Browse > Article
http://dx.doi.org/10.7781/kjoss.2014.26.5.407

Flexural Tensile Strength of CJP Groove Welded Joints Connecting Thick HSA800 Plates  

Lee, Cheol Ho (Dept. of Architecture, Seoul National University)
Kim, Dae Kyung (Dept. of Architecture, Seoul National University)
Han, Kyu Hong (Dept. of Architecture, Seoul National University)
Park, Chang Hee (Dept. of Architecture, Seoul National University)
Kim, Jin Ho (Steel Structure Research Division, RIST)
Lee, Seung Eun (Steel Structure Research Division, RIST)
Kim, Do Hwan (Steel Structure Research Division, RIST)
Publication Information
Journal of Korean Society of Steel Construction / v.26, no.5, 2014 , pp. 407-418 More about this Journal
Abstract
As a continuing work of previously conducted standard tension tests, full-scale flexural tests were conducted in this study to assess the structural performance the CJP groove welded joints connecting thick HSA800 plates. Two welding electrodes were available at the time of this experimental research; one was GMAW-based electrode A and the other FCAW-based electrode B. Three full-scale box-type beam specimens with single bevel- and V-groove CJP welded joints were fabricated from 60mm and 25mm thick HSA800 plates according to the AWS-prequalified groove welded joint details. In designing the specimens, all possible limit states like local and lateral torsional buckling were carefully controlled in order to induce flexural plastic yielding or eventual joint fracture. All the CJP joints made by both welding electrodes showed satisfactory performance and were able to transfer the tensile flange forces higher than that corresponding to the measured tensile strength of HSA800 flange plates. However, it should be noted that, during fabrication, serious concerns about the welding efficiency and workability of the GMAW-based electrode were raised by a certified welder. The fracture occurred at the unbeveled (or vertical) interface between the weldment and the base metal when the GMAW-based electrode was used in the single-bevel joint, implying the possibility of insufficient melting. Thus, the FCAW-based electrode B is again recommended as the choice of welding electrode for HSA800 plates. The limited test data of this study implies that the V-groove CJP joint should be used in favor of the single bevel CJP joint, if possible.
Keywords
High-strength steel; Thick plate; Weldability; Flexural-tensile test; CJP weld; GMAW; FCAW;
Citations & Related Records
Times Cited By KSCI : 5  (Citation Analysis)
연도 인용수 순위
1 Lee, C.H., Han, K.H., Uang, C.H., Kim, D.K., Park, C.H., and Kim, J.H. (2013) Flexural Strength and Rotation Capacity of I-Shaped Beams Fabricated From 800-MPa, Journal of Structural Engineering, ASCE, Vol.139, No.6, pp.1043-1058.   DOI
2 이철호, 한규홍, 김대경, 박창희, 김진호, 이승은, 하태휴 (2012) 800MPa급 고강도강 보 부재의 국부좌굴 및 비탄성거동, 한국강구조학회논문집, 한국강구조학회, 제24권, 제4호, pp.479-490. Lee, C.H., Han, K.H., Kim, D.K., Park, C.H., Kim, J.H., Lee, S.E., and Ha, T.H. (2012) Local Buckling and Inelastic Behaviour of 800 MPa High-Strength Steel Beams, Journal of Korean Society of Steel Construction, KSSC, Vol.24, No.4, pp.479-490.
3 이철호, 김대경, 한규홍, 김진호, 이승은, 하태휴(2012) 고강도강재 단주의 압축강도 및 잔류응력 평가, 한국강구조학회논문집, 한국강구조학회, 제24권, 제1호, pp.23-34. Lee, C.H., Kim, D.K., Han, K.H., Kim, J.H., Lee, S.E., and Ha, T.H. (2012) Compressive Strength and Residual Stress Evaluation of Stub Columns Fabricated of High Strength Steel, Journal of Korean Society of Steel Construction, KSSC, Vol.24, No.1, pp.23-34.
4 유정한, 김주우, 양재근, 강주원, 이동우(2013) 국부좌굴을 고려한 건축구조용 고성능강(HSA800) 조립각형강관 압축재의 적용성 평가, 한국강구조학회논문집, 한국강구조학회, 제25권, 제4호, pp.431-440. Yoo, J.H., Kim, J.W., Yang, J.G., Kang, J.W., and Lee, D.W. (2013) Evaluation on Applicability of Built-up Square Tubular Compression Members Fabricated with HSA800 High Performance Steel Considering Local Buckling, Journal of Korean Society of Steel Construction, KSSC, Vol.25, No.3, pp.223-231.
5 이강민, 이명재, 오영석, 김태수, 김도환(2013) 중심압축력을 받는 건축구조용 고성능강(HSA800) 용접H형 단주의 국부좌굴거동, 한국강구조학회논문집, 한국강구조학회, 제25권, 제4호, pp.431-440. Lee, K.M., Lee, M.J., Oh, Y.S., Kim, T.S., and Kim, D.H. (2013) Local Buckling Behavior of Stub H-shaped Columns Fabricated with HSA800 High Performance Steels under Concentric Axial Loading, Journal of Korean Society of Steel Construction, KSSC, Vol.25, No.4, pp.431-440.
6 이철호, 김대경, 한규홍, 박창희, 김진호, 이승은, 김도환 (2013) HSA800 후판재의 맞댐용접부 인장강도 실험, 한국강구조학회논문집, 한국강구조학회, 제25권, 제4호, pp. 431-440. Lee, C.H., Kim, D.K., Han, K.H., Park, C.H., Kim, J.H., Lee, S.E., and Kim, D.H. (2013) Tensile Testing of Groove Wolded Joints Joining Thick-HSA800 Plates, Journal of Korean Society of Steel Construction, KSSC, Vol.25, No.4, pp.431-440.
7 AISC (2010) Specification for Structural Steel Buildings, American Institute of Steel Construction, Inc., Chicago, Illinois, USA.
8 AWS(2010) AWS D1.1/D1.1M-2010 Structural Welding Code-steel, AWS, Miami, FL.
9 KS(2008) KS B 0802:2003, 금속 재료 인장 시험 방법. KS B 0802 Method of Tensile Test of Metallic Materials.