• 전자공학회논문지S
• /
• 제35S권3호
• /
• pp.86-92
• /
• 1998

This paper deals with an output feedback H control problem for linear time ivariant systems with state delay. The proposed output feedback controller is represented by the lower linear fractional transformation of alinear time invariant system and a delay operator. Sufficient conditions for the existence of the output feedback controller are given in the form of linear matrix inequalities which are less conservative than those for the existence of a rational output feedback controler. We also present a numerical example to demonstrate the efficacy of the proposed method.of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.865-872
• /
• 2008

Spacecraft attitude estimation using the nonlinear unscented filter is addressed to fully utilize capabilities of the unscented transformation. To release significant computational load, an efficient technique is proposed by reasonably removing correlation between random variables. This modification introduces considerable reduction of sigma points and computational burden in matrix square-root calculation for most nonlinear systems. Unscented filter technique makes use of a set of sample points to predict mean and covariance. The general QUEST(QUaternion ESTimator) algorithm preserves explicitly the quaternion normalization, whereas extended Kalman filter(EKF) implicitly obeys the constraint. For spacecraft attitude estimation based on quaternion, an approach to computing quaternion means from sampled quaternions with guarantee of the quaternion norm constraint is introduced applying a constrained optimization technique. Finally, the performance of the new approach is demonstrated using a star tracker and rate-gyro measurements.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.202-204
• /
• 2006

A new method is presented to design RF filters without the Similarity Transform of their coupling coefficient matrix as circuit parameters which is very tedious due to pivoting and deciding rotation angles needed during the iterations. The transfer function of a filter is directly used for the design and its desired form is derived by the optimized rational-function fitting technique. A 3rd order Coaxial Lowpass filter and an 8th order dual-mode elliptic integral function response filter are taken as an example to validate the proposed method.

• International Journal of Control, Automation, and Systems
• /
• 제6권2호
• /
• pp.171-179
• /
• 2008

This paper addresses the synthesis of an iterative learning controller for a class of linear systems with norm-bounded parameter uncertainties. We take into account an iterative learning algorithm with current cycle feedback in order to achieve both robust convergence and robust stability. The synthesis problem of the developed iterative learning control (ILC) system is reformulated as the ${\gamma}$-suboptimal $H_{\infty}$ control problem via the linear fractional transformation (LFT). A sufficient convergence condition of the ILC system is presented in terms of linear matrix inequalities (LMIs). Furthermore, the ILC system with fast convergence rate is constructed using a convex optimization technique with LMI constraints. The simulation results demonstrate the effectiveness of the proposed method.

• Structural Engineering and Mechanics
• /
• 제14권2호
• /
• pp.223-236
• /
• 2002

The main objective of the present paper is to address a formal procedure for orthotropic steel plates design. The theme of the proposed approach is to recast the design procedure into a mathematical programming model. The objective function to be optimized is the total weight of the structure. The total weight is function of its layout parameters and structural element design variables. Mean while the proposed approach takes into consideration the strength and rigidity criteria in addition to other dimensional constraints. A nonlinear programming model is developed which consists of a nonlinear objective function and a set of implicit/explicit nonlinear constraints. A transformation method is adopted for minimization strategy, where the primal model constrained problem is transformed into a sequence of unconstrained minimization models. The search strategy is based on the well-known Fletcher/Powell algorithm. The finite element technique is adopted for discretization and analysis strategies. Mindlin theory is selected to simulate the finite element model and a selective reduced integration scheme is exploited to avoid a shear lock problem.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.15-23
• /
• 2008

This paper considers the problem of delay-dependent guaranteed cost controller design for uncertain neutral systems with distributed delays. The system under consideration is subject to norm-bounded time-varying parametric uncertainty appearing in all the matrices of the state-space model. By constructing appropriate Lyapunov functionals and using matrix inequality techniques, a state feedback controller is designed such that the resulting closed-loop system is not only robustly stable but also guarantees an adequate level of performance for all admissible uncertainties. Furthermore, a convex optimization problem is introduced to minimize a specified cost bound. By matrix transformation techniques, the corresponding optimal guaranteed controller can be obtained by solving a linear matrix inequality. Finally, a simulation example is presented to demonstrate the effectiveness of the proposed approach.

• Structural Engineering and Mechanics
• /
• 제33권3호
• /
• pp.339-355
• /
• 2009

The sealed, tuned liquid column gas damper (TLCGD) with gas-spring effect extends the frequency range of application up to about 5 Hz and efficiently increases the modal structural damping. In this paper the influence of several TLCGDs to reduce coupled translational and rotational vibrations of plan-asymmetric buildings under wind or seismic loads is investigated. The locations of the modal centers of velocity of rigidly assumed floors are crucial to select the design and the optimal position of the liquid absorbers. TLCGD's dynamics can be derived in detail using the extended non-stationary Bernoulli's equation for moving reference systems. Modal tuning of the TLCGD renders the optimal parameters by means of a geometrical transformation and in analogy to the classical tuned mass damper (TMD). Subsequently, fine-tuning is conveniently performed in the state space domain. Numerical simulations illustrate a significant reduction of the vibrations of plan-asymmetric buildings by the proposed TLCGDs.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권8호
• /
• pp.972-979
• /
• 1999

QFT(Quantitative Feedback Theory) is a very practical design technique that emphasizes the use of feedback for achieving the desired system performance tolerances in despite of plant uncertainty and disturbance. The fundamental concept of QFT is a loop shaping procedure that a suitable controller can be found by shaping a nominal loop transfer function. The loop shaping synthesis involves the identification of a structure and the specialization of parameter optimization of a desired system. This paper presents an improved loop shaping approach of QFT with model validation using GA(Genetic Algorithm). The method presented in this paper removes the problems of iterative operation, transformation error, and model validation in the conventional methods without consideration of frequency domain.

• 대한조선학회지
• /
• 제24권2호
• /
• pp.20-28
• /
• 1987

In general, preliminary hull form design is performed by changing a parent hull form using a computer to satisfy given requirements, e.g., principal dimensions, displacement, $L_{CB}$, and etc. Principal dimensions, $C_b,\;L_{CB}$ and midship sections are the only parameters to be modified in the traditional hull form variation methods available for preliminary design. In this paper, a method is presented in which local cross sections as well as principal dimensions and midship sections are modified according to design requirements. The method gives hydrostatic curves of modified hull form simultaneously. An optimization technique to satisfy the constraints of hydrostatic characteristics such as maximizing KM as a design requirement is also considered.

• 대한임베디드공학회논문지
• /
• 제18권6호
• /
• pp.293-301
• /
• 2023

With the advancement of artificial intelligence and its various use cases, accessing it through edge computing environments is gaining traction. However, due to the nature of edge computing environments, efficient management and optimization of clusters distributed in different geographical locations is considered a major challenge. To address these issues, this paper proposes a centralization and automation tool called KubEVC-Agent based on Kubernetes. KubEVC-Agent centralizes the deployment, operation, and management of edge clusters and presents a use case of the data transformation for optimizing intra-cluster communication. This paper describes the components of KubEVC-Agent, its working principle, and experimental results to verify its effectiveness.