• The Transactions of the Korea Information Processing Society
• /
• v.4 no.4
• /
• pp.1100-1105
• /
• 1997

The verial black stripe is one of the defects in a chrge-coupled device(CCD). Vertical black stripes are caused by some signal chrges which fail to transport form the vertical CCD region to the horizontal one. The defective transport of signal charges orignates in the potential barrier with the narrow width effects in the verti-cal-horizintal interface stuccture. The vertical black stripes show up when the charge transfer dfficiency is less than 99.2% under the low illumination condition. In this research, we designed and developed a new vertical-horizontal interface structre of a delta type, thus marking it possible to eliminate the vertical black stripes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1865-1870
• /
• 2014

Torque converter is a complex turbomachine used to transfer power smoothly from an engine to a transmission by lock-up clutch. A torque converter consists of the hydrodynamic clutch device and the lock-up clutch device. The retaining plate and driven plate are part of the lock-up clutch. The lock-up clutch connects directly to achieve the improvement of efficiency and fuel consumption. In this paper, using structure analysis of stress distribution on the shape of the mechanical stopper on retaining plate. The shape of mechanical stopper has effect on the stress distribution of lock-up clutch.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.90-94
• /
• 2011

In this paper, the energy transfer is associated with high frequency band and try to analysis the rectifier circuit structure and characteristics and find ways to maximum efficiency. Input signal at 13.56MHz is converted output DC signal with the experiments and measurements. Rectifier cirsuits can be divided into the half-wave, full-wave, bridge rectifier circuit. Research to the present with the passive components are carried out with a focus on efficiency improvements. Factors affecting the efficiency of rectification is dependent on the characteristics of the device. In this experiment, about 70% efficiency can be measured. By using an improved device for high efficiency could be obtained higher efficiency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.85-94
• /
• 2012

In this paper, we develop the new gestures of screen control with fingers on the FTIR multi touch table. It also describes recognition of mobile devices on the table using infrared camera. The FTIR multi touch table was incovenient to the existiog Bluetooth connection, because it is not provided with an HID(Human Input Device) interface. The proposed data transmission method using mobile device is to relieve the inconvenience of the data transfer and proceed more effectively. The new gestures and data transmission method is verified by FTIR multi touch table that is implemented for testing.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.7-13
• /
• 2019

In the case of the drilled shaft, one of the methods for calculating unit skin friction stress of rock socket parts is to measure the roughness of the excavated face. This method is to estimate the unit skin frictional resistance using a device which measures the roughness shape of the excavated face in the excavation step. In this study, the roughness shapes of the face of the rock socket part in the drilled shaft were measured directly in the perforated hole and the results are used to identify the characteristics of the unit skin friction of the bedrock. In addition, the static load test and the load transfer test were performed on the same pile to verify the result of the roughness test.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.13-13
• /
• 2009

We have investigated the fabrication and properties of bendable PZT film formed on plastic substrates for the application in flexible memory. These devices used the PZT active layer formed on $SiO_2/Si$ wafer by sol-gel method with optimized device layouts and Pt electrodes. After etching Pt/PZT/Pt layers, patterned by photolithography process. these layers were transferred on PET plastic substrate using elastomeric stamp. The level of performance that can be achieved approaches that of traditional PZT. devices on rigid bulk wafers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1680-1687
• /
• 2007

A hospital room has multiple patient monitoring devices at the bedside to monitor his or her status. However, vital sign monitors, ventilator and other bedside devices are made by a variety of different manufacturers and often cannot easily interface to the hospital information system. Medical environments incorporate complex and integrated data networks to transfer vast amounts of patient information, such as images, waveforms, and other forms of digital data. Hence, to assure interoperability of images, waveforms and patient data, Health Level Seven (HL7) was developed as an international standard to facilitate the communicating and storing of medical data. In this study, we developed middleware capable of receiving data from mCare 300 vital signs monitoring devices and converting the data to HL7 data format. The HL 7 middleware streamline clinical workflow and support patients. Therefore, clinical expertise are empowered to respond to dynamic healthcare situation as soon as they emerged, and consequently quality of care while helping to reduce the length of a patient's stay in a hospital.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.471-479
• /
• 2006

Automatic transfer equipments of manufacturing and process line trend toward big size as LCD glass is big size, heavy weight. The conventional stocker uses rotational motor and mechanical power converter device as travel axis of stocker crane and then frequent maintenances by complex structure and mechanical friction are required. Also it has problem to minimize the particle generation. To solve these problems, this paper verified the performance of permanent magnet(PM) excited transverse flux linear motor(TFLM) that is big power density per unit volume applied for travel axis of 7 generation stocker that is being big size, high power, long distance by the experiment based on proposed control algorithm, controller and power converter device.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.4
• /
• pp.37-42
• /
• 2000

The optical storage device has recently experienced significant improvements, especially for the aspects of high capacity and fast transfer rate. However, it is the fact that the optical storage device has the lower access time for the randomly scattered data compared to the hard disk drives. It is, therefore, necessary to develop a new type of optical storage system. In this study, we investigate the air bearing characteristics for the optical disk drives which have the swing arm actuator similar to the hard disk drives. Considering the requirements of the optical disk drives, we parameterize the shape of the air bearing surface and investigate its sensitivity to the flying characteristics for further optimized design outputs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1545-1551
• /
• 2002

The optical storage device has recently experienced significant improvement, especially for the aspects of high capacity and fast transfer rate. However, it is necessary to study a new shape of air bearing surface for the rotary type actuator because the optical storage device has the lower access time than that of HDD (Hard Disk Drives). In this study, we proposed the air bearing shape by using SA (Simulated Annealing) algorithm which is very effective to achieve the global optimum instead of many local optimums. The objective of optimization is to minimize the deviation in flying height from a target value 100nm. In addition, the pitch and roll angle should be maintained within the operation limits.