• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1636-1638
• /
• 2007

We report on low-voltage pentacene TFTs with a Al2O3/OTS as a gate dielectric. Improving device characteristics, we performed chemical modification of self-grown Al2O3 surface with an octadecyltrichlorosilane(OTS) self-assembled monolayer(SAM). As the result of this combination, the mobility was improved from 0.3 to $0.45\;cm^2/Vs$. In addition, we examined that the SAM dipole electric field have an influence on gate leakage current, transfer and output characteristics.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.510-513
• /
• 2006

Due to the location of vibration sensitive equipment on the floor, it is necessary for its vibration performance to be maintained within stringent limits, resulting in a design of higher mass and stiffness than would be usual for a floor of this type. Modal testing is conducted on the floor to obtain their dynamic characteristics. A considerable level of vibration transmission is observed by comparing the ratio of simulated transfer and point mobility FRFs of the floor.

• Korean Journal of Microbiology
• /
• v.28 no.4
• /
• pp.283-289
• /
• 1990

The competence time of Streptomyces viridochromogenes for aerial mycelium formation was determined. Within 10 hrs after spore inoculation the submerged mycelium was programed to form aerial mycelium, when the former was laid on agar plate. The white aerial mycelium was formed 17-22 hrs after the transfer. Ascorbic acid oxidizing enzyme band on native gel showed chracteristic mobility change during aerial mycelium formation. Total activity of this enzyme did not show any correlation with the differentiation. The asay condition for the crude enzyme was determined. EDTA and $FeCl_{2}$ showed stimulatory effect. Approximate ratio of oxygen consumed to ascorbic acid oxidized was 1:1.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.11-11
• /
• 2014

CVD 로 성장된 그래핀 표면위에 transfer 와 lithography 공정에서 잔류하게 되는 PMMA residue 는 mobility 의 감소와 high-k dielectrics 의 증착을 방해하는 결정적인 요인이다. 우리는 최적화 되어진 Ar ion beam 을 통해 PMMA residue 를 damage 없이 효과적으로 제거하였고, 손쉽게 high-k dielectrics 를 uniform 하게 증착할 수 있었다.

• International journal of advanced smart convergence
• /
• v.6 no.2
• /
• pp.82-88
• /
• 2017

The data generated by the BSN sensor attached to the human body is mostly mobile. Accordingly, in a mobile cloud environment that processes BSN data, the service should not be fixed in a specific area but be able to support it according to the move. The mobile device must be able to process, filter and transmit the collected BSN data. The cloud server must be able to collect the data processed by the mobile device and provide it as a service. And the transfer of data requires standardized transfer between each device. In this paper, we propose a data delivery method through standard schema when mobile device processes data and provides service in cloud system and a data processing method according to the movement of the mobile device.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.122-133
• /
• 1998

This paper presents the static analysis, the modal analysis and the forced vibration analysis on engine structures to find out the structure-borne noise sources by finite element method. The deformation of engine structures under the maximum combu- stion gas force was calculated through the static analysis, and the resonance possibilities were predicted by the modal analysis which ascertains mode shapes and the corresponding frequencies of engine global and its major noise sources in engine surfaces were investigated with the forced vibration analysis by means of finding the transfer mobilities on engine surfaces due to the piston impact and the velocity levels due to the combustion in consideration of oil film stiffness and damping coefficients. Finally, the direction of engine structure-borne noise reduction can be estabilished by the above-mentioned analysis procedure and the reduction effect of cost on proto-type engine build-up is expected.

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.577-580
• /
• 2007

The influence of flow rate has been investigated on the treatment efficiency of continuous cycling electrolytic process employing artificial and actual photographic wastewater which containing silver ion. For artificial wastewater, the treatment efficiency of process was found to rise ca. three times when the flow rate of wastewater was increased from 3 mL/min to 15 mL/min. The process efficiency was doubled under the same condition regarding actual wastewater. The effect of flow rate on the treatment efficiency was observed to be altered according to the metal ionic form and solution composition. The coefficient of mass transfer was estimated using model equation, which verified that the raised treatment efficiency at higher flow rate was due to the increased mobility of ionic species.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.91-102
• /
• 2015

Analytical solutions for the forced convection heat transfer of viscoelastic fluids obeying the Giesekus model are obtained in a concentric annulus under laminar flow for both thermal and hydrodynamic fully developed conditions. Boundary conditions are assumed to be (a) constant fluxes at the walls and (b) constant temperature at the walls. Temperature profiles and Nusselt numbers are derived from dimensionless energy equation. Subsequently, effects of elasticity, mobility parameter and viscous dissipation are discussed. Results show that by increasing elasticity, Nusselt number increases. However, this trend is reversed for constant wall temperature when viscous dissipation is weak. By increasing viscous dissipation, the Nusselt number decreases for the constant flux and increases for the constant wall temperature. For the wall cooling case, when the viscous dissipation exceeds a critical value, the generated heat overcomes the heat which is removed at the walls, and fluid heats up longitudinally.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.993-996
• /
• 1999

A mobile agent is a program which is capable of migrating autonomously from host to host in the heterogeneous network, to perform some computation on behalf of the user. Mobile agents have many advantages in the distributed computing environment. But they are likely to suffer many attacks on the security due to the mobility. In order to make use of a mobile agent in the real applications, the security issues must be addressed. We deal with the problem which is concerned with protecting a mobile agent in transit and detecting a mobile agent clone. In this paper we propose a trust center based secure mobile agent transfer protocol. This protocol transfers a mobile agent securely from host to host and detects a mobile agent clone. We further show the security of the protocol against many attacks.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5S
• /
• pp.1657-1665
• /
• 2000

Mobile agents based e-commerce system has many advantage than traditional e-commerce-information gathering on goods, price settlement and payment, delivery of the goods purchased, and so on. However, due to the security vulnerability that stems from mobile agent's mobility, mobile agents based e-commerce system has additional security problems. Therefore, in order to do e-commerce securely in th system, first of al the security issues on mobile agents must be addressed. It this paper, we propose a mobile agent transfer protocol that provides confidentiality and integrity of mobile agent in transit and mutual authentication for communicating hosts. We further show the security of the protocol against many possible attacks. Also, we suggest the location management mechanism of mobile agents based on the trust center. This mechanism is capable of finding their locations transparently and detecting mobile agent clones.