• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.416-423
• /
• 2009

Statement of problem: The degree of light attenuation at the time of cementation of the PLV restoration depends on characteristics such as thickness, opacity and shade of the restorations, which interfere with light transmittance and, as a result, may decrease the total energy reaching the luting cement. Purpose: The purpose of this study was to compare the degree of conversion of light-cured resin cements measuring by FT-IR in regard to different thickness, light devices and curing time. Material and methods: In the control group, a clear slide glass (1.0 mm) was positioned between the light cured resin cement and light source. The specimens of ceramics were made with IPS Empress Esthetic. The ceramics were fabricated with varying thicknesses-0.5, 1.0, 1.5 mm with shade ETC1. Rely $X^{TM}$ Veneer with shade A3, light-cured resin cement, was used. Light-activation was conducted through the ceramic using a quartz tungsten halogen curing unit, a light emitting diode curing unit and a plasma arc curing unit. The degree of conversion of the light-cured resin cement was evaluated using FT-IR and OMNIC. One-way ANOVA and Tukey HSD test were used for statistical analysis ($\alpha$< .05). Results: The degree of conversion (DC) of photopolymerization using QTH and LED was higher than results of using PAC in the control group. After polymerization using QTH and LED, the DC results from the different ceramic thickness- 0.5 mm, 1.0 mm, 1.5 mm- did not show a significant difference when compared with those of control group. However, the DC for polymerization using PAC in the 1.5mm ceramic group showed significantly lower DC than those of the control group and 0.5 mm ceramic group (P<.05). At 80s and 160s, the DC of light-cured resin cement beneath 1.0 mm ceramic using LED was significantly higher than at 20s (P<.05). Conclusion: Within the limitation of this study, when adhering PLV to porcelain with a thickness between 0.5-1.5 mm, the use of PAC curing units were not considered however, light cured resin cements were effective when cured for over 40 seconds with QTH or LED curing units. Also, when curing the light cured resin cements with LED, the degree of polymerization was not proportional with the curing time. Curing exceeding a certain curing time, did not significantly affect the degree of polymerization.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.609-614
• /
• 2013

This study investigated the spontaneous combustion behavior of solvent-treated low rank coals. Indonesian lignite (a KBB and SM coal) and sub-bituminous (a Roto coal) were mixed with non-polar 1-methyl naphthalene (1MN) either by mechanical agitation or ultrasonication. The property change associated with 1MN treatment was then analyzed using proximate analysis, calorific value analysis, Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy and moisture re-adsorption test. Susceptibility to spontaneous combustion was evaluated using crossingpoint temperature (CPT) measurement along with gas analysis by GC. A FT-IR profile showed that oxygen functional groups and C-H bonding became weaker when treated by 1 MN. XPS results also indicated a decrease of the oxygen groups (C-O-, C=O and COO-). Increased hydrophobicity was found in the 1MN treated coals during moisture readsorption test. A CPT of the treated coals was ${\sim}20^{\circ}C$ higher than that of the corresponding raw coals and the ultrasonication was more effective way to enhance the stability against spontaneous combustion than the agitation. In the gas analysis less CO and $CO_2$ were emitted from 1MN treated coals, also indicating inhibition of pyrophoric behavior. The surface functional groups participating in the oxidation reaction seemed to be removed by the ultrasonication more effectively than by the simple mechanical agitation.

• Journal of the Korean Geographical Society
• /
• v.31 no.1
• /
• pp.1-18
• /
• 1996

This study examines the spatial characteristics of postal office patronage in rural areas. in the light of future possible relocation and closures of the postal facilities. Most of private services have flown out small rural central places due to the decrease of supporting population, and there consequently remain only a few public services including government-run post offices at the Myon seats, the lowest level among rural central places in Korea. The small local population and its further decline undermine the rationale for maintaining such public services in depleted rural areas. For the worse of it, the government recently plans to transform the postal system to a quasi-private, corporational structure. One can fear that the profit-seeking nature of the new postal corporation will inevitably force to close many of such small rural facilities. The study first analysed nation-wide censuses of postal offices for the years of 1986 and 1992. The postal services examined are per capita number of postal stamps and revenue stamps sold, and letters, parcels, telegrams and monetary transactions handled at the post offices. It is found that, while the usage of postal services has increased substantially throughout the nation during the period of 1986-1992, the increment has largely been occurred by urban post offices rather than by those in Gun seats (i.e., rural counties); and that the gap of the service levels between urban and rural post offices is ever widening. The study further examined the service differentials among the post offices within rural counties to find that those post offices adjacent to the county (Gun) seats and larger urban centers rendered less amount of services than remote rural post offices, indicating that rural residents tend to partonize larger centers more and more than local Myon seats. At the second stage of the study, questionnaire surveys were conducted in Muju, Kimpo, and Hongsung-Gun's. These three counties are meant to represent respectively the remote, suburban, and intermediary counties in Korea. The analyses of survey data reveal that the postal hinterlands of the county seats extend to much of nearby Myons, the subdivisions of a Gun. It is also found that the extent of postal hinterlands of the three counties and the magnitude of patronage and quite different from each other depending upon the topography, population density, and the propinquity of the counties to metropolitan centers. The findings suggest to reappraise the current flat allocation scheme of public facilites to each of rural subdivisions throughout the nation. A detailed analysis on the travel behavior of the survey respondents yields that age is the most salient variable to distinguish activity spaces of rural residents. The activity spaces of older respondents tend to be more limited within their Myon, whereas those of younger respondents extend across the Myon boundary, toward the central towns and even distant larger cities. The very existence of several activity spaces in rural areas calls for an attention in the future locational decisions of public facilities. The locational criteria, employed by the Ministry of Communication of Korean government to establish a post office, are the size of hinterland population and the distance from adjacent postal facilities. The present study findings suggest two additional criteria: the order in rural central place hierarchy and the propinquity to the upper-level centers of the central hierarchy. These old and new criteria are complementary each other in that the former criteria are employed to determine new office locations, whereas the latter are appropriate to determine facility relocation and closures.

• Analytical Science and Technology
• /
• v.25 no.2
• /
• pp.121-126
• /
• 2012

It is essential to evaluate the quality of Hanji record paper without damaging the record paper by previous destructive methods. The samples were Hanji record paper produced in the 1900s. Near-infrared (NIR) spectrometer was used as a non destructive method for evaluating the quality of record papers. Fourier transform (FT) spectrometer was used with 12,500 to 4,000 $cm^{-1}$ wavenumber range for quantitative analysis and it has high accuracy and good signal-to-noise ratio. The acidity and moisture content of Hanji record paper were measured by integrating sphere as diffuse reflectance type. The acidity (pH) of chemical factors as a quality evaluated factor of Hanji was correlated to NIR spectrum. The NIR spectrum was pretreated to obtain the coefficients of optimum correlation. Multiplicative scatter correction (MSC) and First derivative of Savitzky-Golay were used as pretreated methods. The coefficients of optimum correlation were calculated by PLSR (partial least square regression). The correlation coefficients ($R^2$) of acidity had 0.92 on NIR spectra without pretreatment. Also the standard error of prediction (SEP) of pH was 0.24. And then the NIR spectra with pretreatment would have better correlation coefficient ($R^2$ = 0.98) and 0.19 as SEP on pH. For moisture contents, the linearity correlation without pretreatment was higher than the case with pretreatment (MSC, $1^{st}$ derivative). As the best result, the $R^2$ was 0.99 and SEP was 0.45. This indicates that it is highly proper to evaluate the quality of Hanji record papers speedily with integrated sphere and FT NIR analyzer as a non-destructive method.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.39-54
• /
• 2013

Recent explosive increase of electronic commerce provides many advantageous purchase opportunities to customers. In this situation, customers who do not have enough knowledge about their purchases, may accept product recommendations. Product recommender systems automatically reflect user's preference and provide recommendation list to the users. Thus, product recommender system in online shopping store has been known as one of the most popular tools for one-to-one marketing. However, recommender systems which do not properly reflect user's preference cause user's disappointment and waste of time. In this study, we propose a novel recommender system which uses data mining and multi-model ensemble techniques to enhance the recommendation performance through reflecting the precise user's preference. The research data is collected from the real-world online shopping store, which deals products from famous art galleries and museums in Korea. The data initially contain 5759 transaction data, but finally remain 3167 transaction data after deletion of null data. In this study, we transform the categorical variables into dummy variables and exclude outlier data. The proposed model consists of two steps. The first step predicts customers who have high likelihood to purchase products in the online shopping store. In this step, we first use logistic regression, decision trees, and artificial neural networks to predict customers who have high likelihood to purchase products in each product group. We perform above data mining techniques using SAS E-Miner software. In this study, we partition datasets into two sets as modeling and validation sets for the logistic regression and decision trees. We also partition datasets into three sets as training, test, and validation sets for the artificial neural network model. The validation dataset is equal for the all experiments. Then we composite the results of each predictor using the multi-model ensemble techniques such as bagging and bumping. Bagging is the abbreviation of "Bootstrap Aggregation" and it composite outputs from several machine learning techniques for raising the performance and stability of prediction or classification. This technique is special form of the averaging method. Bumping is the abbreviation of "Bootstrap Umbrella of Model Parameter," and it only considers the model which has the lowest error value. The results show that bumping outperforms bagging and the other predictors except for "Poster" product group. For the "Poster" product group, artificial neural network model performs better than the other models. In the second step, we use the market basket analysis to extract association rules for co-purchased products. We can extract thirty one association rules according to values of Lift, Support, and Confidence measure. We set the minimum transaction frequency to support associations as 5%, maximum number of items in an association as 4, and minimum confidence for rule generation as 10%. This study also excludes the extracted association rules below 1 of lift value. We finally get fifteen association rules by excluding duplicate rules. Among the fifteen association rules, eleven rules contain association between products in "Office Supplies" product group, one rules include the association between "Office Supplies" and "Fashion" product groups, and other three rules contain association between "Office Supplies" and "Home Decoration" product groups. Finally, the proposed product recommender systems provides list of recommendations to the proper customers. We test the usability of the proposed system by using prototype and real-world transaction and profile data. For this end, we construct the prototype system by using the ASP, Java Script and Microsoft Access. In addition, we survey about user satisfaction for the recommended product list from the proposed system and the randomly selected product lists. The participants for the survey are 173 persons who use MSN Messenger, Daum Caf$\acute{e}$, and P2P services. We evaluate the user satisfaction using five-scale Likert measure. This study also performs "Paired Sample T-test" for the results of the survey. The results show that the proposed model outperforms the random selection model with 1% statistical significance level. It means that the users satisfied the recommended product list significantly. The results also show that the proposed system may be useful in real-world online shopping store.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.4
• /
• pp.844-852
• /
• 2006

This study was to evaluate the effect of Yeongyupaedog-san (YGPDS) on mouse Thl and Th2 cells' differentiation and ovalbumin (OVA)-induced allergic inflammation. The proliferation of mouse CD4 T cells and the secretion of Th1/Th2 cytokines under the influence of YGPDS extract were measured as well as the amount of ${\beta}-hexosaminidase$ in RBL-2H3 cells and the levels of $TNF-{\alpha}$ and 1L-6 secretion in Raw264.7 cells. BALB/c mice were orally administered with YGPDS extract and simultaneously inoculated with OVA to induce allergic reaction and measure the level of total IgE, OVA-specific IgE and the production of IFN- g, IL-4, IL-5 by the spleen cells. When mouse CD4 T cell were stimulated with anti-CD3 and anti-CD28 for 48 hours in various concentrations of YGPDS extract, it increased proliferation of CD4 cells by 11% in $100\;{\mu}g/^{ml}$ concentration but it showed an inhibition by 37% at $200\;{\mu}g/^{ml}$ CD4 T cells under Th1/Th2 polarizing conditions for 3 days with YGPDS resulted in mild decrease of IFN- g in Thl cells and significant decrease of IL-4 in Th2 cells at $500\;{\mu}g/^{ml}\;and\;100\;{\mu}g/^{ml}$ by 18% and 21%, respectively. YGPDS extract had a dose-dependent inhibitory effect on antigen-induced release of ${\beta}-hexosaminidase$ in RBL-2H3 cells. Treatment of YGPDS extract on LPS stimulated Raw 264.7 cells showed dose-dependent decrease in TNF-n production. Oral administration of YGPDS extract on OVA-induced allergic mice showed an inhibitory effect on the levels of total serum IgE and OVA-specific IgE by 25% and 34% , respectively. Culture of spleen cells with OVA resulted in significant increase of IFN- g by 44% and significant decrease of IL-4 and IL-5 by 56%, and 24%, respectively. The results show that YGPDS does not strongly induce mouse T cells to transform into Thl or Th2 but it has an anti-allergic effect in vitro, and that it also corrects the unbalance between the reactions of Th cells in allergic diseases.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.6
• /
• pp.1467-1476
• /
• 2006

This study was to evaluate the effect of Bulhwangeumjeonggi-san (BS) on mouse Th1 and Th2 cells' differentiation and ovalbumin (OVA)-induced allergic inflammation. The proliferation of mouse CD4 T cells and the secretion of Th1/Th2 cytokines under the influence of BS extract were measured as well as the amount ${\beta}$-hexosaminidase in RBL-wH3 cells and the levels of TNF-${\alpha}$ and IL-6 secretion in Raw264.7 cells. BALB/c mice were orally administered with BS extract and simultaneously inoculated with OVA to induce allergic reaction and measure the level of total lgE, OVA-specific lgE and the production of IFN- g, IL-4, IL-5 by the spleen cells. When mouse CD4- T cell were stimulated with anti-CD3 and anti-CD28 for 48 hours in various concentrations of BS extract, it increased proliferation of CD4 cells by 14% in 50 ${\mu}g/m{\ell}$ concentration but it showed an inhibition in higher concentrations. CD4 T cells under Th1/Th2 polarizing conditions for 3 days with BS resulted in mild decrease of IFN- g in Th1 cells and mild increase of IL-4 in Th2 cell at 50 ${\mu}g/m{\ell}$ but the level of IL-4 decreased by 18% at 100 ${\mu}g/m{\ell}$. BS extract had a dose-dependent inhibitory effect on antigen-induced release of ${\beta}$-hexosaminidase in RBL-2H3 cells. Treatment of BS extract on LPS stimulated Raw 264.7 cells showed dose-dependent decrease in TNF-${\alpha}$ production. Oral administration of BS extract on OVA-induced allergic mice showed an inhibitory effect on the levels of total serum lgE and OVA-specific lgE by 50% and 55%, respectively. Culture of spleen cells with OVA resulted in significant increase of IFN- g by 25% and significant decrease of IL-4 and IL-5 by 53%, and 38%, respectively. The results show that BS does not strongly induce mouse T cells to transform into Th1 or Th2 but it has an anti-allergic effect in vitro, and that it also corrects the unbalance between the reactions of Th cells in allergic diseases.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.177-200
• /
• 2009

AIn the advanced - economy, the services industry hasbecome a dominant sector. Evidently, the services sector has grown at a much faster rate than any other. For instance, in such developed countries as the U.S., the proportion of the services sector in its GDP is greater than 75%. Even in the developing countries including India and China, the magnitude of the services sector in their GDPs is rapidly growing. The increasing dependence on service gives rise to new initiatives including service science and service-dominant logic. These new initiatives propose a new theoretical prism to promote the better understanding of the changing economic structure. From the new perspectives, service is no longer regarded as a transaction or exchange, but rather co-creation of value through the interaction among service users, providers, and other stakeholders including partners, external environments, and customer communities. The purpose of this study is the following. First, we review previous literature on service, service innovation, and service systems and integrate the studies based on service dominant logic. Second, we categorize the ten propositions of service dominant logic into conceptual propositions and the ones that are directly related to service provision. Conceptual propositions are left out to form the research model. With the selected propositions, we define the research constructs for this study. Third, we develop measurement items for the new service concepts including service provider network, customer network, value co-creation, and convergence of service with product. We then propose a research model to explain the relationship among the factors that affect the value creation mechanism. Finally, we empirically investigate the effects of the factors on firm performance. Through the process of this research study, we want to show the value creation mechanism of service systems in which various participants in service provision interact with related parties in a joint effort to create values. To test the proposed hypotheses, we developed measurement items and distributed survey questionnaires to domestic companies. 500 survey questionnaires were distributed and 180 were returned among which 171 were usable. The results of the empirical test can be summarized as the following. First, service providers' network which is to help offer required services to customers is found to affect customer network, while it does not have a significant effect on value co-creation and product-service convergence. Second, customer network, on the other hand, appears to influence both value co-creation and product-service convergence. Third, value co-creation accomplished through the collaboration of service providers and customers is found to have a significant effect on both product-service convergence and firm performance. Finally, product-service convergence appears to affect firm performance. To interpret the results from the value creation mechanism perspective, service provider network well established to support customer network is found to have significant effect on customer network which in turn facilitates value co-creation in service provision and product-service convergence to lead to greater firm performance. The results have some enlightening implications for practitioners. If companies want to transform themselves into service-centered business enterprises, they have to consider the four factors suggested in this study: service provider network, customer network, value co-creation, and product-service convergence. That is, companies becoming a service-oriented organization need to understand what the four factors are and how the factors interact with one another in their business context. They then may want to devise a better tool to analyze the value creation mechanism and apply the four factors to their own environment. This research study contributes to the literature in following ways. First, this study is one of the very first empirical studies on the service dominant logic as it has categorized the fundamental propositions into conceptual and empirically testable ones and tested the proposed hypotheses against the data collected through the survey method. Most of the propositions are found to work as Vargo and Lusch have suggested. Second, by providing a testable set of relationships among the research variables, this study may provide policy makers and decision makers with some theoretical grounds for their decision making on what to do with service innovation and management. Finally, this study incorporates the concepts of value co-creation through the interaction between customers and service providers into the proposed research model and empirically tests the validity of the concepts. The results of this study will help establish a value creation mechanism in the service-based economy, which can be used to develop and implement new service provision.

• Korean Journal of Social Welfare Studies
• /
• v.44 no.3
• /
• pp.177-206
• /
• 2013

The Korean government has implemented the senior employment policy as a direct job creation policy since 2004. A realistic discussion of policy alternatives and orientation for this has been given little attention even though senior employment policy has been carried out for the last 10 years and it will be expanded next year. This study tries to examine active labor market policy especially focusing on direct job creation programs and policies for the disadvantaged low-income elderly in OECD countries, and then it suggests some developmental alternatives for senior employment policy based on the study's results. The main results from this analysis are summarized in two points. Firstly, except pension policies, employment policy for older workers in the OECD countries is highly proportional to the tackling of objective factors reducing the demand for older workers (wage subsidies, reduced social security contribution rate etc). And the strategies of improving employability have not been relatively important and direct job creation policy has been marginal. Secondly, employment support policies for the low-income elderly can be divided into three types: support for the low-income elderly, alleviating early retirement and support for full employment according to the criteria which are determined by policy objectives and the social economic index. Korea's employment support policies belong to the type of direct job creation among them. This seems to be due to the fact that the rate of elderly poverty is extremely high and an income security system has not been developed in Korea. However, the policy objective is still uncertain. Therefore, this policy needs to set up clear objectives and establish a proper system for the achievement of its goals. If we focus on the strength of its employment characteristics, we need to modify the policy's plan in the perspective of labor market policy. But if we intend to keep both of the current objectives, it is better for this policy to be divided into two parts: social participation and income supplements. Or it also may be a solution to transform the system into an employment service, a training system which supports participants to move into unsubsidized jobs such as SCSEP in the U. S.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.60-61
• /
• 2003

A new approach to reduce the computation time of genetic algorithm (GA) for making binary phase holograms is described. Synthesized holograms having diffraction efficiency of 75.8% and uniformity of 5.8% are proven in computer simulation and experimentally demonstrated. Recently, computer-generated holograms (CGHs) having high diffraction efficiency and flexibility of design have been widely developed in many applications such as optical information processing, optical computing, optical interconnection, etc. Among proposed optimization methods, GA has become popular due to its capability of reaching nearly global. However, there exits a drawback to consider when we use the genetic algorithm. It is the large amount of computation time to construct desired holograms. One of the major reasons that the GA' s operation may be time intensive results from the expense of computing the cost function that must Fourier transform the parameters encoded on the hologram into the fitness value. In trying to remedy this drawback, Artificial Neural Network (ANN) has been put forward, allowing CGHs to be created easily and quickly (1), but the quality of reconstructed images is not high enough to use in applications of high preciseness. For that, we are in attempt to find a new approach of combiningthe good properties and performance of both the GA and ANN to make CGHs of high diffraction efficiency in a short time. The optimization of CGH using the genetic algorithm is merely a process of iteration, including selection, crossover, and mutation operators [2]. It is worth noting that the evaluation of the cost function with the aim of selecting better holograms plays an important role in the implementation of the GA. However, this evaluation process wastes much time for Fourier transforming the encoded parameters on the hologram into the value to be solved. Depending on the speed of computer, this process can even last up to ten minutes. It will be more effective if instead of merely generating random holograms in the initial process, a set of approximately desired holograms is employed. By doing so, the initial population will contain less trial holograms equivalent to the reduction of the computation time of GA's. Accordingly, a hybrid algorithm that utilizes a trained neural network to initiate the GA's procedure is proposed. Consequently, the initial population contains less random holograms and is compensated by approximately desired holograms. Figure 1 is the flowchart of the hybrid algorithm in comparison with the classical GA. The procedure of synthesizing a hologram on computer is divided into two steps. First the simulation of holograms based on ANN method [1] to acquire approximately desired holograms is carried. With a teaching data set of 9 characters obtained from the classical GA, the number of layer is 3, the number of hidden node is 100, learning rate is 0.3, and momentum is 0.5, the artificial neural network trained enables us to attain the approximately desired holograms, which are fairly good agreement with what we suggested in the theory. The second step, effect of several parameters on the operation of the hybrid algorithm is investigated. In principle, the operation of the hybrid algorithm and GA are the same except the modification of the initial step. Hence, the verified results in Ref [2] of the parameters such as the probability of crossover and mutation, the tournament size, and the crossover block size are remained unchanged, beside of the reduced population size. The reconstructed image of 76.4% diffraction efficiency and 5.4% uniformity is achieved when the population size is 30, the iteration number is 2000, the probability of crossover is 0.75, and the probability of mutation is 0.001. A comparison between the hybrid algorithm and GA in term of diffraction efficiency and computation time is also evaluated as shown in Fig. 2. With a 66.7% reduction in computation time and a 2% increase in diffraction efficiency compared to the GA method, the hybrid algorithm demonstrates its efficient performance. In the optical experiment, the phase holograms were displayed on a programmable phase modulator (model XGA). Figures 3 are pictures of diffracted patterns of the letter "0" from the holograms generated using the hybrid algorithm. Diffraction efficiency of 75.8% and uniformity of 5.8% are measured. We see that the simulation and experiment results are fairly good agreement with each other. In this paper, Genetic Algorithm and Neural Network have been successfully combined in designing CGHs. This method gives a significant reduction in computation time compared to the GA method while still allowing holograms of high diffraction efficiency and uniformity to be achieved. This work was supported by No.mOl-2001-000-00324-0 (2002)) from the Korea Science & Engineering Foundation.