• 펄프종이기술
• /
• 제44권3호
• /
• pp.1-8
• /
• 2012

The effects of several factors including organic pigment blending and calending conditions on the surface and optical properties of coated paper were investigated. When clay and calcium carbonate are blended in the ratio of 7 to 3, highest smoothness and relative sediment volume were obtained. When organic pigments were added to the mixture of clay and calcium carbonate, the relative sediment volume did not changed significantly. However, when organic pigments were added to calcium carbonate, sheet gloss and smoothness were improved, and showed the better results than that obtained from the mixture of organic pigment and clay. When organic pigment is blended with clay, the particles of organic pigment are buried in the packing structure of coating layer. However, the particle shape of calcium carbonate is quite different from that of clay, and the aspect ratio of calcium carbonate is similar to that of organic pigment. Thus organic pigment particles are not buried and improved effectively the physical characteristics of coating layer. When the hollow sphere pigment was blended, opacity and sheet gloss were improved significantly. Even though the coating color applied was reduced, the similar level of opacity was maintained. Also, if particle size and void volume are increased, gloss is improved, because coating layer is easily transformed in calendering. Therefore, even though lower pressure was applied during calendering, the smoothness of surface of coating layer was improved, and the decrease of void volume in coating layer was reduced, and the quality of coated sheet can be improved.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.226-231
• /
• 2011

Graphene was coated on STS 316L by electro spray coating method to improve its properties of corrosion resistance and contact resistance. Exfoliated graphite (graphene) was made of the graphite by chemical treatment. Graphene is distributed using dispersing agent, and STS 316L was coated with diffuse graphene solution by electro spray coating method. The structure of the exfoliated graphite was analyzed using XRD and the coating layer of surface was analyzed by using SEM. Analysis showed that multi-layered graphite structure was destroyed and it was transformed into fine layers graphene structure. And the result of SEM analysis on the surface and the cross section, graphene layer was uniformly formed with 3~5 ${\mu}m$ thickness on the surface of substrate. Corrosion resistance test was applied in the corrosive solution which is similar to the PEM fuel cell stack inside. And interfacial contact resistance test was measured to simulate the internal operating conditions of PEM fuel cell stack. The results of measurements show that stainless steel coated with graphene was improved in corrosion resistance and surface contact resistance than stainless steel without graphene coating layer.

• Radiation Oncology Journal
• /
• 제13권1호
• /
• pp.95-100
• /
• 1995

목적 : 두경부종양 환자의 방사선치료시 두경부의 고정에 흔히 이용되는 Aquaplast가 광자선의 표면선량에 미치는 영향을 알아보기 위하여 이 실험을 시행하였다. 재료 및 방법 : 6MV X-선(Siemens Mevatron 6740)의 표면선량과 선량증가영역의 선량을 PTW Frieburg 제작의 Markus chamber와 Capintec Model WK92 Electrometer를 이용하여 측정 하였다. $25{\times}25{\times}5cm^3$ 크기 아크릴판의 중앙에 고정된 전리함을 $25{\times}25{\times}5cm^3$ 크기의 폴리스티렌 팬톰 위에 올려 놓고 표면선량을 측정한 후 적당한 두께의 폴리스티렌 팬톰판을 올려가면서 선량증가영역의 선량을 측정하였다. 1.6mm 두께의 Aquaplast(WFR Aquaplast Corp. 제작)를 원형 그대로, 그리고 실제 환자의 고정시와 비슷한 정도로 변형시킨 상태로 전리함 위에 올려 놓은 후 각각 같은 방법으로 선량을 측정하였다. 또 트레이를 장착한 후 변형된 Aquaplast가 있는 상태에서와 없는 상태에서 각각 표면선량을 측정하였다. 모든 측정은 SSD 100cm에서 시행하였으며 $5{\times}5cm^4$, $10{\times}10cm^2$, $15{\times}15cm^2$의 세 가지 크기의 조사면에 대하여 각각 측정하였다. 표면선량과 선량증가영역의 선량 백분율은 Markus chamber의 과반응을 교정하기 위하여 Gerbi와 Khan이 제시한 식을 이용하여 구하였다. 결과 : $5{\times}5cm^2$, $10{\times}10cm^2$, $15{\times}15cm^2$의 조사면에서 표면선량은 각각 $7.9\%$, $13.6\%$, $18.7\%$ 이었고 원형 그대로의 Aquaplast가 있을 경우 표면선량은 각각 $38.4\%$, $43.6\%$, $47.4\%$ 이었으며 변형된 Aquaplast가 있을 경우의 표면선량은 각각 $31.2\%$, $36.1\%$, $40.5\%$ 이었다. 최대선량점 이상의 깊이에서는 거의 비슷한 선량 백분율을 보였다. 트레이는 조사면의 크기가 증가함에 따라 Aquaplast가 없을 경우 $0.2\%$, $1.7\%$, $3.0\%$의 표면선량 증가에 기여하였으며 변형된 Aquaplast가 있을 경우 $0.2\%$, $1.9\%$, $3.7\%$의 표면선량 증가를 보였다. 결론 : Aquaplast를 사용하지 않았을 경우에 비하여 Aquaplast를 원형 그대로 사용하였을 경우 약 $30\%$, 실제 환자의 고정시와 비슷한 정도로 변형하였을 경우 약 $22\%$의 표면선랑 증가를 가져왔으며 최대선량점 깊이 이상에서의 선량 백분율에는 건의 영향을 미치지 않았다. 실제 환자에서의 Aquaplast의 사용은 피부 및 선량증가영역의 선량을 약간 증가시키지만 임상적으로 크게 문제가 되지는 않을 것으로 생각된다.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.332-337
• /
• 2002

The applicability of models based on fractal geometry to characterize the surface of the EL devices was investigated. Insulating layer and phosphor layer of EL devices were deposited on ITO glass using e-beam method. The images of phosphor layer by scanning electron microscope(SEM) were transformed to binary coded data. The relations between fractal geometry and electrical characteristics of EL devices were investigated. When the fractal dimension of $Cas:EuF_3$ EL device was 1.82 and its grain boundary area was 19%, the brightness of $Cas:EuF_3$ EL device was 261 cd/$\textrm{m}^2$.

• 품질경영학회지
• /
• 제13권1호
• /
• pp.26-30
• /
• 1985

In the light of the properties of colloids, in the surface of disperse phase and dispersion, there exist specific characters such as adsorption or electric double layer, which seems to play important roles in determining the physiochemical properties in the dyeing system. Nylon, wool and silk, the typical amphoteric fibers were dyed with Acid dye and various combinations were prepared by combining pH, temperature and dye concentration, in order to generate flowing electric potential which were measured by microviolt meter and specific conductivity meter. The results were transformed to Zeta potential by Helmholtz-Smoluchowski formular and to surface electric charge density by Suzawa formular, surface dye amount, and effective surface area of fibers, and these data were statistically analysed by principle component analysis.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.145-153
• /
• 1995

An algorithm for the automatic generation of quadrilateral shell elements on three-dimensional sculptured surfaces has been developed, which is one of the key issues in the finite element analysis of structures with complex shapes such as automobile structures. Mesh generation on sculptured surfaces is performed in three steps. First a sculptured surface is transformed to a projection plane, on which the loops are subdivided into subloops by using the best split lines, and with the use of 6-node/8-node loop operators and a layer operator, quadrilateral finite elements are constructed on this plane. Finally, the constructed mesh is transformed back to the original sculptured surfaces. The proposed mesh generation scheme is suited for the generation of non-uniform meshes so that it can be effectively used when the desired mesh density is available. Sample meshes are presented to demonstrate the versatility of the algorithm.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.244.2-244.2
• /
• 2011

We introduce a novel and robust method for the preparation of nanocomposite multilayers, which allows the excellent photoluminescent (PL) properties as well as the accurate control over the composition and dimensions of multilayers. By exchanging the oleic acid stabilizers of CdSe@ZnS quantum dots (QDs) synthesized in organic solvent with 2-bromo-2-methylpropionic acid (BMPA) in the same solvent, these nanoparticles were be alternately deposited by nucleophilic substitution reaction with highly branched poly(amidoamine) dendrimer (PAMA) through layer-by-layer (LbL) assembly process. Our approach does not need to be transformed into the water-dispersible nanoparticles with electrostatic or hydrogen-bonding groups, which can deteriorate their inherent properties, for the built-up of multilayers. The nanocomposite multilayers including QDs exhibited the strong PL properties achieving densely packed surface coverage as well as long-term PL stability under atmospheric conditions in comparison with those of conventional LbL multilayers based on electrostatic interaction. Furthermore, we demonstrate that the flexible multilayer films with optical properties can be easily prepared using nucleophilic substitution reaction between bromo and amino groups in organic media. This robust and tailored method opens a new route for the design of functional film devices based on nanocomposite multilayers.

• Applied Microscopy
• /
• 제1권1호
• /
• pp.11-17
• /
• 1969

Conidio spores of Aspergillus niger (strain No. NRRL 330) cultured on potato dextrose agar media were studied by electron microscopy, using the thin sectioning techniques. Conidio spores to be sectioned were fixed by triple methods with $K_2Cr_2O_7$, Glutaraldehyde and $OsO_4$. After dehydrated with alcohol, the specimens were embedded in metacrylate and epon resin media, and thinly sectioned by Porter-Blum MT-2. After sectioned these specimens were negative-stained with uranyl acetate and observed. by Hitachi HS-6 electron microscope. The results of this experiment were summarized as follows. 1. The structures of spore ,wall system seem to be formed 4 layers; exosporium, basal layer, spore coat and unit cell membrane. The protuberance of spore surface that was looked like hair appears to be protrusived from the basal layer. 2. The 3 layers of unit cell membrane was constituted outer layer membrane, inner layer membrane and inter-mediate light layer. 3. The structures of intra cytoplasmic membrane appear as spiral form which was consisted of 3 layers membrane system; outer membrane, inner membrane, and intermediate layer, which has pits. 4. The cement substance of spore coat and cortex may be changed quantitatively by physiological state in cell. 5. In some cases, we observed that the ribosome was transformed into poly ribosome group, and the storage materials and the protein crystals were changed variously. It. has been suggested that the morphological change of some cytoplasmic materials may be caused by some specialized function of the physiological stage.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.312-316
• /
• 1999

The interfacial structure of duplex treated AISI 4140 consisting of iron nitride and TiN layer was characterized by optical microscope, SEM and XRD. A black layer was formed from the decomposition of iron nitride during Ti ion bombardment. The black layer was characterized as an a-Fe phase transformed from the iron nitride by XRD. In order to identify the formation mechanism of the black layer, a thermal analysis of iron nitride undertaken by DSC method. As an iron nitride was mostly consisted of ${\gamma}$'-Fe$_4$N and $\varepsilon$-$Fe_3$N phase after plasma nitriding, in this study, a ${\gamma}$'$-Fe_4$N and $\varepsilon$-$Fe_3$N powders were separately prepared by the different processing conditions of gas nitriding of iron powder in the fluidized bed. From the DSC thermal analysis, the phase transformation of ${\gamma}$'$-Fe_4$N, $\varepsilon$-$Fe_3$N was followed the path of transformation; $ \Upsilon{'}-Fe_4$Nlongrightarrow${\gamma}$-Felongrightarrowa-Fe and of $\varepsilon$-$Fe_3$Nlongrightarrow$\varepsilon$-$Fe_{2.5}$ /N+${\gamma}$'$-Fe_4$Nlongrightarrow${\gamma}$'-Fe$_4$Nlongrightarrow${\gamma}$longrightarrowFelongrightarrowalongrightarrowFe, respectively. It explains the reason why the $\varepsilon$ $-Fe_3$N phase disappeared in the first time and then ${\gamma}$'-Fe$_4$N in the formation of the black layer in the duplex coating.

• 열처리공학회지
• /
• 제27권1호
• /
• pp.15-22
• /
• 2014

This study is to investigate the phase changes and cold workability after isothermal transformation at $780^{\circ}C$ by using the high temperature gas nitrided (HTGN) STS 430 ferritic stainless steel specimens. The phase diagram of STS 430 steel obtained by calculation showed that the phase appeared at $1100^{\circ}C$ showed as ${\alpha}+{\gamma}{\rightarrow}{\gamma}{\rightarrow}{\gamma}+Cr_2N{\rightarrow}{\gamma}+Cr_2N+CrN$ with increasing nitrogen concentration. Also, the transformation of ${\gamma}{\rightarrow}Cr_2N$ during heat treatment isothermally at $780^{\circ}C$, nitrogen pearlite with lamellar type was fully formed at the nitrogen permated surface layer for 10 hrs. However, this transformation was not completed for 1 hr, resulting nitrogen pearlite plus martensite. The cold rolled specimen of isothermally transformed at $780^{\circ}C$ for 10 hrs after high temperature gas nitriding decreased the layer thickness of nitrogen pearlite inducing the deformation of hard $Cr_2N$ phase. the dissolution rate of $Cr_2N$ phase increased rapidly with increasing cold rolling ratio. Specimens with the microstructure of nitrogen pearlite (isothermally transformed at $780^{\circ}C$ for 10 hrs) were possible to cold rolling without crack formation. However, the mixed structures of nitrogen pearlite + martensite (isothermally transformed at $780^{\circ}C$ for 1 hr) were impossible to cold deformation without cracking.