• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.411-414
• /
• 2005

It is reported that $\varepsilon$ (HCP) and $\gamma$ (FCC) phases of a Fe-17Mn alloy transform to $\alpha'$ phase, which has BCC structure, under a deformation condition. In this study, we investigated the effect of strain-induced-transformed $\alpha'$ phase on sliding wear of the Fe-17Mn alloy that originally had e and y phases. Wear tests of the materials were carried out using a pin-on-disk wear tester at various loads of 0.5N-50N under a constant sliding speed condition of 0.38m/s against glass $(83\%\;SiO_2)$ beads. The sliding distance and radius were loom and 9 mm, respectively. Wear rate of the Fe-17Mn alloy was calculated by dividing the weight loss, measured to the accuracy of $10^{-5}g$ by the measured specific gravity and sliding distance. Worn surface and wear debris of the specimens were examined using an SEM and XRD. During the wear, $\alpha'$ phase of BCC structure was formed by strain-induced transformation when the applied wear load exceeded critical values. The $\alpha'$ phase formed by the strain induced transformation increased the wear rate of the Fe-17Mn alloy.

• The Korean Journal of Applied Statistics
• /
• v.31 no.6
• /
• pp.707-719
• /
• 2018

Various time series representation methods have been proposed for efficient time series clustering and classification. Lin et al. (DMKD, 15, 107-144, 2007) proposed a symbolic aggregate approximation (SAX) method based on symbolic representations after approximating the original time series using piecewise local mean. The performance of SAX therefore depends heavily on how well the piecewise local averages approximate original time series features. SAX equally divides the entire series into an arbitrary number of segments; however, it is not sufficient to capture key features from complex, large-scale time series data. Therefore, this paper considers data-adaptive local constant approximation of the time series using the unbalanced Haar wavelet transformation. The proposed method is shown to outperforms SAX in many real-world data applications.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.279-289
• /
• 2021

GNSS receivers capable of tracking multiple Global Navigation Systems (GNSSs) simultaneously are widely used. In order to estimate accurate user position and velocity, it is necessary to consider the key elements that contribute to the interoperability of the different GNSSs. Typical examples are the time system and the coordinate system. Each GNSS is operated based on its own reference time system depending on when the system was developed and whether the leap seconds are applied. In addition, each GNSS is designed based on its own coordinate system based on earth model constant values. This paper addresses the interoperability issues from the viewpoint of Single Point Positioning (SPP) users utilizing multiple GNSS signals from GPS, GLONASS, BeiDou, and Galileo. Since the broadcast ephemerides of each GNSS are based on their own time and coordinate systems, the time and the coordinate systems should be unified for any user algorithm. For this purpose, this paper proposes a method of converting each GNSS coordinate system into the reference coordinate system through Helmert transformation. The error of the broadcast ephemerides was calculated with the precise ephemerides provided by the International GNSS Service (IGS). The effectiveness of the proposed multi-GNSS correction and transformation method is verified using the Multi-GNSS Experiment (MGEX) station data.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.396-403
• /
• 1991

A solution is presented for the computation of the elastic-creep stresses in a hollow cylinder subjected to nonaxisymmetric temperature distribution. The creep problem is treated by the Maxwell creep model. Laplace transformation is used for reformation of the governing equation of elastic problem and Hooke's law in a function of .gamma. , .theta. , and creep constant. The governing equation is set up using the Airy stress function which leads to the biharmonic equation. The solution is obtained by using Fourer series method and Laplace inverse method used to obtain the stress components which include the variation of time. This solution shows excellent agreement with Lamkin's and Boley & Weiner's solution. The viscoelastic stresses are also obtained for the fuel rob tube subjecting nonaxisymmetric thermal load.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.524-530
• /
• 2007

This paper presents a new and simple method for sensorless operation of matrix converter drives using a constant air-gap flux and the imaginary power flowing to the motor. To improve low-speed sensorless performance, the non-linearities of a matrix converter drive such as commutation delays, turn-on and turn-off times of switching devices, and on-state switching device voltage drop are modelled using PQR transformation and compensated using a reference power control scheme. The proposed compensation method is applied for high performance induction motor drives using a 3 kW matrix converter system. Experimental results are shown to illustrate the feasibility of the proposed strategy.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.6
• /
• pp.380-386
• /
• 2000

This paper presents the mathematical modelling analysis of Brushless Synchronous Motor(BLSM). The dynamic and the steady state characteristics of BLSM are simulated and analyzed : electromagnetic torque, speed, line voltage, and current. We used mathematical modelling to model of BLSM with sinusoidal back EMF, namely the shaft transformation referencing rotor frame from a, b, c three to produce constant torque like synchronous motor. The experiment result has already similar to compare with simulation result : torque error about 7%, speed error about 5%. The validity of proposed modelling and analysis was confirmed by the experimental result.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.583-586
• /
• 2013

We consider discrete-time LTI (Linear Time-Invariant) systems with constant input delays. The input delay is modeled by a first-order PdE (Partial difference Equation) and a backstepping transformation is employed to design a predictor feedback controller. The backstepping approach results in the construction of an explicit Lyapunov function, with which we prove the exponential stability of the closed-loop system formed by the predictor feedback. The numerical example demonstrates the design of the predictor feedback controller, and illustrates the validity of the exponential stability.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.49-52
• /
• 2005

In this study, abiotic transformation of 1-naphthol via oxidative-coupling reaction was evaluated using Mn oxide which is ubiquitous in natural soils. The transformation of 1-naphthol catalyzed by synthetic birnessite $({\delta}-MnO_2)$ followed pseudo-lst order reaction, and the rate constants was in the range of $0.053{\sim}0.13\;min^{-1}$ with birnessite loadings of $12.5{\sim}50\;mg/20\;mL$. Since the oxidation of 1-naphthol was occurred on the reactive surface of the oxide particles, the rate constants with various birnessite loadings were correlated with birnessite surface area concentration. The correlation showed a strong linearity, which confirms the supposition of the surface reaction. From the correlation, therefore, the surface area normalized rate constant, $k_{surf}$, was determined to be 0.032 $L/m^2\;min$.

• Journal of Plant Biology
• /
• v.28 no.4
• /
• pp.305-315
• /
• 1985

Morphological variations within the species of Scenedesmus in Korea, S. armatus and 2 strains of S. quadricauda were investigated. Taxonomic characters such as length of long spine, ridge, unicell-colony transformation, and colony types were compared. The length of long spine was constant, whereas the distribution of the spine varied with the age of culture. Ridge and short spine in S. armatus occurred constantly, whereas those in S. quadricauda varied with the composition of the media and age of culture. Strains CY-1 and CY-2 showed 6 different colony types in the stationary culture, whereas S. armatus formed only two types, armatus and armatus-longus types. All strains showed unicell-colony transformation. The cell became minimum when the daughter cell was released, and reached maximum at division.

• Communications of the Korean Mathematical Society
• /
• v.36 no.4
• /
• pp.817-827
• /
• 2021

In this paper, we prove that a diffeomorphism f on a normal almost contact 3-manifold M is a CRL-transformation if and only if M is an α-Sasakian manifold. Moreover, we show that a CR-loxodrome in an α-Sasakian 3-manifold is a pseudo-Hermitian magnetic curve with a strength $q={\tilde{r}}{\eta}({\gamma}^{\prime})=(r+{\alpha}-t){\eta}({\gamma}^{\prime})$ for constant 𝜂(𝛄'). A non-geodesic CR-loxodrome is a non-Legendre slant helix. Next, we prove that let M be an α-Sasakian 3-manifold such that (∇_YS)X = 0 for vector fields Y to be orthogonal to ξ, then the Ricci tensor 𝜌 satisfies 𝜌 = 2α²g. Moreover, using the CRL-transformation $\tilde{\nabla}^t$ we fine the pseudo-Hermitian curvature $\tilde{R}$, the pseudo-Ricci tensor $\tilde{\rho}$ and the torsion tensor field $\tilde{T}^t(\tilde{S}X,Y)$.