• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4B
• /
• pp.323-332
• /
• 2006

In this paper, we consider a WDM based metro ring connecting broadband access networks by using FT-TR (Fixed Transmitter-Tunable Receiver) type access nodes and a new MAC protocol for fair transmission is proposed. The basic channel access scheme is CSMA/CA(Carrier Sense Multiple Access with Collision Avoidance) and the transferred optical slot is changed to be empty slot by SS(Source-Stripping) which drops a packet from ring-rotated slot. This empty slot can be either used to send head-of-line packet in buffer or transmitted to next access node. In former cases, there is the improvement of network throughput, but latter case leads unfairness problem of transmission. Thus the proposed MAC protocol exploits the advantages form tow cases. It gives downstream access nodes chance to use empty slots and limits the unconditional usage of empty slots at upstream access nodes with probability as called p-Persistent MAC protocol. We use a numerical analysis to evaluate bandwidth efficiency and maximum node throughput and compares simulation results in terms of node throughput, fairness factor, transfer delay depending on probability. Under two different FT-TR type architectures for metro ring network the proposed MAC protocol is evaluated and compared.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.407-418
• /
• 2014

As a continuing work of previously conducted standard tension tests, full-scale flexural tests were conducted in this study to assess the structural performance the CJP groove welded joints connecting thick HSA800 plates. Two welding electrodes were available at the time of this experimental research; one was GMAW-based electrode A and the other FCAW-based electrode B. Three full-scale box-type beam specimens with single bevel- and V-groove CJP welded joints were fabricated from 60mm and 25mm thick HSA800 plates according to the AWS-prequalified groove welded joint details. In designing the specimens, all possible limit states like local and lateral torsional buckling were carefully controlled in order to induce flexural plastic yielding or eventual joint fracture. All the CJP joints made by both welding electrodes showed satisfactory performance and were able to transfer the tensile flange forces higher than that corresponding to the measured tensile strength of HSA800 flange plates. However, it should be noted that, during fabrication, serious concerns about the welding efficiency and workability of the GMAW-based electrode were raised by a certified welder. The fracture occurred at the unbeveled (or vertical) interface between the weldment and the base metal when the GMAW-based electrode was used in the single-bevel joint, implying the possibility of insufficient melting. Thus, the FCAW-based electrode B is again recommended as the choice of welding electrode for HSA800 plates. The limited test data of this study implies that the V-groove CJP joint should be used in favor of the single bevel CJP joint, if possible.

• Journal of Environmental Health Sciences
• /
• v.38 no.1
• /
• pp.8-17
• /
• 2012

Objectives: Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) are man-made, persistent global pollutants widely diffused throughout the environment. They have been even found in the cord blood and breast milk of humans. Furthermore evidence of developmental toxicity in animals exists. To assess the distribution of maternal and fetal exposure to PFOS and PFOA, we analyzed paired maternal blood, cord blood and breast milk samples. Methods: Maternal blood, cord blood and breast milk were collected from 150 volunteers from the general population (aged 20-40, mean $30.5{\pm}2.9$) of the city of Busan in 2009-2010. The samples were extracted using the weak anion exchange and solid-phase extraction methods and quantified by high-performance liquid chromatograph (HPLC, Agilent 1200 Series) coupled with an Triple Quad LC-MS/MS system (Agilent 6410). Results: Median PFOA and PFOS concentrations in maternal blood were 2.18 and 3.32 ng/ml, in cord blood were 0.83 and 0.58 ng/ml, and in breast milk were 0.13 and 0.11 ng/ml, respectively. PFOS and PFOA concentrations were significantly correlated among matrices (Spearson's ${\rho}=0.226$, p = 0.05 for maternal blood; ${\rho}=0.736$, p < 0.01 for cord blood; ${\rho}=0.493$ p < 0.01 for breast milk). The ratio of cord blood/maternal blood was 0.39 for PFOA and 0.19 for PFOS. The ratio of breast milk/maternal blood was 0.07 for PFOA and 0.06 for PFOS. Conclusions: Our findings suggest that PFOA and PFOS exposure through the placenta was more prominent than through breast milk among Korean neonates born in Busan. The transfer efficiency of maternal blood to breast milk was similar between PFOA and PFOS, but that of maternal blood to cord blood was higher in PFOA than PFOS.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.233-239
• /
• 2014

The slagging which generated from ash deposition on furnace wall and tube in boiler reduces the heat transfer efficiency and damages to safety of boiler. The slag flow behavior in boiler is affected by melting temperature which is related to ash compositions. In this study, the behavior of slag is researched by using ash fusibility test, called TMA (Thermo-Mechanical Analysis). The technique measures the percentage shrinkage as the function of temperature, T25%, T50%, T75%, T90%. These temperatures indicate different stages of melting. Then, the effect of ash chemical compositions measured from XRF (X-ray Fluorescence Spectrometer) to ash fusion temperatures is discussed. Among the chemical compositions, refractory and fluxing influence on ash fusibility is described. High levels of refractory component and limited amount of fluxing components ($Fe_2O_3$, $K_2O$, CaO) increase overall melting temperatures. High $SiO_2/Al_2O_3$ ratio decrease high melting temperatures (T75%, T90%). Meanwhile, the presence of reasonable levels of fluxing components reduces overall melting temperature. A presence of fluxing component such as $K_2O$ and CaO is found to decrease the T25% values significantly. From this research, it is possible to make a reasonable explanation and prediction of ash fusion characteristic from analysis of TMA results and ash chemical compositions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.4 no.1
• /
• pp.29-65
• /
• 2009

This study is The Effect of the on the purchase behavior of the Software Quality. To have purchased the software in a Consumer surveys were conducted. The following is a summary of results of this research. First, the software quality and significant consumer purchasing behavior (+) of influence. Functionality, usability, portability of software quality attributes the impulse buying and buy more of both the (+) showed the influence. Second, software quality is urge consumers to purchase significant (+) of influence. Functionality, reliability, usability, portability of software quality (+) showed the influence. Third, the software quality In the consumer buy more significant Chung (+) showed the influence. Software quality, functionality, usability, portability name (+) influence. In conclusion, the quality of the software in consumer purchasing behavior (+) were of significant influence. In particular, factors that functionality, usability factors, portability factor in the relatively large influence on the purchasing behavior. Software technology development, planning, development, testing, and in each step must keep in mind the following. First, the software, when used in certain conditions, Inherent ability to meet the needs and requirements set forth to provide the appropriate functionality and accuracy as the ability of software products each other with the capabilities to the effective and thorough security features should be required. Second, software, a user-specified criteria to use in understanding and learning, and must, and the ability to prefer. Software for users to understand and easy to use, whether the check. In particular, understanding the interface, Help understanding, understand the input and output data, and interface consistency, the user information, the message must be equipped and easy to understand. In addition, ease of learning to be self-learning, and help ease of access shall be required. Third, in certain circumstances, a different environment to transfer be equipped with the functionality of the software. Applying data structures and application environment, helping transplant convenience must keep in mind sex.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.633-643
• /
• 2015

In this study, we develop a highly efficient conical-air diffuser that generates fine bubble. By inserting a sufficient number of aerotropic microorganisms with dissolved oxygen from an air diffuser and minimizing the air-channel blockages within the air diffuser, we expect to improve the efficiency and durability of the decomposition process for organic waste. To upgrade the conventional air diffuser, we perform experiments and numerical analysis to develop a conical-type that generates fine bubble, and which is free from nozzle blockage. We complement the air-diffuser design by numerically analyzing the internal air-flow pattern within the diffuser. Then, by applying the diffuser to a mockup bioreactor, we experimentally and numerically study the bubble behavior observed in the diffuser and the 2-phase fluid flow in the bioreactor. The results obtained include statistics of the cord length and increased velocity, and we investigate the mechanisms of the fluid-flow characteristics including bubble clouds. Throughout the study, we systemize the design procedures for the design of efficient air diffusers, and we visualize the fluid-flow patterns caused by bubble generation within the mockup bioreactor. These results will provide a meaningful basis for further study as well as the detection of oxygen transfer and fluid-flow characteristics in real-scale bio-reactors using sets of air diffusers.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.383-394
• /
• 2013

The purpose of this study is to demonstrate, through case studies, the usefulness of utilizing local R&D centers under science and technology ODA programs. For the past few decades, advanced countries have supported ODA projects of developing countries, but there have been negative opinions regarding the results. Through a case study of the black pearl cultivation project between the Korea Institute of Ocean Science & Technology and Micronesia, this study explains the usefulness of actively utilizing Korean R&D centers established and operational in recipient countries. Although black pearl cultivation is not an ODA project, the case study offers valuable insights as it is operated in a similar form and thus highly applicable to future projects. Based on the case study, four implications were derived to ensure the successful operations of science and technology ODA projects in the future. First, there is a need to improve relevance by making use of the technological capacities of local R&D institutes to develop projects that reflect the needs of recipient and donor countries. Second, trust must be established with local communities over the long term in order to enhance the effectiveness and efficiency of project operations. Third, the proportion of science and technology ODA projects must be expanded to acquire sustainability, and more support should be granted to ODA projects involving marine resources, which are an advantage for countries of Micronesia. Lastly, the locals should be offered employment opportunities and regular training programs to allow for the actual transfer of knowledge instead of mere techniques. The implications derived in this study will prove useful in pursuing science and technology ODA projects, especially with Micronesia.

• Journal of the Korean Society of Radiology
• /
• v.1 no.2
• /
• pp.13-22
• /
• 2007

The purpose of this study was to survey a development of the wireless transmission system of medical images for ubiquitous medicine. There have been many changes in medical equipments and medical record medical treatment and medical record within hospital and PACS(Picture Archiving Communication System) which is picture management system for patients can be typical cases. It is difficult to use these automated medical systems unless they are within hospital and in case of rapid image reading in the emergency cases or in absence of doctor, it is difficult to perform it immediately. The present study implemented an image transmission system using CDMA connection so that images in the server can be viewed at any time and in any place. Remote wireless diagnosis based on medical images using PDA is applicable to medical areas that require mobility, and the use of PDA can be an ideal alternative for point of care. The use of PDA enables prompt and accurate access to digital medical images, which in turn reduces medical accidents and improves the quality of medical services through high productivity and efficiency of medical practitioners' works. It also enables quick response to patients' demands and high-quality medical services and, consequently, patients' high satisfaction.

• Journal of Plant Biotechnology
• /
• v.34 no.1
• /
• pp.11-17
• /
• 2007

Previously developed transgenic watermelon rootstocks (gongdae) inserted by CGMMV-CP were examined to test the virus tolerance levels. In the restricted plastic house, the $T_{3}$ watermelon rootstock showed tolerance to CGMMV until 70 days after inoculation on the leaves while the non-transformed watermelon rootstock became susceptible at 20 days after inoculation. In the field, tolerance efficiency of transgenic rootstocks maintained up to 40% at 71 days after contamination with CGMMV in the soil while all of the non-transformed rootstocks became susceptible at 37 days with the same condition. In the same field, transgenic rootstocks showed more tolerance to CGMMV than the non-transformed rootstocks as those were inoculated on the leaves, but it showed only 10 days delay before being susceptible. Therefore, transgenic rootstocks have a characteristic of delay effect against CGMMV susceptibility, rather than resistance character. From $T_{3}$ rootstocks homozygous for the CGMMV-CP horticulturally favorable individuals were selected for further breeding and a transgenic line was finally obtained at the $BC_{1}T_{5}$. A material transfer experiment was conducted to find out if the DNA, RNA or expressed protein in the transgenic rootstocks could move to the grafted scion (non-transformed watermelon, Super-Kumcheon). PCR, northern, and western blot analysis were performed and no evidence of transferring of those materials from rootstock to scion was ever found.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1261-1265
• /
• 2003

Axial piston pumps of bent axis have been commonly used in hydraulic systems because of high pressure level. best efficiency, low shear force on pistons and low operating costs. The other side, they have a few demerits like that they have the relatively high number of moving parts and more discharge pressure ripples. Especially, the discharge pressure ripples bring about vibrations and noises in hydraulic system components such as connecting pipes and control valves, so that these deteriorate the stability and accuracy of the systems. Therefore, the hydraulic systems having the axial piston pumps of bent axis require the methods to reduce the discharge pressure ripples. So, the purpose of this paper is to reduce the discharge pressure ripples by the phase interference of pressure wave and to develope the analysis model of the pumps to predict the discharge pressure ripples. In this paper, the analysis model of the axial piston pumps of bent axis was developed using the AMESim software, and the reliability of that was verified by the comparison with the experimental results. The hydraulic pipeline with a parallel line was used as the method to generate the phase interference of pressure wave. the dynamics characteristics of the hydraulic pipeline with a parallel line were analyzed by a transfer matrix method. the usefulness of the phase interference of pressure wave was investigated through the experiment and simulation. The results from the experiment and simulation said that the phase interference of pressure wave by the hydraulic pipeline with a paralle linel could reduce the discharge pressure wave of the pump well. The analysis model of the axial piston pumps of bent axis developed in this paper and the method of the phase interference by the hydraulic pipeline with a parallel line are expected to be helpful to achieve the design of the pump and to reduce the discharge pressure wave of the pump effectively.