• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2575-2577
• /
• 1999

This paper describes the engineering process for analyzing the simulation result and deciding the site in which Distribution STATCON operates more effectively. For this purpose the modeling method of industrial loads, equipments and STATCON was represented. Models of motor, furnace and so on are presented for the modeling of industrial loads. The distribution system models include the parameters of the distribution line and transformer. The models of PESS(Power Electronics Subsystem), controllers and maginetics are consist of STATCON model.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.18-20
• /
• 1995

In this paper we presented a calculation method of leakage inductance in electrical machines. For its accurate calculation the finite element method is applied to the analysis of magnetic field distribution. The self and mutual inductances are derived using the results of the magnetic field analysis and the leakage inductance is easily obtained from these inductances. As numerical examples, we tread a single phase transformer and a rotor slot model of induction motor. In the finite element analysis we used the 2D linear magnetostatic formulation with the first-order triangular element.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.422-425
• /
• 1997

This paper describes a resonant fly-back converter for high-voltage de distribution system. The proposed converter operates to change high-voltage de into low-voltage de with isolation and large converting ratio. The converter has a thyristor switch with an LC resonant circuit for commutation in the primary side of the gap transformer. The operation of the proposed system was verified through computer simulations and hardware scaled-model tests. The proposed system can be implemented with commercially available components and proven technologies.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.570-571
• /
• 2008

This paper presents a method for the determination of total transfer capability in interconnected power systems, which is based on sequential quadratic programming (SQP). The objective function is the maximization of the interconnected line flow. To calculate TTC the control variables are the active power of the generating units, the voltage magnitude of the generator, transformer tap settings and SVC setting. The state variables are the bus voltage magnitude, the reactive power of the generating unit, line flows and the tie line flow. The method proposed is applied to the modified IEEE 14 buses model system.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.886-890
• /
• 2003

This paper introduces the combined test results of the traction system for KHST(Korean High Speed Train: hereafter refer to KHST). The main purpose of this combined test is to verify the performance of the traction system that is designed to operate up to maximum 350km/h speed. Combined test system consists of a traction transformer, two AC-DC PWM converters, a PWM Inverter, two traction motors and flywheel system. Flywheel system represents equivalent model of the train inertia. Also traction control system and MASCON Interfaces are included. Various kinds of experiments are performed to prove total traction system performance and detail waveforms are described

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.196-197
• /
• 2010

This paper investigates a high performance converter topology for hydrogen gas generation electrolysis system. The proposed converter topology consists of full-bridge inverter, medium frequency transformer, and diode rectifier. Hydrogen gas generation electrolysis process considered in the paper is analyzed and characterized by its equivalent circuit. The electrolysis cell is modeled as effective resistance, capacitance, inductance, and internal emf voltage source. The proposed converter topology provides enhanced efficiency of hydrogen gas generation process under the operating condition of dc output voltage with high frequency ripple on it. The high performance operation of proposed converter is confirmed through the simulation with the electrolysis cell considered in the equivalent circuit model.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.263-264
• /
• 2010

본 논문에서는 동일한 전압, 전류 위상을 갖는 2개의 트랜스포머를 1개의 트랜스포머로 집적화하여 부피저감 효과를 갖는 IM 트랜스포머를 제안한다. 제안한 IM 트랜스포머는 하프브릿지 및 풀 브릿지 타입의 컨버터, 인버터에서 승압, 감압 및 절연을 위한 트랜스포머를 2개 이상 사용하는 경우에 하나의 트랜스포머로 집적화하여 외족 코어에서 자속을 상쇄시켜 코어부피가 저감되는 효과가 있다. 제안된 IM 트랜스포머는 이론적으로 분석하여 Gyrator model을 통해 모의실험 및 시작품 제작하여 46인치 LCD TV용 인버터에 적용하여 실험을 통해 우수성을 검증하였다.

• Current Photovoltaic Research
• /
• v.4 no.4
• /
• pp.131-139
• /
• 2016

This paper shows the series power device in the massive roof-top PVs and domestic loads. D-UPFC as the series power device controls the distribution voltage during voltage rise (or fall) condition. D-UPFC consists of the bi-directional ac-ac converter and the transformer. In order to verify the D-UPFC voltage control, the distribution model is used in the case study. D-UPFC enables the voltage control in the distribution voltage range. Dynamic voltage control from voltage rise and voltage fall conditions is performed. Scaled-down experimental test of the D-UPFC is verified the voltage control and it is well performed without high voltage spikes in the inductive load.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.179-179
• /
• 2012

Low pressure radio-frequency glow discharges are investigated using theoretical modeling and various experimental diagnostic methods. In the calculations, global models and transformer models are developed to understand the chemical kinetics as well as the electrical properties such as the effective collision frequency, the heating mechanism and the power transferred to the plasma electrons. In addition, Boltzmann equation solver is used to compensate the effect of the electron energy distribution function (EEDF) shape in the global model, and the general expression of energy balance for non-Maxwellian electrons is developed. In the experiments, a number of traditional plasma diagnostic methods are used to compare with calculated results such as Langmuir probe, optical emission spectroscopy (OES), optical absorption spectroscopy (OAS) and two-photon absorption laser-induced fluorescence (TALIF). These theoretical and experimental methods are applied to understand several interesting phenomena in low pressure ICP discharges. The chemical and physical properties of low pressure ICP discharges are described and the applications of these methods are discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1587-1595
• /
• 1996

We obtained the predicted and measured results for the reflection coefficient and radiation pattern of Ka-band (20- GHz) corrugated horn, which is usually used for feeder of reflector antenna for satellite communication, using suface impedance condition. In order to predict the reture losses of corrugated horn, we analyzed propagation constant of hybrid mode in the corrugated waveguide and then obtained the total reflection coefficient using the circuti theory of multi-step transformer. We also got the radiation pattern of corrugated horn with small flare angle, considering the phase deviation and integrate transverse field on aperture. A test model of corrugated horn antenna for Ka-band designed using theory and program displayed performance and the results agree with the theoretical prediction.