• Transactions on Electrical and Electronic Materials
• /
• 제16권2호
• /
• pp.103-105
• /
• 2015

Effect of silicon doping into ZnSnO systems was investigated using solution process. Addition of silicon was used to suppress oxygen vacancy generation. The transfer characteristics of the device showed threshold voltage shift toward the positive direction with increasing Si content due to the high binding energy of silicon atoms with oxygen. As a result, the carrier concentration was decreased with increasing Si content.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.219-221
• /
• 1990

Y-branch directional coupler type optical modulators with three different coupling lengths were fabricated on z-cut LiNbO3 and tested at λ-1.3${\mu}{\textrm}{m}$. One device gad an exact coupling length for complete power transfer and two other devices had coupling lengths. It was confirmed that, for dc operation, experimental results agreed well with theoretical results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1636-1638
• /
• 2007

We report on low-voltage pentacene TFTs with a Al2O3/OTS as a gate dielectric. Improving device characteristics, we performed chemical modification of self-grown Al2O3 surface with an octadecyltrichlorosilane(OTS) self-assembled monolayer(SAM). As the result of this combination, the mobility was improved from 0.3 to $0.45\;cm^2/Vs$. In addition, we examined that the SAM dipole electric field have an influence on gate leakage current, transfer and output characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.407-410
• /
• 2003

We will introduce our new concept deposition system for SMOLED manufacturing in this conference. This system is designed to deposit organic and metal material to downward to overcome the limit of substrate size and process tact time hurdle for OLED mass production, and is organized with organic deposition chamber, substrate pre-cleaning chamber, metal deposition chamber and encapsulation system. These entire process chambers are integrated with linear type substrate transfer system. We also compare our new SMOLED manufacturing system with conventional vacuum deposition systems, and show basic organic thin film property data, organic material deposition property data, and basic device property.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.520-523
• /
• 1989

MAP(Manufacturing Automation Protocol), Network Protocol for FA has 7 Layer Structure of OSI. Being an Application Layer Protocol for Communication Interfaced with the Actual Programmable Devices, MMS(Manufacturing Message Specification) Consists of Three Factors of Services, Interfaces, and Protocol. For Details, It Classifies with the Followings ; Connection/Context Management, Remote Variable Access, Semaphore Management, File transfer and Management, Program UP/DOWN Load, Remote Program Fxecution. In this Paper Designing MAP Network Station of Programmable Device, we Analyze the Protocol of MMS, and Realize the State Diagram of each Services and Propose the Model of MMS Function Call Instructions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.895-902
• /
• 2005

This paper presents contactless power transfer system for an electric railway system which makes use of electromagnetic induction among the coils. A full bridge type series resonant inverter is used as a power conversion system. and MC14046 PLL of Motorola is used as a control device. Finally, presented system is verified by simulation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.629-634
• /
• 2000

This System is developed for the estimation of the Camera Lens Resolution. Signal data proportional to light intensity is obtained and sampled from the 2D CCD. Based on the measured signal. the MTF charateristcs of a camera lens are measured. We could measure the sagittal and tangential MTF in the on and off-axis at the same time. The automatic measurig methods for optimal image plane, magnification, and best marginal direction of test lens are presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.327-335
• /
• 1999

A batch process in which transfer bars are rolled in single bar units involves many problems in terms of quality, yield and threading stability. The endless rolling process is an effective solution to such problems. In this, study, an analysis model is proposed to calculate the distribution of normal stress in endless rolling process. The model was examined by comparing with the result of experiment. A device using the spring is developed for improving the welding quality.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.825-830
• /
• 1990

This paper reports the design procedure and testing result of a servo driven pan/tilt device which is capable of tracking arbitrary movement of a specified target object. In order to achieve real-time acquisition of feedback signal, a 2 degrees-of-freedom non-contact type displacement follower is used. The performance of the system is tested for different target velocities and control gains. The result of the research may provide an effective tool for visual transfer in the context of teleoperation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1391-1393
• /
• 1994

A silicon microbridge flow sensor has been developed. The heat transfer within silicon microbridge is modeled to predict the characteristics of the sensor. The flow sensor shows high sensitivity at small flow rate. This device is simple to fabricate, using standard IC and micromachining technology.