• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.6
• /
• pp.25-40
• /
• 2015

Korean tourist areas are designated/managed in accordance with the Tourism Promotion Act. Since Taejongdae was designated as a tourist area in 1969, a total of 230 tourist areas have been designated/built/operated. It has been 46 years since the first tourist area was designated. According to the Tourism Area Life Cycle by Butler, it is estimated that the flow of the life cycle will be reflected in ups and downs over time. Thus, this study aimed to provide basic data for suggesting the direction of changes and development of the future tourist areas after analyzing the life cycle stage of domestic tourist areas, by applying the Tourism Area Life Cycle by Butler. The research method was based on the tourist areas by year, the number of visitors, and data of the target to derive the change transition curve, obtained by dividing the life cycle stages of the tourist areas based on the visitor rate of change. In the analysis results, more than 1/3 of domestic tourist areas are reaching the stagnation/decline stage, and tourist areas such as hot springs and seaside/beach resources show a particularly high ratio of stagnation/decline. The tourist areas that already have reached the stagnation/decline stage will need to analyze the causes for the decline, seek for resolution measures, and introduce new innovative elements. Even though the results of this study are not sufficient to be used as an absolute standard to decide the life cycle stage of domestic tourist areas, it is considered to be adequate for phenomenologically understanding the life cycle stage of Korean tourist areas. Based on this study, the causes for the stagnation/decline of tourist areas can be revealed while it can be also used as basic research to establish revitalization measures for tourist areas by introducing new innovation.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.85-89
• /
• 2006

The effect of vapor grown carbon fiber (VGCF) contents on electrical and rheological properties of VGCF filled polyphenylene sulfide (PPS) composites prepared through melt mixing using a twin screw exruder was studied. This method was proved to be quite effective to produce good dispersion of VGCF in the matrix even for highly filled PPS. From the dependence of the electrical conductivity on VGCF content, the percolation phenomena began to occur above $10\;wt\%$. While there is only a marginal increase of viscosity for 1 and $5\;wt\%$ VGCF filled PPS, the composites containing $10\;wt\%$. While VGCF showed abrupt increase in viscosity as well as flattening of frequency vs modulus curve, indicating a transition from a liquid-like to a solid-like behavior due to the creation of VGCF network. This result agrees well to the fact that the network formation in the composite can be composite by rheological property dependence on filler content as well as by electrical conductivity measurement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.271-272
• /
• 2012

Bulk Metallic Glasses (BMGs or amorphous alloy) exhibit high strength and good corrosion resistance. Applications of thin films and micro parts of BMGs have been used a lot since its inception in the research of BMGs. However, Application and fabrication of BMGs are limited to make structural materials. Thin films of BMGs which is sputtered on the surface of structural materials by sputtering process is used to improve limits about application of BMGs. In order to investigate the difference of properties between designed alloys and thin films, we identified that thin films deposited on the surface that have the characteristic of the amorphous films and the composition of designed alloys. Zr-Cu (Cu=30, 35, 38, 40, 50 at.%) and Zr-Cu-Al (Al=10 at.% fixed, Cu=26, 30, 34, 38 at.%) alloys were fabricated with Zr (99.7% purity), Cu (99.997% purity), and Al (99.99% purity) as melting 5 times by arc melting method before rods 2mm in diameter was manufactured. In order to analyze GFA (Glass Forming Ability), rods were observed by Optical Microscopy and SEM and $T_g$, $T_x$, ($T_x$ is crystallization temperature and $T_g$ is the glass transition temperature) and Tm were measured by DTA and DSC. Powder was manufactured by Gas Atomizer and target was sintered using powder in large supercooled liquid region ($=T_x-T_g$) by SPS(Spark Plasma Sintering). Amorphous foil was prepared by RSP process with 5 gram alloy button. The composition of the foil and sputtered thin film was analyzed by EDS and EPMA. In the result of DSC curve, binary alloys ($Zr_{62}Cu_{38}$, $Zr_{60}Cu_{40}$, $Zr_{50}Cu_{50}$) and ternary alloys ($Zr_{64}Al_{10}Cu_{26}$, $Zr_{56}Al_{10}Cu_{34}$, $Zr_{52}Al_{10}Cu_{38}$) have $T_g$ except for $Zr_{70}Cu_{30}$ and $Zr_{60}Al_{10}Cu_{30}$. The compositions with $T_g$ made into powders. Figure shows XRD data of thin film showed similar hollow peak.

• Korean Journal of Environmental Biology
• /
• v.23 no.3 s.59
• /
• pp.304-314
• /
• 2005

The occurrence of cyanobacterial bloom in Korean lakes of the summer is generalized. The characteristic of cyanobacterial community was explored. And the developmental stage of cyanobacterial bloom was divided into three phases, 'preparatory phase', 'bloom phase' and 'extinction phase' Cyanobacterial bloom started during the end of June at site 1, transition Bone of Lake Daecheong. The period of water bloom in normal year was about 60~70 days at site 4, lacustrine Bone, but it was unusually 11 days from July 19 in 1999. M. aerugilnosa first occurred in June, had a peak of standing crop curve from the end of August to the beginning of September in 1998 and 2002 and the end of July in 1999 and 2001. The standing crop of M. aeruginosa occupied $68.1\%$ of phytoplankton, $74.2\%$ of cyanobacteria and $88.8\%$ of genus Microcystis, Anabaena spp. first occurred in April, was above 10,000 cells $mL^{-1}$ from the end of August to about the middle of September in 1998. The effect of rainfalls on cyanobacterial bloom was different according to the phases. The rainfalls of preparatory phase assist the growth of cyanobacteria, but accelerate the decrease of cyanobacteria in extinction phase. In bloom phase, the heavy rainfalls reduce the development of the bloom, while the slight ones display only a little effects.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.453-459
• /
• 2000

FED has deserved an intensive attentioD as a new flat panel display. The present investigationaims at undemtanding the photoluminescence and cathodoluminescent properties of hGaO$_3$: $Eu^{3+}$ phosphor bytaking into account the possibility that this phosphor could be applied for FED. In onler to investigate on.sucha detailed behavior; 8everM experimental skil18 Je conducted to the LaGaO$_3$:$Eu^{3+}$ phosphoL The excimtion srectrum artd emission spectmn were rnezsured in the UV range and then decay curve of $^5D_0$+$^7F_j$transitions\vas examined. The decay behavior of $^5D_0$ emission was anMyzed by a newly Iuoposed cross-relaxation mech-ani8In in asswiation with inteFwnter di1ffision (or migration). The cross-mlaxation from $^5D_0$ to CTB (Cha'geTransfer Band) wuld be a quite retsonable by considering the excitation spectrum. It could be also found thatthe quenching type was changed from ditfrsion controlled process to the direct quenching process -s inJeasing $Eu^{3+}$ oncntration.

• Journal of Plant Biology
• /
• v.28 no.2
• /
• pp.165-175
• /
• 1985

The natural forest vegetation of the Piagol, Mt. Chiri, was classified into five major communities, i.e. Quercus mongolica, Carpinus laxiflora, C. tschonoskii, Q. serrata and Fraxinus mandshurica community. C. tschonoskii, C. laxiflora and Q. mongolica characteristically were dominated in the range of 500∼700 m, 700∼900 m and 900∼1,400 m in altitude, respectively. Abies nephrolepis and Rhododendron schlippenbachii in the ridge of Nogodan-Nalnaribong, and F. mandshurica and Q. serrata in the Yongsuam ravine were found as the dominant species. The transition between C. tschonoskii and C. laxiflora communities was relatively wide. The boundary between F. mandshurica, in the conglomerated zone, and the other communities surrounding its community was fairly abrupt. In Q. mongolica community, the canopy was relatively opened and the oak young tree of undergrowth was fairly dense. In the community of C. laxiflora and C. tschonoskii, the species composed of their understory was rich while their coverage was lower than that of Q. mongolica community. Shannon's diversity index was decreased in order of C. tschonoskii, C. laxiflora and Q. mongolica community, while their Simpson's dominance index increased conversely. Judging by the DBH-class distribution showing the negative exponential curve, these communities were considered as the climax forest. In Polar Ordination used samples (quadrats), the vegetation of the Piagol was divided into five groups, which was coincided with five communities classified by Braun-Blanquet system. In the ordination, the first axis and the second axis may be considered soil conditions and thermal conditions, respectively. It seems that two different methods, phytosociological method in macro level and ordination techniques in micro level, are useful for the vegetation classification.

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.111-122
• /
• 1997

The calculation of phase velocities in Spectral-Analysis -of-Surface -Waves (SASW) meas urements requires unwrapping phase angles. In case of layered systems with strong stiffness contrast like a pavement system, conventional phase unwrapping algorithm to add in teger multiples of 2n to the principal value of a phase angle may lead to wrong phase volocities. This is because there is difficulty in counting the number of jumps in the phase spectrum especially at the receiver spacing where the measurements are in the transition Bone of defferent modes. A new phase interpretation scheme, called "Impulse Response Fil traction ( IRF) Technique," is proposed, which is based on the separation of wave groups by the filtration of the impulse response determinded between two receivers. The separation of a wave group is based on the impulse response filtered by using information from Gabor spectrogram, which visualizes the propagation of wave groups at the frequency -time space. The filtered impulse response leads to clear interpretation of phase spectrum, which eliminates difficulty in counting number of jumps in the phase spectrum. Verification of the IRF technique was performed by theoretical simulation of the SASW measurement on a pavement system which complicates wave propagation.opagation.

• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.277-283
• /
• 2005

LV transition curves for poly(ethylene-co-15.3 mol% octene) ($PEO_{15}$) and poly(ethylene- co-17.0 mol% octene) ($PEO_{17}$) were measured in cyclo-pentane and cyclo-hexane. Between $40{\sim}150^{\circ}C$, the LV curve for ($PEO_{15}$ + cyclo pentane) located $1.1{\sim}2.7$ bar higher than that for ($PEO_{17}$+ cyclo-pentane). In cyclo-hexane, similar behavior was observed for $PEO_{15}$ and $PEO_{17}$ solution except the pressure difference reduced to $0.9{\sim}l.6$ bar. If the backbone structure of $PEO_{15}$ were identical to that of $PEO_{17}$, the LV line for $PEO_{17}$ would locate at high pressures than that for $PEO_{15}$, since the number average molecular weight of $PEO_{17}$ (Ave. Mn=153,040) is 1.9 times higher 4han that of $PEO_{15}$ (Ave. Mn=82,200). The difference in the octene comonomer content between $PEO_{15}$ and $PEO_{17}$ is only 1.7 mole%, nevertheless this small difference in the backbone structure of the PEO greatly affected the location of the L-V curves in the mixtures comprised of PEO and cyclo-alkane.

• Journal of Veterinary Clinics
• /
• v.39 no.5
• /
• pp.199-206
• /
• 2022

Postpartum diseases should be predicted to prevent productivity loss before calving especially in organic dairy farms. This study was aimed to investigate the incidence of postpartum metabolic diseases in an organic dairy farm in Korea, to confirm the association between diseases and prepartum blood biochemical parameters, and to evaluate the accuracy of these parameters with a receiver operating characteristic (ROC) analysis for identifying vulnerable cows. Data were collected from 58 Holstein cows (16 primiparous and 42 multiparous) having calved for 2 years on an organic farm. During a transition period from 4 weeks prepartum to 4 weeks postpartum, blood biochemistry was performed through blood collection every 2 weeks with a physical examination. Thirty-one (53.4%) cows (9 primiparous and 22 multiparous) were diagnosed with at least one postpartum disease. Each incidence was 27.6% for subclinical ketosis, 22.4% for subclinical hypocalcemia, 12.1% for retained placenta, 10.3% for displaced abomasum and 5.2% for clinical ketosis. Between at least one disease and no disease, there were significant differences in the prepartum levels of parameters like body condition score (BCS), non-esterified fatty acid (NEFA), total bilirubin (T-bil), direct bilirubin (D-bil) and NEFA to total cholesterol (T-chol) ratio (p < 0.05). The ROC analysis of each of these prepartum parameters had the area under the curve (AUC) <0.7. However, the ROC analysis with logistic regression including all these parameters revealed a higher AUC (0.769), sensitivity (71.0%), and specificity (77.8%). The ROC analysis with logistic regression including the prepartum BCS, NEFA, T-bil, D-bil, and NEFA to T-chol ratio can be used to identify cows that are vulnerable to postpartum diseases with moderate accuracy.

• Environmental and Resource Economics Review
• /
• v.33 no.2
• /
• pp.113-133
• /
• 2024

Variable renewable energy (VRE) such as solar and wind power is the main sources of achieving carbon net zero, but it undermines the stability of power supply due to high variability and uncertainty. Energy storage system (ESS) can not only reduce the curtailment of VRE by load shifting but also contribute to stable power system operation by providing ancillary services. This study analyzes how the allocation of ESS resources between load shifting and ancillary service can contribute to maximizing the efficiency of power supply in a situation where the problems caused by VRE are becoming more and more serious. A stochastic power system optimization model that can realistically simulate the variability and uncertainty of VRE was applied. The analysis time point was set to 2023 and 2036, and the optimal resource allocation strategy and benefits of ESS by varying VRE penetration levels were analyzed. The analysis results can be largely summarized into the following three. First, ESS provides excellent functions for both load shifting and ancillary service, and it was confirmed that the higher the reserve price, the more limited the load shifting and focused on providing reserve. Second, the curtailment of VRE can be a effective substitute for the required reserve, and the higher the reserve price level, the higher the curtailment of VRE and the lower the required amount of reserve. Third, if a reasonable reserve offer price reflecting the opportunity cost is applied, ESS can secure economic feasibility in the near future, and the higher the proportion of VRE, the greater the economic feasibility of ESS. This study suggests that cost-effective low-carbon transition in the power system is possible when the price signal is correctly designed so that power supply resources can be efficiently utilized.