• 제목/요약/키워드: Transfer device

검색결과 1,124건 처리시간 0.03초

볼 기반의 모바일 햅틱 인터페이스 디자인 (Design of Ball-based Mobile Haptic Interface)

  • 최민우;김정현
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2009년도 학술대회
    • /
    • pp.122-128
    • /
    • 2009
  • 이 논문에서는 모바일 환경에서 촉각적 사용자 체험 (User Experience)을 향상 시킬 수 있도록 디자인된 새로운 방식의 핸드헬드 볼 기반의 햅틱 인터페이스 "TouchBall" 을 소개하고 그 성능을 평가한다. 작은 모바일 디바이스(모바일 폰, PDA, PMP 등)에 적당하도록 볼 기반의 기계적 메커니즘을 사용하여 작은 회전력으로도 높은 감도의 다양한 촉감을 손에 전달할 수 있도록 구성되어 있다. 제안하는 인터페이스를 적용한 프로토타입 버전을 구현하였고, 정신물리학적 실험을 통해 사람의 감각 인식의 가장 기본적인 척도가 되는 감지 역치를 측정하였다. 그리고 구현 가능한 다양한 촉각 패턴들의 인식강도를 절대적 강도추정 방법으로 측정하여 정확도와 인식강도를 알아보고 그 응용 가능성을 찾아보았다.

  • PDF

수 원자층 두께의 MoS2 채널을 가진 전계효과 트랜지스터의 게이트 전압 스트레스에 의한 I-V 특성 변화 (The Change of I-V Characteristics by Gate Voltage Stress on Few Atomic Layered MoS2 Field Effect Transistors)

  • 이형규;이기성
    • 한국전기전자재료학회논문지
    • /
    • 제31권3호
    • /
    • pp.135-140
    • /
    • 2018
  • Atomically thin $MoS_2$ single crystals have a two-dimensional structure and exhibit semiconductor properties, and have therefore recently been utilized in electronic devices and circuits. In this study, we have fabricated a field effect transistor (FET), using a CVD-grown, 3 nm-thin, $MoS_2$ single-crystal as a transistor channel after transfer onto a $SiO_2/Si$ substrate. The $MoS_2$ FETs displayed n-channel characteristics with an electron mobility of $0.05cm^2/V-sec$, and a current on/off ratio of $I_{ON}/I_{OFF}{\simeq}5{\times}10^4$. Application of bottom-gate voltage stresses, however, increased the interface charges on $MoS_2/SiO_2$, incurred the threshold voltage change, and degraded the device performance in further measurements. Exposure of the channel to UV radiation further degraded the device properties.

무선통신을 이용한 위치인식 시스템 개발 (Development of Position Recognition System by Wireless Communication)

  • 손종훈;황기현
    • 한국정보통신학회논문지
    • /
    • 제17권6호
    • /
    • pp.1477-1486
    • /
    • 2013
  • 본 논문에서는 ZigBee를 기반으로 하는 무선 통신기술을 이용한 위치인식 시스템을 구현하였다. 무선 통신 기술을 이용하여 보다 정밀한 위치정보를 산출하고 위치정보를 서비스하기 위하여 관련 H/W와 S/W를 개발하였다. 위치인식 시스템을 구현하기 위해 스마트 태그(위치단말기), 수신기, 중계기를 개발하였고, 스마트 태그에는 120~130KHz, 13~14MHz, 2.0~3.0GHz의 무선주파수용 태그를 내장하였으며, 수신기 및 중계기는 태그 인식용 무선신호를 송출하여 위치단말기의 액티브 RFID 태그를 인식하는 태그 모듈을 적용하였다. 공동현관 관제기는 스마트 태그를 공동현관 관제기에 가져가면 LAN을 통해 출입통제 서버로 태그 값을 전송하도록 시스템을 구현하였다.

A novel red light-emitting material and the characteristics of OLEDs using the same as red dopant

  • Lim, Seung-Han;Park, Jung-Hyun;Seo, Ji-Hoon;Ryu, Gweon-Young;Kim, Young-Kwan;Shin, Dong-Myung
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
    • /
    • pp.1573-1576
    • /
    • 2007
  • ABCV-Py, a new red fluorescent material, in which two identical electron donor (dimethylamino group) and acceptor (cyano group) moieties are linked to two independent biphenyl groups which share the same core phenyl, has been synthesized for use in OLED application. Performance of red doped electroluminescent devices using ABCV-Py as dopant were measured with various host materials, $Alq_3$, CBP, DPVBi, and p-terphenyl. The performance of device with DPVBi host material was better than those with other host materials and high doping concentration could be applied on device with ABCV-Py as dopant.

  • PDF

Ti:LiNbO3 집적광학형 편광모드 조절기의 이론적 고찰 (A theoretical study on Ti:LiNbO3 integrated optical polarization mode controllers)

  • 문제영;정홍식;이한영
    • 한국광학회지
    • /
    • 제15권2호
    • /
    • pp.142-148
    • /
    • 2004
  • z-축 방향으로 진행하는 Ti:LiNbO$_3$ 광도파로와 전기광학효과를 이용하여 설계된 집적광학형 편광조절기를 검토하였다. 소자는 λ/4 - λ/2 - λ/4 wave-plates들로 구성되었으며, Jones matrix에 근거하여 유도된 전달 메트릭스와 Poincare 구 좌표계를 이용하여 소자의 동작원리를 체계적으로 분석하였다. 편광제어에 필요한 전압들을 전산모사 하였으며, 이로부터 본 연구에서 제안된 편광조절기는 어떠한 입력 편광 상태로부터 특정한 출력 편광 상태로 변화시킬 수 있음을 확인하였다.

압전에너지 수확을 위한 AC/DC 공진형 자려 부스트 컨버터 (AC/DC Resonant Piezo-Powered Boost Converter for Piezoelectric Energy Harvesting)

  • 김혁진;정교범
    • 전력전자학회논문지
    • /
    • 제14권6호
    • /
    • pp.488-495
    • /
    • 2009
  • 본 논문은 기계적 에너지를 전기에너지로 변환하는 압전소자를 이용한 에너지 수확 시스템 내에서 전력변환을 수행하는 새로운 AC/DC 공진형 자려(自勵) 부스트 컨버터를 제안한다. AC/DC 공진형 자려 부스트 컨버터의 자려 스위칭을 위한 게이트 회로는, MOSFET 특성을 이용하여 압전소자 출력전압의 최대값을 검출하고 LC 공진회로의 특성을 이용하여 영전압 스위칭을 하며, 승압형 전력변환을 수행하기 위해서 별도의 전원을 필요로 하지 않는다. 제안된 컨버터 회로의 동작원리를 설명하고, 기존 연구 개발된 토폴로지와 비교, PSPICE 시뮬레이션 및 실험을 통하여 유용성을 검증한다.

Znq2와 dye에 의한 적색 유기 전계 발광 소자의 발광특성 (Emission Properties of Red OELD with $Znq_2$ and dye)

  • 조민정;최완지;박철현;임기조;박수길;김현후
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 C
    • /
    • pp.1466-1468
    • /
    • 2001
  • For the full color organic electro-luminescent device, essentially, red, green, and blue emissions are required. But red emission is not to reach minimum level of practical use 31[lm/W]. In order to optimize color purity and power consumption requirements, it is important for the materials development efforts to search for improvements in red emission effisiency. In this study, the bis(8-oxyquinolino)zinc II ($Znq_2$) were synthesized successfully from zinc chloride($ZnCl_2$) as a initial material. Then, we fabricated red organic electroluminescent device with a dye(DCJTB)-doped and inserted $Znq_2$ between emission layer and cathode layer for increasing EL efficiency. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl) -1,1'-diphenyl-4.4'-diamine(TPD), and the host material of emission layer is $Znq_2$. For the inserting of $Znq_2$, efficiency increased.

  • PDF

Designing of Multi-tier GIS Architecture with Sematics Filter

  • Yabiku, Tomohide;Nerome, Moeko;Matsuda, Yoshitaka;Kang, Dongshik;Miyagi, Hayao;Onaga, Kenji
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -2
    • /
    • pp.822-825
    • /
    • 2002
  • Geographic Information System(GIS) has become an essential tool for making efficient interaction with both natural and artificial envirionment. Currently, it is being used on an inteligent tool in many device like the personal digital assistant(PDA) and the cellular phone and so on. However, these devices show very low performance comparing to a personal computer(PC). These devices(PDA, celluar phone) posses a less powered device profile. The less powerful hardware make these devices in capable to handle GIS based large spacial data. In this paper, we propose a new concept of multi-tier GIS oriented architecture to improve the data transfer performance providing only the necessary information required by the user using semantic filter.

  • PDF

Heat Dissipation of Sealed LED Light Fixtures Using Pulsating Heat Pipe Technology

  • Kim, Hyung-Tak;Park, Hae-Kyun;Bang, Kwang-Hyun
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제36권1호
    • /
    • pp.64-71
    • /
    • 2012
  • An efficient cooling system is an essential part of the electronic packaging such as a high-luminance LED lighting. A special technology, Pulsating Heat Pipe (PHP), can be applied to improve cooling of a sealed, explosion-proof LED light fixture. In this paper, the characteristics of the pulsating heat pipes in the imposed thermal boundary conditions of LED lightings were experimentally investigated and a PHP device that works free of alignment angle was investigated for cooling of explosion-proof LED lights. Five working fluids of ethanol, FC-72, R-123, water, and acetone were chosen for comparison. The experimental pulsating heat pipe was made of copper tubes of internal diameter of 2.1 mm, 26 turns. A variable heat source of electric heater and an array of cooling fins were attached to the pulsating heat pipe. For the alignment of the heating part at bottom, an optimum charging ratio (liquid fluid volume to total volume) was about 50% for most of the fluids and water showed the highest heat transfer performance. For the alignment of the heating part on top, however, only R-123 worked in an un-looped construction. This unique advantage of R-123 is attributed to its high vapor pressure gradient. Applying these findings, a cooling device for an explosion-proof type of LED light rated 30 W was constructed and tested successfully.

ISO/IEEE 11073 개인건강기기 표준의 PM-store 구현을 위한 복잡도 분석 (Complexity Analysis for Implementation of the PM-store of ISO/IEEE 11073 PHD Standards)

  • 김상곤;이창기;김태곤;황희정
    • 전기전자학회논문지
    • /
    • 제19권3호
    • /
    • pp.447-454
    • /
    • 2015
  • 본 논문은 ISO/IEEE 11073 개인건강기기 표준에서 정의된 PM-store 개념을 적용하여 주기적으로 발생하는 대용량 측정 데이터의 전송 프로토콜을 구현할 경우, 개인건강기기의 중앙처리장치(CPU)에서 수행해야 하는 명령사이클(instruction cycles)의 수를 기반으로 한 복잡도 분석에 대한 연구이다. PM-store의 구성에 따라 중앙처리 장치가 처리해야 할 명령 사이클의 수에 대한 분석모델을 제시하였다.