기, 추출 제거, 국부적 특성, 비대칭, 병합 동시 수행, 다용도 범용성, 균형 유지, 사전 반대 조치, 사전 조치, 사전 예방, 반대 조치, 자유도 증가, 조금 덜 또는 조금 더, 유용한 조치의 지속, 해로운 것을 이로운 것으로 전환, 매개체 사용, 자체 해결, 값 싼 물체로 대체 일회용), 유연하고 얇은 막 사용, 색상 변화, 동질성, 폐기와 재생, 특성 변화, 상태 전이, 열팽창, 복합 재료 등과 같은 26가지 원리가 적합함을 확인할 수 있었다.

열가소성 폴리우레탄으로 개질된 폴리카보네이트에서 TPU의 열분해 (Thermal Degradation of Thermoplastic Polyurethane Modified with Polycarbonate)

  • 권회진;차윤종;최순자
    • 폴리머
    • /
    • 제24권3호
    • /
    • pp.314-325
    • /
    • 2000
  • 경질 사슬(HS) 함량이 각각 35.5 (TPU-35)와 53.4 wt% (TPU-53)인 열가소성 폴리우레탄(TPU)으로 개질된 폴리카보네이트(PC)의 열분해 특성을 DSC, GPC 및 FT-IR로 연구하였다. 경질 사슬 함량이 큰 TPU의 T$_{g}$가 높게 나타났으며, PC/TPU 블렌드에서 HS 함량에 관계없이 열처리 온도와 TPU 함량이 증가함에 따라 PC의 T$_{g}$가 감소하였다. 이는 열처리에 따른 열가소성 TPU물질의 열분해 현상에 기인한 것인데, PC/TPU-35 블렌드는 24$0^{\circ}C$에서, PC/TPU-53은 25$0^{\circ}C$에서 관찰되었다. DSC로 측정된 열분해 온도는 GPC에 의한 블렌드 조성별 분자량과 분자량 분포도 및 점도 측정으로도 재확인되었다. PC/TPU-35와 PC/TPU-53의 두 가지 블렌드를 열분해 온도의 전ㆍ후에서 가열한 시료를 FT-IR로 분석한 결과, PC의 카르보닐 스트레칭은 1774$cm^{-1}$ /, TPU는 1732와 1704$cm^{-1}$ /에서 나타났으며, 블렌드에서는 두 가지 구성물질의 특성피크(카르보닐기와 N-H 그룹)에 변화가 없는 것으로 보아, 두 가지 블렌드 사이의 분자간 상호작용이나 에스테르 교환반응의 가능성이 없는 증거로 생각된다. 아울러 분해온도 이전에서 가공된 시료의 두께 의존성 충격강도 및 굴곡강도를 측정하고, 상 형태학과도 비교하였다.다.

  • PDF

In-situ Observations of Gas Phase Dynamics During Graphene Growth Using Solid-State Carbon Sources

  • Kwon, Tae-Yang;Kwak, Jinsung;Chu, Jae Hwan;Choi, Jae-Kyung;Lee, Mi-Sun;Kim, Sung Youb;Shin, Hyung-Joon;Park, Kibog;Park, Jang-Ung;Kwon, Soon-Yong
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.131-131
    • /
    • 2013
  • A single-layer graphene has been uniformly grown on a Cu surface at elevated temperatures by thermally processing a poly(methyl methacrylate) (PMMA) film in a rapid thermal annealing (RTA) system under vacuum. The detailed chemistry of the transition from solid-state carbon to graphene on the catalytic Cu surface was investigated by performing in-situ residual gas analysis while PMMA/Cu-foil samples being heated, in conjunction with interrupted growth studies to reconstruct ex-situ the heating process. The data clearly show that the formation of graphene occurs with hydrocarbon molecules vaporized from PMMA, such as methane and/or methyl radicals, as precursors rather than by the direct graphitization of solid-state carbon. We also found that the temperature for vaporizing hydrocarbon molecules from PMMA and the length of time the gaseous hydrocarbon atmosphere is maintained, which are dependent on both the heating temperature profile and the amount of a solid carbon feedstock are the dominant factors to determine the crystalline quality of the resulting graphene film. Under optimal growth conditions, the PMMA-derived graphene was found to have a carrier (hole) mobility as high as ~2,700 cm2V-1s-1 at room temperature, superior to common graphene converted from solid carbon.

  • PDF

반복핵이식에 의한 복제동물 생산에 관한 연구 III. 토끼에서 제3세대 복제수정란의 생산 (Study on Production of Cloned Animals by Recycling Nuclear Transplantation III. Production of Third Generation Cloned Embryos in Rabbits)

  • 이효종;전병균;윤희준;박충생;최상용;윤창현;강대진
    • 한국임상수의학회지
    • /
    • 제12권1호
    • /
    • pp.877-886
    • /
    • 1995
  • The recycling nuclear transplantation(NT) technique has the powerful potential of producing a large number of genetically identical embryos and offsprings from one embryo. Multiple generational cloning by this technique utilizes the NT embryo itself as the donor for the next generation of cloning. In this experiment, we have produced the third generational cloned embryos by recycling NT. Further we examined comparatively the electrofusion rate and in vitro developmental potential in the cloned embryos of the first second and third generations. The embryos of 16-cell stage were collected from the mated does by flushing oviducts with Dulberco's phosphate buffered saline containing 10 % fetal calf serum(FCS) at 47 hours after hCG injection. In the first generation NT, the nuclear donor embryos were synchronized in the phase of Gl/S transition of 32-cell stage. The first and second generation NT embryos developed to 16-cell were used as donor nuclei for second and third generation. The recipient cytoplasms were utilized the oocytes collected at 14 hours after hCG injection, following revoming the nucleus and the first polar body by micromanipulation. The separated blastomeres were injected into the enucleated recipient oocytes by micromanipulation and were fused by electrical stimulation. The electrofusion rate was seen to be 78.0, 88.0 and 90.3 % in the first second and third generation NT rabbit embryos, respectively. The fused oocytes were co-cultured with a monolayer of rabbit oviductal epithelial cells in M-199 solution containing 10 % FCS for 120 hours at 39$^{\circ}C$ in a 5% $CO_2$ incubator. The in vitro developmental potential to blastocyst stage was significantly(P<0.05) decreased in the third(7.2 %) generation NT embryos compared to the first(53.1 %) and second(16.1 %) generation NT embryos. Following in vitro development to blastocyst stage, they were stained with Hoechst 33342 dye for counting the number of blastomeres by fluorescence microscopy. The mean blastomere numbers and cell cycle numbers of NT embryos during the culture period were significantly(p<0.05) decreased in the second(93.9 cells and 6.55 cylces) and third(81.5 cells and 1.35 cylces) generation, compared to the first(189.9 cells and 7.55 cylces) generation.

  • PDF

초고압 동결 및 해동방법이 돈육의 물리적 특성에 미치는 효과 (Effect of High Pressure Freezing and Thawing Process on the Physical Properties of Pork)

  • 심국보;홍근표;최미정;민상기
    • 한국축산식품학회지
    • /
    • 제29권6호
    • /
    • pp.736-742
    • /
    • 2009
  • 본 실험은 초고압 동결 및 해동기법이 돈육의 이화학적 특성에 미치는 효과를 규명하고자 시도하였다. 동결 및 해동처리 과정에서 가압에 따른 pH 증가 및 단백질 변성에 따른 보수력의 저하로 관찰되었지만, 초고압 동결 기법을 이용함으로써 효과적으로 해동 및 가열감량을 최소화할 수 있었다. 반면에 초고압 해동기법은 느린 해동속도에 기인한 얼음 재결정화로 해동육의 수율 측면에 영향을 미칠것으로 판단되었다. 따라서 초고압 동결처리에 의한 빠른 동결 및 빠른 해동처리를 통하여 돈육의 물리적 특성 저하를 최소화할 수 있을 것으로 간주되었다. 반면에 250 MPa의 압력은 돈육의 색도에 부정적인 영향을 미치는 것으로 나타났다.

시험소각결과에 기준한 한국원자력연구소 소각시설의 방사학적 안전성 평가 (Radiological Safety Assessment for KAERI Incineration Plant on the Basis of Trial Burn Results)

  • 양희철;김봉환;김창회;박원만;정명수
    • Journal of Radiation Protection and Research
    • /
    • 제23권2호
    • /
    • pp.109-114
    • /
    • 1998
  • 모의 및 실폐기물 시험소각 결과를 기준으로 한국원자력연구소 소각시설의 상용운전을 위한 방사학적 위해성을 평가하였다. 연간 정상운전을 통해 배출되는 방사성 물질로 인한 환경영향은 물론 가상된 사고시의 단기(2시간 기준) 배출로 인한 환경적 영향은 무시할 수 있을 것으로 평가되었으나 정상운전시에 배출되는 주배출원인 반휘발성 방사성 세슘의 농도는 공기중 허용농도의 10%를 약간 상회하는 것으로 평가되었다. 비방사능 세슘추적자를 포함하는 모의폐기물의 시험소각을 통하여 포대 여과기의 응축상 세슘성분에 대한 제거특성을 고찰하였다. 포대여과장치를 통과하기전 배기체내에 확산과 관성의 전이영역에 분포하는 입자상 세슘성분은 5%에 불과하였다. 포대여과기의 세슘성분에 대한 총괄제거효율이 99.9% 이상이어서 방사성폐기물 소각설비의 저온 배기체처리계통의 일차 여과장치로서 충분한 제염성능을 가짐을 보였다.

  • PDF

Poloxamer 407 Hydrogels for Intravesical Instillation to Mouse Bladder: Gel-Forming Capacity and Retention Performance

  • Kim, Sang Hyun;Kim, Sung Rae;Yoon, Ho Yub;Chang, In Ho;Whang, Young Mi;Cho, Min Ji;Kim, Myeong Joo;Kim, Soo Yeon;Lee, Sang Jin;Choi, Young Wook
    • 대한비뇨기종양학회지
    • /
    • 제15권3호
    • /
    • pp.178-186
    • /
    • 2017
  • Purpose: Poloxamer 407 (P407) thermo-sensitive hydrogel formulations were developed to enhance the retention time in the urinary bladder after intravesical instillation. Materials and Methods: P407 hydrogels (P407Gels) containing 0.2 w/w% fluorescein isothiocyanate dextran (FD, MW 4 kDa) as a fluorescent probe were prepared by the cold method with different concentrations of the polymer (20, 25, and 30 w/w%). The gel-forming capacities were characterized in terms of gelation temperature (G-Temp), gelation time (G-Time), and gel duration (G-Dur). Homogenous dispersion of the probe throughout the hydrogel was observed by using fluorescence microscopy. The in vitro bladder simulation model was established to evaluate the retention and drug release properties. P407Gels in the solution state were administered to nude mice via urinary instillation, and the in vivo retention behavior of P407Gels was visualized by using an in vivo imaging system (IVIS). Results: P407Gels showed a thermo-reversible phase transition at $4^{\circ}C$ (refrigerated; sol) and $37^{\circ}C$ (body temperature; gel). The G-Temp, G-Time, and G-Dur of FD-free P407Gels were approximately $10^{\circ}C-20^{\circ}C$, 12-30 seconds, and 12-35 hours, respectively, and were not altered by the addition of FD. Fluorescence imaging showed that FD was spread homogenously in the gelled P407 solution. In a bladder simulation model, even after repeated periodic filling-emptying cycles, the hydrogel formulation displayed excellent retention with continuous release of the probe over 8 hours. The FD release from P407Gels and the erosion of the gel, both of which followed zero-order kinetics, had a linear relationship ($r^2=0.988$). IVIS demonstrated that the intravesical retention time of P407Gels was over 4 hours, which was longer than that of the FD solution (<1 hour), even though periodic urination occurred in the mice. Conclusions: FD release from P407Gels was erosion-controlled. P407Gels represent a promising system to enhance intravesical retention with extended drug delivery.

액정폴리알릴술폰의 합성 및 기체 선택투과 특성 (Synthesis and Selective Gas Permeability of Liquid Crystalline Poly(allyl sulfone) Networks)

  • 조병욱;최재곤;김준섭;최수경
    • Elastomers and Composites
    • /
    • 제40권2호
    • /
    • pp.136-142
    • /
    • 2005
  • 주사슬에 $SO_2$를 포함하고 곁사슬에는 메소겐기을 유연격자에 연결시킨 액정 poly (allylsulfone) network를 합성하여 이들의 기체 투과도 및 선택투과 특성을 조사하였다. 곁사슬에 메톡시를 갖는 단량체I은 한 개의 알릴단위를 갖고, 단량체II는 양쪽 말단에 두개의 알릴 단위를 가져 network 형성을 제어할 수 있도록 구성되었다 가교밀도의 증가는 고분자 network 내의 분자운동을 제한시키며 단량체 II 함량이 5% 이하인 경우는 segment의 운동이 충분히 펼쳐질 수 있어 등방상으로의 상전이가 일어날수 있다. Poly(II-5 $01/I-OCH_3$ 99)의 기체 투과도는 산소($O_2$)의 경우 2.58 barrel 인데 비하여, 수소($H_2$)의 경우는 18.4 barrer로서, 선택 투과도 ${\alpha}(H_2/O_2)$가 7에 가까우며, 또 선택 투과도 ${\alpha}(H_2/N_2)$는 23.9로서 가장 높은 값을 가짐을 관찰하였다. 가교도가 10%로 증가된 Poly(II-5 $10/I-OCH_3$ 90)의 경우 선택 투과도 ${\alpha}(H_2/N_2)$는 36.8로서 가교도 증가에 따르는 선택투과도의 증가를 보여주었다.

In situ 중합에 의해서 제조된 TLCP/PBT 블렌드의 특성 연구 (On the Properties of TLCP/PBT Blends Prepared by In Situ Polymerization in PBT Solution)

  • 최재곤;박일수;김선;최유성;이응재;조병욱
    • Elastomers and Composites
    • /
    • 제39권3호
    • /
    • pp.217-227
    • /
    • 2004
  • 주사슬에 triad 메소겐 단위와 butylene terephthalate (BT) 단위를 갖는 새로운 액정 중합체를 중축합에 의해서 합성하였다. 합성된 중합체는 nematic 액정상을 보였으며 액정상으로의 전이온도는 $260^{\circ}C$를 보였다. PBT 용액에서 in-situ 중합에 의해서 제조된 TLCP/PBT 블렌드들의 특성 조사는 DSC, TGA, SEM, XRD 그리고 DMTA를 이용하여 이루어 졌다. 블렌드들은 PBT 매트릭스내에서 $0.05{\sim}0.2{\mu}m$ 사이즈를 갖는 잘 분산된 TLCP상들을 보여 주었다. TLCP 농도가 5에서 20wt%로 증가함에 따라서 블렌드내의 순수한 PBT의 ${\Delta}Hm$은 증가하였다. 이는 TLCP가 PBT 매트릭스 내에서 조핵제의 역할을 하였기 때문이다. 블렌드의 기계적 성질들은 TLCP의 농도에 의존하였는데 이 또한 TLCP가 블렌드 내에서 보강제 역할을 하였기 때문이다. 액정상과 PBT 매트릭스 상간에 좋은 계면 접착력을 보여 주었으며 in-situ 중합에 의해서 제조된 블렌드는 용융 블렌딩에 의해서 제조된 블렌드들보다 더욱더 높은 기계적 성질과 잘 분산된 TLCP 도메인들을 보여 주었다.