• Clean Technology
• /
• v.26 no.2
• /
• pp.102-108
• /
• 2020

In recent years, packed column has been widely used in separation processes, such as absorption, desorption, distillation, and extraction, in the petrochemical, fine chemistry, and environmental industries. Packed column is used as a contacting facility for gas-liquid and liquid-liquid systems filled with random packed materials in the column. Packed column has various advantages such as low pressure drop, economical efficiency, thermally sensitive liquids, easy repairing restoration, and noxious gas treatment. The performance of a packed column is highly dependent on the maintenance of good gas and liquid distribution throughout a packed bed; thus, this is an important consideration in a design of packed column. In this study, hydraulic pressure drop, hold-up as a function of liquid load, and mass transfer in the air, air/water, and air-NH₃/water systems were studied to find the geometrical characteristic for raschig super-ring experiment dry pressure drop. Based on the results, design factors and operating conditions to handle noxious gases were obtained. The dry pressure drop of the random packing raschig super-ring was linearly increased as a function of gas capacity factor with various liquid loads in the Air/Water system. This result is lower than that of 35 mm Pall-ring, which is most commonly used in the industrial field. Also, it can be found that the hydraulic pressure drop of raschig super-ring is consistently increased by gas capacity factor with various liquid loads. When gas capacity factor with various liquid loads is increased from 1.855 to 2.323 kg^-1/2 m^-1/2 S^-1, hydraulic pressure drop increases around 17%. Finally, the liquid hold-up related to packing volume, which is a parameter of specific liquid load depending on gas capacity factor, shows consistent increase by around 3.84 kg^-1/2 m^-1/2 S^-1 of the gas capacity factor. However, liquid hold-up significantly increases above it.

• Reproductive and Developmental Biology
• /
• v.35 no.3
• /
• pp.319-327
• /
• 2011

This study investigated whether the addition of porcine sperm cytosolic factor (SCF) at fusion/activation affects in vitro development of porcine parthenogenetic(PA) and nuclear transfer (NT) embryos. To determine the optimum concentration of SCF, control group of oocytes was activated with 0.3M mannitol (1.0 mM $CaCl_2{\cdot}2H_2O$), other three groups of oocytes were parthenogentically activated with the fusion medium (0.1mM $CaCl_2{\cdot}2H_2O$) supplemented with 100, 200 or 300 ${\mu}$g/ml SCF, respectively. Matured oocytes were activated with two electric pulses (DC) of 1.2 kv/cm for 30 ${\mu}$sec. The activated embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Oocytes activated in the presence of SCF showed a significantly higher blastocyst rate than control (p<0.05). Apoptosis rate was significantly lower in 100 ${\mu}$g/ml SCF group than other groups (p<0.05). Cdc2 kinase activity in control and SCF treatment group of oocytes was determined using MESACUP cdc2 kinase assay kit at 1, 5, 10, 15, 30, 45 and 60 min after activation. Cdc2 kinase activity was significantly decreased (p<0.05) in SCF group than MII oocytes or control within 5 min. For NT embryo production, reconstructed oocytes were fused in the fusion medium supplemented with 0.1 mM $CaCl_2{\cdot}2H_2O$ (T1), 1.0 mM $CaCl_2{\cdot}2H_2O$ (T2) and 0.1 mM $CaCl_2{\cdot}2H_2O$ with 100 ${\mu}$g/ml SCF (T3). Fused embryos were cultured in PZM-3 under 5% $CO_2$ in air at $38.5^{\circ}C$ for 6 days. Developmental rate to blastocyst stage was significantly higher in T3 than other groups (23.0% vs. 13.5 to 15.2%) (p<0.05). Apoptosis rate was significantly lower in T3 than T1 or T2 (p<0.05). The relative abundance of Bax-${\alpha}$/Bcl-xl was significantly lower in in vivo or SCF group than that of control (p<0.05). Moreover, the expression of p53 and caspase3 mRNA was significantly lower in in vivo or SCF group than that of control (p<0.05). These results indicate that the addition of SCF at fusion/activation might improve in vitro development of porcine NT embryos through regulating cdc2 kinase level and expression of apoptosis related genes.

• Journal of the Korean School Mathematics Society
• /
• v.17 no.4
• /
• pp.507-539
• /
• 2014

The algebra is an important tool influencing on a mathematics in general. To make good use of the algebra, it is necessary to transfer from a given situation to a proper algebraic representation. But some research in related to algebraic word problems have reported the difficulty changing to a proper algebraic representation. Our study have focused on transformation and elaboration of algebraic representation. We investigated in detail the responses and perceptions of 29 Grade 7 students while transforming to algebraic representation, only concentrating on the literature expression form the problematic situations given. Most of students showed difficulties in transforming both descriptive and geometric problems to algebraic representation. 10% of them responded wrong answers except only a problem. Four of them were interviewed individually to show their thinking and find the factor influencing on a positive elaboration. As results, we could find some characteristics of their thinking including the misconception that regard the problem finding a functional formula because there are the variables x and y in the problematic situation. In addition, we could find the their fixation which student have to set up the equation. Furthermore we could check that making student explain own algebraic representation was able to become the factor influencing on a positive elaboration. From these, we also discussed about several didactical implications.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.4
• /
• pp.189-193
• /
• 1981

An apparatus for continuous measurements of sorption isotherm of dried food was manufactured to shorten the time required for equilibration. The apparatus was so designed that the temperature, air velocity and relative humidity in the experimental chamber could be controlled. The use of dynamic stream of conditioned air with a velocity of 0.2m/sec, instead of static atmosphere, allowed a faster equilibration of dried filefish muscle at $25^{\circ}C$. The mean time necessary for the equilibration of dried filefish muscle at the water activity of a given state to a higher water activity was about 45 hours. The monolayer moisture content of dried filefish muscle calculated from BET-equation was 0.092 kg water /kg dry matter at $25^{\circ}C$.

• Journal of Convergence for Information Technology
• /
• v.7 no.6
• /
• pp.193-199
• /
• 2017

The research is aimed at finding out the relationship between vocational stress and willingness to engage in vocational stress, which measures vocational stress and the ability to cope with the job, and how the job stress relates to job mobility. First of all, the job stress and willingness to transfer jobs related to sexual harassment related agencies have a positive correlation, while self-exploitation, job stress, and willingness to move jobs have shown negative correlation. Second, the self-assessment of self-assessment of ego resilience has served as a complete parameter in relation to the relationship between employee motivation and willingness to leave the job, which is the job of occupational duties. Based on this study, it is important to note that self-reference is an important factor in determining the role of job stress in the workforce because of its self-reference of job stress and motivation in relation to job stress.

• Management & Information Systems Review
• /
• v.29 no.4
• /
• pp.225-244
• /
• 2010

In the information society, characterized by knowledge and network economy, standards and standardization became a very important factor in determining the competitiveness of nations and firms. This paper defines the concept of standards and standardization and reconstructs the theory on the relationship between standards and technological innovation. The findings and policy implications are as follows. First, the effect of standards on technological innovation differs according to its function(compatibility, minimum quality, information, and variety reduction) and types(product-related and non-product). On the other hand, standards can impede technological innovation. Second, in terms of national innovation system(NIS), standards are an infra-technology, which is a public good. Therefore, government should decide the optimal level of investment on standards and standardization. Third, since standards foster firms' innovation over the all stages of business activities company, industry, and government should connect standardization activities with R&D, manufacturing, marketing, supply chain, and technology transfer, Fourth, standards play an important role in product innovation as well as process innovation. Based on these theoretical background and hypotheses, the empirical study of the Korean firms is needed.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.4
• /
• pp.307-315
• /
• 2001

Objective: To evaluate the clinical outcomes and influencing factors of in vitro fertilization and embryo transfer (IVF-ET) in patients with failed pregnancy after microsurgical reversal of tubal sterilization. Materials and Methods : From January, 1997 to December, 2000, IVF-ET was performed in two groups; the study TR (tubal reanastomosis) group consisted of 147 cycles in 66 patients with failed microsurgical reversal of tubal sterilization, and the control group of 115 cycles in 67 patients with bilateral tubal occlusion (BTO). The two groups were evaluated and compared for clinical characteristics, clinical pregnancy rates, and factors influencing the outcomes of IVF-ET. Results: Compared with the control BTO group, age and the previous parity were significantly higher ($36.3{\pm}2.7$ vs. $33.6{\pm}2.0$ years, p<0.05; $1.6{\pm}0.7$ vs. $0.2{\pm}0.4$, p<0.05), and the clinical pregnancy rate per cycle was significantly lower (23.8% (35/147) vs. 29.3% (34/115), p<0.05) in the TR group. Difference in the clinical pregnancy rates was age-related, since there was no significant difference between the two groups, except for the previous parity ($1.6{\pm}0.7$ vs. $0.1{\pm}0.3$, p<0.05), when the patients aged 37 years or older were excluded. No difference was found in terms of the following: the proportion of controlled ovarian hyperstimulation (COH) cycles with GnRH agonist ultrashort protocol, the duration of COH, the dosage of gonadotropins used, and the numbers of oocytes retrieved and of embryos transferred, irrespective of age correction. Conclusions: The outcomes of IVF-ET following the failed microsurgical reversal of tubal sterilization depend upon patient age. The previous fertility of patients does not seem to be a factor of better IVF-ET prognosis.

• Korea Journal of Hospital Management
• /
• v.7 no.3
• /
• pp.44-62
• /
• 2002

Advanced surgical technology demands more precise, meticulous, and time-consuming procedures. In addition, the patient's preference of tertiary health providers makes over crowding of the University Hospitals. Therefore, it has been necessary to maximize utilization of the operating room of such hospitals to accommodate these requirements. This study, targeting 1,302 surgical cases performed in 22 operating rooms at a university hospital in Seoul from October 8 to November 1, 2001, analyzed reasons for delay, and factors that caused delayed use of operating rooms. This study also assessed that the rate of operating room use would increase if the sources for possible reform were improved. 1. Among total of 1,302 cases of surgery, the incidence of surgeries in which there were no time delays and no factors for delay were discovered is 71.4% or 930 cases: the incidence in which surgeries were delayed was 28.6% or 372 cases. 2. As results of logistic regression for delay, procedures involving women were delayed 1.4 times more frequently than those of men. Compared to Department A, Department B was 1.8 times more likely to be delayed, and Department H was 0.4 times less likely to be delayed. Regional anesthesia was 2.4 times more likely to be delayed than general anesthesia, and surgeries that PCA was applied were 0.6 times less likely to be delayed than those when it was not. Surgeries performed on the Thursday were 1.7 times more likely to be delayed than those performed on the Monday. Compared to surgeries performed between 07:00-07:59, those performed between 08:00-08:29 were 4.3 times higher. 3. The reasons for delay were related to surgeon, surgical department, patient, anesthesia, administrative system, sick ward, and support services. Among these, 5,755 minutes for 276 delayed cases could be resolved easily, and resolving delays of 3,320 minutes for 131 cases would be more difficult. Among the causes for delay that could be improved, delays due to patient's transfer and surgeon's factor were the most common, 21.6% and 17.4% respectively. 4. If resolvable delays are improved, pre-anesthesia room is administered, and regional anesthesia and PCA are done ahead of time, use of emergency operating rooms will increase, we can increase overall utilization by 4.09%, we will save 744 minutes a day, we can reduce the time the operation room is used after 4 PM by 35%, and we can resolve the operation cancellations due to insufficient operating rooms. For the increase in the use of operating rooms, we need to maximally decrease the delays that could be improved, by allocating block time based on used totals hours of elective cases, giving accurate information on surgery schedule, voluntary cooperation by staff participating in surgeries in reducing delay time, and the hospital management's will to improve delay.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.9
• /
• pp.1334-1341
• /
• 2007

This study identified hepatic differentially expressed genes (DEGs) affecting the marbling of muscle. Most dietary nutrients bypass the liver and produce plasma lipoproteins. These plasma lipoproteins transport free fatty acids to the target tissue, adipose tissue and muscle. We examined hepatic genes differentially expressed in a differential-display reverse transcription-polymerase chain reaction (ddRT-PCR) analysis comparing high- and low-marbled Hanwoo steers. Using 60 arbitrary primers, we found 13 candidate genes that were upregulated and five candidate genes that were downregulated in the livers of high-marbled Hanwoo steers compared to low-marbled individuals. A BLAST search for the 18 DEGs revealed that 14 were well characterized, while four were not annotated. We examined four DEGs: ATP synthase F0, complement component CD, insulin-like growth factor binding protein-3 (IGFBP3) and phosphatidylethanolamine binding protein (PEBP). Of these, only two genes (complement component CD and IGFBP3) were differentially expressed at p<0.05 between the livers of high- and low-marbled individuals. The mean mRNA levels of the PEBP and ATP synthase F0 genes did not differ significantly between the livers of high- and low-marbled individuals. Moreover, these DEGs showed very high inter-individual variation in expression. These informative DEGs were assigned to the bovine chromosome in a BLAST search of MS marker subsets and the bovine genome sequence. Genes related to energy metabolism (ATP synthase F0, ketohexokinase, electron-transfer flavoprotein-ubiquinone oxidoreductase and NADH hydrogenase) were assigned to BTA 1, 11, 17, and 22, respectively. Syntaxin, IGFBP3, decorin, the bax inhibitor gene and the PEBP gene were assigned to BTA 3, 4, 5, 5, and 17, respectively. In this study, the in silico physical maps provided information on the specific location of candidate genes associated with economic traits in cattle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.528-534
• /
• 2019

This study analyzes the factors affecting China's carbon emissions from 1985 to 2016. In recent years, the whole industries of China are in the midst of industrialization and have several problems. Now, the low-carbon economy has become the main task of China's economic development. This study analyzes the factors affecting China 's carbon emissions by selecting relevant data onto the Chinese yearbook and using a time series model. The analysis shows that related industries continue to innovate and increase the use of green energy such as electricity, but coal is still the largest share of the energy consumed. As energy use efficiency increases and industrial R&D investment increases year by year, carbon emissions are increasing every year. In addition, there is a stereotype that industry is the biggest factor affecting carbon emissions. The research found that the impact of the industry on China's carbon emissions is declining gradually. While controlling industrial carbon emissions, keeping continue to improve technology development and focusing on carbon emissions from other industries are critical to reduce overall carbon emissions. Based on the empirical results, if we can change stereotypes starting from the nature of the data, we will quickly reach a low carbon sustainable development economy.