• Journal of Electrical Engineering and Technology
• /
• 제2권4호
• /
• pp.518-524
• /
• 2007

This paper describes several improved characterizations of the EPIC CCD, which now has modified electrode and channel structures. From a 3-D numerical simulation of the device, its channel doping and potential distributions are then observed for the optimization of the charge transfer. A wavelength-dependence on the device structure is observed in terms of the reflectivity of the incident radiation. The optical properties of ultra-low energy levels, when using an open-electrode structure, are then considered to improve their quantum efficiency.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1663-1667
• /
• 2011

Voltage variation caused by large loads such as arc furnace and large motors, which use the large and instantaneous currents, can cause the voltage flicker. The flicker irritates the human's eyes and also has an adverse effect on protection device, rotating machine and electronic device etc, therefore the flicker needs to be managed effectively. Recently, the Korea power quality standard has been established on the IEC standards. This paper presents the flicker management standard for distribution power system and suggests the flicker transfer coefficients for Korea power system based on the IEC 61000-3-7.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.860-864
• /
• 2003

Recently. use of compound semiconductor is widely increasing in the area of LED and RF device. In this study, wafer bonding module is designed and optimized to bond 6 inches device wafer and carrier wafer. Bonding process is performed in vacuum environment and resin is used to bond two wafers. Load spreader and double heating mechanisms are adopted to minimize wafer warpage and void. Structure and heat transfer analyses show the designed mechanisms are very effective in performance improvement.

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.570-577
• /
• 2007

A micromachined convective accelerometer is a recently developed device. Typical micromachined accelerometers use a solid proof mass for measuring acceleration. But a micromachined convective accelerometer does not use a solid proof mass. A micromachined convective accelerometer is composed of a heating resistor and temperature sensors. This device measures acceleration by using convective heat transfer phenomenon. Therefore characteristics of a micromachined convective accelerometer are different as compared with typical micromachined accelerometer. In this research, we analyze the convective accelerometer by using transient convective heat transfer analysis. Based on the results of a convective accelerometer, we propose a new model which has improved performance.

• ETRI Journal
• /
• 제33권6호
• /
• pp.973-976
• /
• 2011

This letter describes an efficient technique for maximum power point tracking (MPPT) of an energy harvesting device. It is based on controlling the device voltage at the point of maximum power. Using a microcontroller with a power saving technique, the MPPT algorithm maintains the maximum power with low power consumption. An experiment shows that the algorithm maximizes the energy transfer power using an energy management IC fabricated in a 0.18-${\mu}m$ process. Compared to direct energy transfer to a battery, the proposed technique is more efficient for low-energy harvesting under variable conditions.

• 한국광학회지
• /
• 제6권3호
• /
• pp.173-177
• /
• 1995

칼날주사방법을 이용한 CCD의 MTF 측정장치를 제작하고 일차원 CCD의 MTF특성을 측정하였다. 주사방향에 수직인 직선과 칼날이 이루는 각도에 따른 CCD MTF 측정값의 변화는 $1^{\circ}$ 미만의 작은 각도변화에 의해서도 MTF값이 크게 변함을 알 수 있었으며 CCD의 MTF 측정값은 간섭필터와 텅스텐 필라멘트가 조합된 파장에 따라 다른 값을 나타내었다. 또한 광원의 색온도 변화에 의한 CCD의 MTF특성과 CCD 화소들의 균일성을 조사하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.166-169
• /
• 2000

The Organic Electroluminescence (OEL) device, that was consisted of ALq3(8-hydroxyquinoline aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine), has been used. We investigated characteristics of brightness and current density about OEL that was oxidated each layers. We used two samples that were fabricated each continuous and non-continuous method. Emission was observed above 10mA/$\textrm{cm}^2$ and luminance was measured to be 1530cd/$\textrm{cm}^2$ at a current density of 100mA/$\textrm{cm}^2$. A luminance of over 2600cd/$\textrm{cm}^2$ was also observed after the final fabrication process.

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.1-5
• /
• 2019

As the number of IOT devices is growing rapidly, various 'see-thru connection' techniques have been reported for efficient communication with them. In this paper, we propose a deep learning based IOT device recognition system for interaction with these devices. The overall system consists of a TensorFlow based deep learning server and two Android apps for data collection and recognition purposes. As the basic neural network model, we adopted Google's inception-v3, and modified the output stage to classify 20 types of IOT devices. After creating a data set consisting of 1000 images of 20 categories, we trained our deep learning network using a transfer learning technology. As a result of the experiment, we achieve 94.5% top-1 accuracy and 98.1% top-2 accuracy.

• 반도체디스플레이기술학회지
• /
• 제17권1호
• /
• pp.62-65
• /
• 2018

In the era of the 4th Industrial Revolution, IoT products of various and specialized fields are being developed and produced. Especially, the generation of the artificial intelligence, robotic technology Multilayer substrates and packaging technologies in the notebook, mobile device, display and semiconductor component industries are demanding the need for flexible materials along with miniaturization and thinning. To do this, this work use FCCL (Flexible Copper Clad Laminate), which is a flexible printed circuit board (PCB), to implement FPCB (Flexible PCB), COF (Chip on Film) Use is known to be essential. In this paper, I propose a transfer device which prevents the occurrence of scratches by analyzing the mechanism of wrinkle and scratch mechanism during the transfer process of thin film material in which the thickness increases while continuously moving in air or solution.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.181-187
• /
• 2005

본 논문에서는 CDMA무선망을 이용한 PDA기반의 취약한 전송로 상에서도 안전하게 메시지를 전송할 수 있는 서비스 모델과 PDA 특성을 고려한 보안 메시지 전송 프로토콜 제안하고 구현하였다. 제안된 서비스는 유선 인터넷 망과 오프라인 상태의 클라이언트 단말기를 SMS(Short Message Service)를 이용하여 연결하였다. 단말기는 SMS 메시지 수신 후에 SMS의 데이터를 분석하여 RAS(Remote Access Service)를 통해 데이터 채널을 생성하고 서버 측의 데이터가 PUSH 되도록 구현되었다. 구현된 보안 프로토콜은 SMS와 데이터 채널을 가지는 2채널 방식을 이용하여 각 통신 부문에서 안전한 통신을 보장 할 뿐 아니라, 안전한 세션키 통신을 위한 비표(nonce table)키 방식을 사용하였기 때문에 세션키 전송 시 키 길이도 줄이면서 높은 비트의 암호화를 할 수 있는 효과를 보였다.