• Title/Summary/Keyword: Transition method

Search Result 2,800, Processing Time 0.028 seconds

Multi-scale Progressive Fatigue Damage Model for Unidirectional Laminates with the Effect of Interfacial Debonding (경계면 손상을 고려한 적층복합재료에 대한 멀티스케일 피로 손상 모델)

  • Dongwon Ha;Jeong Hwan Kim;Taeri Kim;Young Sik Joo;Gun Jin Yun
    • Composites Research
    • /
    • v.36 no.1
    • /
    • pp.16-24
    • /
    • 2023
  • This paper presents a multi-scale progressive fatigue damage model incorporating the model for interfacial debonding between fibers and matrix. The micromechanics model for the progressive interface debonding was adopted, which defined the four different interface phases: (1) perfectly bonded fibers; (2) mild imperfect interface; (3) severe imperfect interface; and (4) completely debonded fibers. As the number of cycles increases, the progressive transition from the perfectly bonded state to the completely debonded fiber state occurs. Eshelby's tensor for each imperfect state is calculated by the linear spring model for a damaged interface, and effective elastic properties are obtained using the multi-phase homogenization method. The fatigue damage evolution formulas for fiber, matrix and interface were proposed to demonstrate the fatigue behavior of CFRP laminates under cyclic loading. The material parameters for the fiber/matrix fatigue damage were characterized using the chaotic firefly algorithm. The model was implemented into the UMAT subroutine of ABAQUS, and successfully validated with flat-bar UD laminate specimens ([0]8,[90]8, [30]16) of AS4/3501-6 graphite/epoxy composite.

A Study on the Method of Activation of Space of Gwangheemun Considering Historical and Cultural Speciality (역사·문화적 특수성을 고려한 광희문(光熙門)의 공간 활성화 방안 연구)

  • Kim, Ji Eun;Park, Eun Soo
    • Korea Science and Art Forum
    • /
    • v.19
    • /
    • pp.243-257
    • /
    • 2015
  • The Cultural Heritage Administration has selected Seoul Fortress Wall as the representative heritage of Korea to be applied for being registered as UNESCO World Heritage and announced the plan to restore and organize it, which has increased the interest to the Seoul Fortress Wall, the Historical Site No. 10. The great work to make the heritage value of Walls, 4 Big Gates and 4 Small Gates composing the Seoul Fortress wall with the length of 18.627 km to be recognized worldwide has limits if it is focused only on the physical restoration. It is because the Seoul Fortress Wall represents the long historical and cultural value as the space of life which connects closely the capital city and its vicinity. We need the plan to discover and utilize historical and cultural contents of Seoul Fortress Wall and its vicinity. Especially, Gwangheemun, which is one of the four Small Gates of Seoul Fortress Wall, is a precious cultural heritage which represents the transition of fortification technology of Chosun period as the space representing ordinary people. However, now Gwangheemun and its vicinity does not stand out the charm because of passive accessibility, landscape falling behind and absence of program. This made the lack of domestic and overseas tourists and the convenient space and various contents. This reality is because the value of space has been considered simply as a cultural heritage without considering the traditional, historical and cultural specificity. Therefore, this study is aimed to find the meaning and value of Gwangheemun by discovering its own latent intangible cultural, historical and artistic resource, and to find the way to connect with Gwangheemun, the existing tangible traditional architectural space and the way of vitalizing Gwangheemun as a new space.

The Possibility of Design Creation by Convergence of Contemporary technology and Traditional Craft (신기술과 공예의 융합을 통한 디자인 창작의 가능성)

  • Ha, Euna
    • Korea Science and Art Forum
    • /
    • v.25
    • /
    • pp.463-475
    • /
    • 2016
  • As the transition to the digital age in the late 20th century, the intrinsic value of the craft, the emotional values of human, has been noticed as an alternative to overcome the adverse effects of the modernism of the industrial age. To introduce experimental tries which convergence of contemporary technologies and elements of traditional craft, and to inspire artists and present the new possibility of creation to them who want to take advantage of craft emotion as the elements of creation is the purpose of this study in the current digital technology age. First, the meaning and value of craft in modern times and digital media and hybrid creation environments are theoretically investigated based on previous studies and literature. Second, design cases produced by combining digital technology as a tool and craft elements are classified for substantial understanding of the design. Thirdly, identify the design characteristics presented through case studies and suggest the new possibility of creation. The results of the study are as follows. Reject typical types highlight the functional role and try free express conversion, e.g. form, material, texture, making process etc. Extracts the various elements that can be applied and search combining ways, because the convergence of digital technology and the craft is sufficient to activate the human emotion. Interaction between the craft and the digital medium is made actively. Craft accepts digital form, the craft appeared again as the contents of the digital. the traditional and digital method appropriately fused and utilized depending on the situation in process.

Numerical Modeling of Thermoshearing in Critically Stressed Rough Rock Fracture: DECOVALEX-2023 Task G (임계응력 하 거친 암석 균열의 Thermoshearing 수치모델링: 국제공동연구 DECOVALEX-2023 Task G)

  • Jung-Wook Park;Chan-Hee Park;Li Zhuang;Jeoung Seok Yoon;Changlun Sun;Changsoo Lee
    • Tunnel and Underground Space
    • /
    • v.33 no.3
    • /
    • pp.189-207
    • /
    • 2023
  • In the present study, the thermoshearing experiment on a rough rock fracture were modeled using a three-dimensional grain-based distinct element model (GBDEM). The experiment was conducted by the Korea Institute of Construction Technology to investigate the progressive shear failure of fracture under the influence of thermal stress in a critical stress state. The numerical model employs an assembly of multiple polyhedral grains and their interfaces to represent the rock sample, and calculates the coupled thermo-mechanical behavior of the grains (blocks) and the interfaces (contacts) using 3DEC, a DEM code. The primary focus was on simulating the temperature evolution, generation of thermal stress, and shear and normal displacements of the fracture. Two fracture models, namely the mated fracture model and the unmated fracture model, were constructed based on the degree of surface matedness, and their respective behaviors were compared and analyzed. By leveraging the advantage of the DEM, the contact area between the fracture surfaces was continuously monitored during the simulation, enabling an examination of its influence on shear behavior. The numerical results demonstrated distinct differences depending on the degree of the surface matedness at the initial stage. In the mated fracture model, where the surfaces were in almost full contact, the characteristic stages of peak stress and residual stress commonly observed in shear behavior of natural rock joints were reasonably replicated, despite exhibiting discrepancies with the experimental results. The analysis of contact area variation over time confirmed that our numerical model effectively simulated the abrupt normal dilation and shear slip, stress softening phenomenon, and transition to the residual state that occur during the peak stress stage. The unmated fracture model, which closely resembled the experimental specimen, showed qualitative agreement with the experimental observations, including heat transfer characteristics, the progressive shear failure process induced by heating, and the increase in thermal stress. However, there were some mismatches between the numerical and experimental results regarding the onset of fracture slip and the magnitudes of fracture stress and displacement. This research was conducted as part of DECOVALEX-2023 Task G, and we expect the numerical model to be enhanced through continued collaboration with other research teams and validated in further studies.

The effects of music therapy on labor pain, childbirth experience, and self-esteem during epidural labor analgesia in primiparas: a non-randomized experimental study (음악요법이 초산부의 경막하 무통 분만 중 분만통증, 분만경험, 자아존중감에 미치는 효과: 유사실험 연구)

  • Seong Yeon An;Eun Ji Park;Yu Ri Moon;Bo Young Lee;Eunbyul Lee;Dong Yeon Kim;Seong Hee Jeong;Jin Kyung Kim
    • Women's Health Nursing
    • /
    • v.29 no.2
    • /
    • pp.137-145
    • /
    • 2023
  • Purpose: This non-randomized study was performed to evaluate the effects of music therapy on labor pain, the childbirth experience, and self-esteem in women during vaginal delivery. Methods: In total, 136 primiparous women over 37 weeks of gestation receiving epidural analgesia during vaginal delivery were recruited via convenience sampling. To minimize diffusion effects, data from the control group (n=71) were collected first (April 2020 to March 2021), followed by data from the music group (n=65; April 2021 to May 2022). Participants in the music group listened to classical music during labor, while the control group was offered usual care (no music). Labor pain was measured using a numeric rating scale (NRS), and self-esteem and childbirth experience were collected using self-report questionnaires. Data were analyzed using the independent t-test, chi-square test and Cronbach's α coefficients. Results: The overall pain level (NRS) at baseline was 0 in both groups. Mothers in the music therapy group had lower levels of latent pain (t=1.95, p=.005), active pain (t=3.69, p<.001) and transition-phase pain (t=7.07, p<.001) than the control group. A significant difference was observed between the two groups, and the music therapy group expressed more positive perceptions of the childbirth experience (t=-1.36, p=.018). For self-esteem, the experimental group's score was slightly higher, but without a statistically significant difference from the control group. Conclusion: Using music therapy during labor decreased labor pain and improved the childbirth experience. Music therapy can be clinically recommended as a non-pharmacological, safe, and easy method for nursing care in labor.

Downscaling Technique of Monthly GCM Using Daily Precipitation Generator (일 강수발생모형을 이용한 월 단위 GCM의 축소기법에 관한 연구)

  • Kyoung, Min Soo;Lee, Jung Ki;Kim, Hung Soo
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.5B
    • /
    • pp.441-452
    • /
    • 2009
  • This paper describes the evaluation technique for climate change effect on daily precipitation frequency using daily precipitation generator that can use outputs of the climate model offered by IPCC DDC. Seoul station of KMA was selected as a study site. This study developed daily precipitation generation model based on two-state markov chain model which have transition probability, scale parameter, and shape parameter of Gamma-2 distribution. Each parameters were estimated from regression analysis between mentioned parameters and monthly total precipitation. Then the regression equations were applied for computing 4 parameters equal to monthly total precipitation downscaled by K-NN to generate daily precipitation considering climate change. A2 scenario of the BCM2 model was projected based on 20c3m(20th Century climate) scenario and difference of daily rainfall frequency was added to the observed rainfall frequency. Gumbel distribution function was used as a probability density function and parameters were estimated using probability weighted moments method for frequency analysis. As a result, there is a small decrease in 2020s and rainfall frequencies of 2050s, 2080s are little bit increased.

Analysis of the relationship with the Human Resource in the service economy era according to the type of organization -Focusing on organizational culture and structure - (조직유형에 따른 서비스경제시대 인재상 관계분석 -조직문화와 조직구조를 중심으로-)

  • Baek Kyeong Hui;Kim Hyun Soo
    • Journal of Service Research and Studies
    • /
    • v.11 no.3
    • /
    • pp.98-116
    • /
    • 2021
  • With the advent of the era of the 4th industrial revolution, various factors such as economy, management, and culture are changing in modern society, unlike in the past. Among them, the main characteristic of management is the change from intangible goods to tangible goods, and companies are trying to pursue innovation such as introducing a new management method, converting from manufacturing to service, and expanding technology. However, with regard to human resources, which is becoming the most important for sustainable value creation in a changing era, efforts to enable practical innovation are lacking as they are still in a simple transition. Therefore, in this study, after recognizing the importance of human resources, we verified the relationship between the elements of the human resource in the service economy era according to organizational culture and organizational structure. The relationship between organizational culture and organizational structure by type was verified using the items of human resources, we verified the relationship between the elements of the human resource in the service economy era that were derived and verified in recent research. As a result, there were some significant differences in the image of human resources, we verified the relationship between the elements of the human resource by organizational culture and type of organization, but when the two factors were combined and interpreted, it was found that all of the human resources, we verified the relationship between the elements of the human resource in the service economy era were necessary. However, in order to overcome the limitation that the indicators of this study were limited, it is necessary to continue research through samples that consider various factors in the future and systematic classification by type of organization and industry by industry.

A Research on the Development of Service Nature Measurement Items in the Sevice Economic Era (서비스 경제로의 전환에 따른 서비스본질 측정항목 개발 연구)

  • An Sehong;Kim Hyunsoo
    • Journal of Service Research and Studies
    • /
    • v.11 no.1
    • /
    • pp.59-79
    • /
    • 2021
  • Service-related research in accordance with the transition to the service economy era has been conducted in a wide variety of ways, but the development of a service-related scale suitable for the present time is still insignificant. The purpose of this study is to define the nature of services and to develop measurement items for them. First, four categories of service nature were adopted in the previous study. The four categories are 'relationship', 'interactivity', 'horizontality', and 'harmony'. In this study, sub-factors and specific items of each of these four service essences were extracted and developed as measurable items. As a qualitative study, the four categories of sub-factors were extracted, and a mixed study was adopted to prove the reliability and validity of the extracted factors through quantitative studies. The scale items were identified through literature study, free response method, and Delphi technique, and the measurement items were refined through a second questionnaire of 30 Delphi panels composed of experts. As a result of the study, 15 out of 52 questions for relationship, 11 out of 45 questions for bilateral direction, 9 out of 33 questions for horizontality, and 17 out of 61 questions for harmonization were derived after secondary refining. Through this study, it was possible to uncover new essential items suitable for the service economy era. SNS, network, synergy, platform, system, real name, and breakthrough are concepts that have not been obtained in previous studies, and can be seen as contributions of this study. However, due to various limitations, this study did not cover all aspects of the service, but mainly dealt with people-centered services, which are part of the service. In the future, it is necessary to study the development of service essence measurement items for the overall aspect of services developed according to the evolution of the service economy era.

Development of Video-Detection Integration Algorithm on Vehicle Tracking (트래킹 기반 영상검지 통합 알고리즘 개발)

  • Oh, Jutaek;Min, Junyoung;Hu, Byungdo;Hwang, Bohee
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.29 no.5D
    • /
    • pp.635-644
    • /
    • 2009
  • Image processing technique in the outdoor environment is very sensitive, and it tends to lose a lot of accuracy when it rapidly changes by outdoor environment. Therefore, in order to calculate accurate traffic information using the traffic monitoring system, we must resolve removing shadow in transition time, Distortion by the vehicle headlights at night, noise of rain, snow, and fog, and occlusion. In the research, we developed a system to calibrate the amount of traffic, speed, and time occupancy by using image processing technique in a variety of outdoor environments change. This system were tested under outdoor environments at the Gonjiam test site, which is managed by Korea Institute of Construction Technology (www.kict.re.kr) for testing performance. We evaluated the performance of traffic information, volume counts, speed, and occupancy time, with 4 lanes (2 lanes are upstream and the rests are downstream) from the 16th to 18th December, 2008. The evaluation method performed as based on the standard data is a radar detection compared to calculated data using image processing technique. The System evaluation results showed that the amount of traffic, speed, and time occupancy in period (day, night, sunrise, sunset) are approximately 92-97% accuracy when these data compared to the standard data.

A Case Study on Autobiography Writing Program for Older Adults (노인자서전 쓰기 교육 프로그램 사례 연구)

  • Ji, Haeng Jung;Han, Jungran;Park, Seong Hie
    • 한국노년학
    • /
    • v.31 no.2
    • /
    • pp.223-241
    • /
    • 2011
  • The purpose of this research is to analyze the effect of an autobiography writing program as a method of education for older adults. The authors participated in the processes of all 10 sessions of the autobiography writing program as instructors or program assistants at a senior welfare center in Seoul, 2007. Data used for analysis were learners' narrations in class, written autobiographies by learners, and researchers' memo-notes. We analyzed their narrative flows using Haenninen(2000)'s theory of narrative flow and reconstructed their categories of activities as life histories. 'The innen narration' constructed by learners was a spiritual process in which they have imbued their life and living conditions with meaning. The learners reminisced their lives as 'unreflective narration' in the beginning of education. However, as the class went on, they gradually reminisced them as "reflective narration" and finally developed them as 'meta-reflective narration' through the intentional reflection. Likewise, we could interpret the transition of learners into meta-reflecter as the completion of ego-integration. As a conclusion, we found the effects of the autobiography writing education for older adults in educational, social, and psychological aspects.