• Journal of the Korean Institute of Telematics and Electronics
• /
• v.5 no.1
• /
• pp.13-25
• /
• 1968

A detailed analysis of the transistor wide-band feedback amplifiers using the hybrid-$\pi$ equivalent circuit has been made. It is considered both for the low freqnency and for the high frequency. The expressions of the gain, bandwidth. input impedance and output impedance have been presented. It is shown that a series feedback amplifier should be driven from the voltage source and should drive into the low resistance load, and a shunt feedback amplifier should be driven from the current source and should drive into the high resistance load. It is also shown that these stages can be coupled without use of the buffer stage or coupling transformer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.52-52
• /
• 2009

In this work, we demonstrate the modelling and simulation of the AlGaAs/GaAs quantum-well based light emitting transistor(LET). Based on the experimental and theoretical model, we have compared between a heterojunction bipolar transistor(HBT) structure with quantum wells in the base region and a HBT without quantum wells in the base region. For the purpose of optimizing device design, several analytic and numerical studies have been presented.

• ETRI Journal
• /
• v.7 no.4
• /
• pp.11-14
• /
• 1985

A polysilicon self-aligned bipolar n-p-n transistor structure is described, which can be used in high speed and high packing density LSI circuits The emitter of this transistor is separated less than $0.4\mum$ with base contact by polysilicon self-align technology. Through all the process, the active region of this device is not damaged. therefore a high performance device is obtained. Using the transistor with $3.0\mum$ design rules, a CML ring oscillator has per-gate minimum propagation delay time of 400 ps at 2.7 mW power consumption condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2287-2290
• /
• 2003

The electrical characteristics of power devices such as BJT (Bipolar Junction Transistor), and MOSFET (Metal Oxide Field Effect Transistor), etc, are altered due to impinging photon radiation and temperature in the nuclear or the space environment. In this paper, BJT and MOSFET are the two devices subjected to ${\gamma}$ radiation. In the case of BJT, the current gain (${\beta}$) and the collector to Emiter breakdown voltage ($V_{CEO}$) are the two main parameters considered. When it was subjected to ${\gamma}$ rays, the ${\beta}$ decreases as the dose level increases, whereas, $V_{CEO}$ gradually increases as the dose level increases. In the case of MOSFET, the threshold voltage is decreasing as the dose level increases. Here it has been observed the decent rate is an increasing function of the threshold voltage. The on-resistance does not change with respect to the dose. Both the devices recover back the original specification after the annealing is finished. No permanent damage has been occurred.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.11
• /
• pp.698-703
• /
• 2015

In this study, we fabricated the dual gate (DG) ion-sensitive field-effect-transistor (ISFET) with flexible polyimide (PI) extended gate (EG). The DG ISFETs significantly enhanced the sensitivity of pH in electrolytes from 60 mV/pH to 1152.17 mV/pH and effectively improved the drift and hysteresis phenomenon. This is attributed to the capacitive coupling effect between top gate and bottom gate insulators of the channel in silicon-on-transistor (SOI) metal-oxide-semiconductor (MOS) FETs. Accordingly, it is expected that the PI-EG based DG-ISFETs is promising technology for high-performance flexible biosensor applications.

• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.180-187
• /
• 1997

We demonstrate the improvement of sensitivity and analysis of operating characteristics of the piezoelectric pressure sensor using ZnO piezoelectric thin film and FET(field effect transistor) for sensing applied pressure and transforming the pressure into electrical signals, respectively. The sensitivity of the PSFET(pressure sensitive field effect transistor) was improved by using highly-oriented ZnO film perpendicular to the substrate surface and the operating characteristics was investigated by monitoring output voltage with time in various static pressure levels.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.1
• /
• pp.47-52
• /
• 2007

Organic field-effect transistors (OFETS) are of interest for use in widely area electronic applications. We fabricated a copper phthalocyanine (CuPc) based field-effect transistor with varying channel length. The CuPc FET device was made a top-contact type and the channel length was a $100\;{\mu}m,\;50\;{\mu}m,\;40\;{\mu}m,\;and\;30\;{\mu}m$ and the channel width was a fixed at 3 mm. We observed a typical current-voltage (I-V) characteristics in CuPc FET with varying channel length (L) and we calculated the effective mobility. Also, we measured a capacitance-voltage (C-V) by applied bias voltage with varying frequency at 43, 100, 1000 Hz.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.2
• /
• pp.74-79
• /
• 2003

The method of the analysis of the base Gummel number of the BJT(Bipolar Junction Transistor) for integrated circuits based upon the semiconductor physics is proposed and the method of calculating the doping profile of the base region using process conditions is presented. The transistor saturation current obtained from the proposed method of NPN BJT using 20V and 30V process shows an averaged relative error of 6.7% compared with the measured data and the transistor saturation current of PNP BJT shows an averaged relative error of 9.2% compared with the measured data

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.166-170
• /
• 2003

This paper presents the TTFC(Two Transistor Forward Converter) using Synchronous Rectifier of Compulsory Control-driver. The two transistor forward circuit is used to decrease voltage stress of primary side and the synchronous rectifier is used to reduce current stress of secondary side. Previous synchronous rectifier's MOSFET of TTFC have long dead time This paper presents synchronous rectifier of compulsory control-driver for minimized dead time. This paper compared with diode rectifier, self-driven synchronous rectifier and compulsory control-driver synchronous rectifier of TTFC. The principle of operation, feature and design considerations are illustrated and verified through the experiment with a 200W 100kHz MOSFET based experimental circuit.

• 전기의세계
• /
• v.27 no.4
• /
• pp.45-51
• /
• 1978

A new method of realizing the field effect transistor with a sub-.mu. channel width is described. The sub-.mu. channel width is made possible by etching grooves into n$^{+}$ pn$^{[-10]}$ n$^{[-10]}$ structure and using p region at the wall for the channel region of the Metal-Oxide-Semiconductor transistor (MOST), or by diffusing two different types of impurities through the same diffusion mask and using p region at the surface for the channel region of MOST. When the drain voltage is increased at the pn$^{[-10]}$ drainjunction the depletion layer extends into the n$^{[-10]}$ region instead of into p region; this is also the secret of success to realize the sub-.mu. channel width. As the result of the experimental fabrication, a microwave MOST was obtained. The cut-off frequency was calculated to be 15.4 GHz by Linvill's power equation using the measured capacitances and transconductance.