• 한국항해항만학회지
• /
• 제30권6호
• /
• pp.525-531
• /
• 2006

항만에 있어서 하역장비는 매우 중요하다. 컨테이너 크레인이나 트랜스퍼 크레인 같은 장비가 고장이 나면 수리나 예비품의 재주문에 걸리는 시간동안 작업이 이루어지지 못하므로 엄청난 비용손실을 초래한다. 그러나 가격이 고가이므로 예비품을 많이 보유할 수도 없는 형편이다. 대체적으로 부피가 크고 고가인 항만 장비의 특성상 효율적인 예방정비와 고장 분석을 통해 장비의 신뢰성을 확보하는 것이 무엇보다 필요하다. 본 연구는 항만 장비 중 주요 장비인 트랜스퍼 크레인을 선정하여 시스템 및 기능, 고장 메카니즘을 분석하였으며, 고장/정비 이력 데이터의 수집 및 정리를 통하여 고장과 정비 작업의 내용을 표준화하였다. 장비의 운영 및 정비 작업을 전산화하기 위한 기초 작업인 본 연구는 다음 세대 장비의 최적 설계와 장비의 최적 운영 정책을 설계하는 새로운 시도가 될 것이다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.363-366
• /
• 2006

항만에 있어서 하역장비는 매우 중요하다. 컨테이너 크레인이나 트랜스퍼 크레인 같은 장비가 고장이 나면 수리나 재주문에 걸리는 시간동안 작업이 이루어지지 못하므로 엄청난 비용손실을 초래한다. 그러나 가격이 고가이므로 예비품을 많이 보유할 수도 없는 형편이다. 대체적으로 부피가 크고 고가인 항만 장비의 특성상 효율적인 예방정비와 고장 분석을 통해 장비의 신뢰성을 확보하는 것이 무엇보다 필요하다. 본 연구는 항만 장비 중 주요 장비인 트랜스퍼 크레인을 선정하여 시스템 및 기능, 고장 메카니즘을 분석하였으며, 고장/정비 이력 데이터의 수집 및 정리를 통하여 고장과 정비 작업의 내용을 표준화하였다. 장비의 운영 및 정비 작업을 전산화하기 위한 기초 작업인 본 연구는 다음 세대 장비의 최적 설계와 장비의 최적 운영 정책을 설계하는 새로운 시도가 될 것이다.

• 반도체디스플레이기술학회지
• /
• 제1권1호
• /
• pp.1-7
• /
• 2002

Modem technology depends on the reliability of extremely high precision equipments. In the production of semiconductor wafer, optical and electron microscopes, ion-beam, laser device must maintain their alignments within a sub-micrometer. This equipment requires a vibration free environment to provide its proper function. Therefore, this high technology equipments require very strict environmental vibration criteria because it is used as basic data for the design of building structure and structural dynamics of equipment. In this paper, the new approach is proposed to investigate the mismatch problem of time and frequency domain for vibration criteria of sensitive equipment. The proposed approach is based on a vibration measurement data and a relative transfer function which can be obtained by experiment or analysis.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.569-575
• /
• 2014

A highly efficient class E power amplifier is demonstrated for application to wireless power transfer system. The amplifier is designed with an L-type matching at the output for harmonic rejection and output matching. The power loss and the effect of each component in the amplifier with the matching circuit are analyzed with the current ratio transmitted to the output load. Inductors with a quality factor of more than 120 are used in a dc feed and the matching circuit to improve transmission efficiency. The single-ended amplifier with 20 V supply voltage shows 7.7 W output power and 90.8% power added efficiency at 6.78 MHz. The wireless power transfer (WPT) system with the amplifier shows 5.4 W transmitted power and 82.3% overall efficiency. The analysis and measurements show that high-Q inductors are required for the amplifier design to realize highly efficient WPT system.

• 한국주조공학회지
• /
• 제28권2호
• /
• pp.74-78
• /
• 2008

An integrated riser heating equipment has been developed to control shrinkage defects originated from casting of a marine propeller. The integrated riser heating equipment is composed of up/down moving parts, heating power source parts and an integrated controller. Heat capacity putting into the riser was calculated quantitatively on the base of a heat transfer analysis, which consisted of the establishment of heating model and the theoretical analysis for heat transfer. The riser heating equipment was evaluated through arc heating and electro-slag heating method. With the results, the arc type heating method was selected by considering high thermal efficiency, inexpensive cost, and convenient workship. This equipment improves the quality of a propeller casting and the poor working environment.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1562-1568
• /
• 2014

Based on the average method and the geometrical technique to calculate the average value, the average model of the open-loop step-up converter in CCM operation is established. The DC equilibrium point and corresponding small signal model is derived. The control-to-output transfer function is presented and analyzed. The theoretical analysis and PSIM simulations shows that the control-to-output transfer function includes not only the DC input voltage and the DC duty cycle, but also the two inductors, the two energy-transferring capacitors, the switching frequency and the load. Finally, the hardware circuit is designed, and the circuit experimental results are given to confirm the effectiveness of theoretical derivations and analysis.

• 디지털산업정보학회논문지
• /
• 제9권1호
• /
• pp.79-86
• /
• 2013

In this paper which it is relating to the DSRC system based road side equipment, we propose the protocol stack architecture of road side equipment and the process structure of the main RM, L7 and LLC layers which is road side equipment device as well. And also we design the signal flow and data-transfer process as well between road side equipment and on board equipment to describe the installation process between road side equipment and von board equipment based on DSRC system. Thus, it is possible to provide various application services between intelligent transportation systems of road side equipment and local server, as well as it enables the local server managing the memorys of on board equipment which entry in service area thru the road side equipment.

• 항공우주시스템공학회지
• /
• 제10권2호
• /
• pp.1-6
• /
• 2016

The thermal analysis of electronic equipment is required to predict the reliability of electronic equipment being loaded on a satellite. The transient heat transfer of electronic equipment that was developed recently has been generated using a large-scale integration circuit. If there is a transient heat transfer between EEE(Electric, Electronic and Electro mechanical) parts, it may lead to failure the satellite mission. In this study, we performed the thermal design and analysis for reliability of APD(Antenna Pointing Driver) electronics for activation of a spaceborne X-band 2-axis antenna. The EEE parts were designed using a thermal mathematical model without the thermal mitigation element. In addition, thermal analysis was performed based on the worst case for verifying the reliability of EEE parts. For the thermal analysis results, the thermal stability of electronic equipment has been demonstrated by satisfying the de-rating junction temperature.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.39-43
• /
• 2008

Productivity is one of the performance indices of the semiconductor equipment in manufacturing viewpoint. Among many ways tried and adopted for improvement of the productivity of the FAB equipment, variation of equipment configuration was considered and its effect on the throughput was analyzed. Parallel machine cycle charts that were generated based on the equipment log were used in the analysis. Efficiency of the equipment due to change of the structure and the probability of the usage in the manufacturing process were examined. The results showed that the modification of the control algorithm in the equipment and the redistribution of the process time for each process and transfer module along to the change in the structure enhance the throughput of the equipment.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.802-808
• /
• 2009

In this paper, the experimental study on the identification of noise sources and noise transmission paths was carried out for the cabin noise control of construction equipment. In order to investigate noise and vibration characteristics of cabin structure, sound absorption, transmission, and radiation tests were performed using cabin assembly models. The noise/vibration source levels were obtained from the real cabins of wheel loader and excavator. Using transfer functions of cabins and real cabins' source data, cabin noise was decomposed into airborne and structureborne noise transmissions. Finally noise sources and major transmission paths were successfully identified for wheel loader and excavator's cabins.