• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.593-603
• /
• 1997

Connection admission decision in ATM networks requires decision made in real time using fast algorithm. It is difficult to construct a model of the multiplexed traffic and thus, approximation of the traffic load is necessary. In this paper, we propose a measurement-based dynamic CAC(Connection admission Control) in ATM(Asynchronous Transfer Mode) networks, which observes current traffic by the moving window and set the window size to the value which is computed from the measured cell loss amount. It is based on the measurements of the traffic load over an admission period that is load enough to reflect the current traffic behavior instead of analytic modeling. And, the dynamic reallocation of bandwidth for each class leads to effective bandwidth utilization. The performance of proposed method is analyzed through computer simulation. The performance of proposed method is analyzed by using SIMAN simulation package and FORTRAN language. As can be seen in the simulation result, cell loss performance and bandwidth utilization have been increased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.775-779
• /
• 2001

In optical disk drive (ODD), disk rotation speed has been increasing rapidly to achieve high data transfer rate. High servo bandwidths for focusing and tracking actuator are required to follow dynamic disturbance by high rotation speed in ODD. However, the servo bandwidth is significantly limited by some vibration modes which are induced by the flexibility of moving part. In this work, the vibration modes affecting bandwidth of actuators are suppressed by modifying actuating force by VCM. For this, the relation between the horizontal component of the actuating force and vibration mode is analyzed and force characteristic affecting to vibration mode is obtained through electromagnetic and structural analysis using simulation program.

• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.2
• /
• pp.33-40
• /
• 2018

In an environment with a large network bandwidth, maximizing bandwidth utilization is an important issue to increase transmission efficiency. End-to-end transfer efficiency is significantly influenced by factors such as network, data transfer nodes, and intranet network security policies. Science DMZ is an innovative network architecture that maximizes transfer performance through optimal solution of these complex components. Among these, the data transfer node is a key factor that greatly affects the transfer performance depending on storage, network interface, operating system, and transfer application tool. However, tuning parameters constituting a data transfer node must be performed to provide high transfer efficiency. In this paper, we propose a method to enhance performance through tuning parameters of 100Gbps data transfer node. With experiment result, we confirmed that the transmission efficiency can be improved greatly in 100Gbps network environment through the tuning of Jumbo frame and CPU governor. The network performance test through Iperf showed improvement of 300% compared to the default state and NVMe SSD showed 140% performance improvement compared to hard disk.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.20-25
• /
• 2004

The existing antenna that equipped with Micro Aerial Vehicle, microstrip antenna only can send and receive image signal because of limited bandwidth. But, proposed antenna that equipped with Micro Aerial Vehicle flight introduces tapered type patch antenna, also improves bandwidth then can transfer present location, altitude, movement speed. Furthermore, as a result of introduce stacked type, it transfers more quality of image signal, and represents most suitable performance in Korean peninsula that has many mountain peaks. In this paper, to transmit and receive the wideband signals with a antenna system, the wideband microstrip antenna is proposed and designed. This antenna operates at 2.4GHz. In this thesis, the resonance frequency of 2.4GHz and the reflective loss of the antenna of -22dB were calculated by measuring the fabricated Tapered Microstrip Patch Antenna which was designed with the resonance of 2.4GHz. The calculated gain and efficiency of antenna were 6.7dB and $60\%$ respectively. The characteristic of the bandwidth shows with $50\~60MHz$ which is $6.02\%$ at the basis of -l5dB reflective loss. The experimental results can be used in the characteristic of the resonators and this antenna produces a greatly enhanced bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1861-1866
• /
• 1999

ISDN provides mB+1D channel to users. An AO/D1 scheme means D-channel can be used for a permanent low speed connection. When user needs more bandwidth for high speed transfer, the AO/D1 scheme automatically provide greater capacity in the shape of ISDN B-channels. In this paper, we analyze the performance of the AO/D1 scheme with multiple ON-OFF sources in ISDN. We consider multiple ON-OFF sources connected through mB+1D ISDN link. Without the AO/D1 scheme, the required bandwidth will be the sum of peak bandwidth of all sources. With the implementation of the AO/D1 scheme, the required bandwidth is reduced to what is really needed.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.125-128
• /
• 2001

Nowadays, Internet users are widespread internationally. Fallowing the users requirements, server has to transfer real-time multimedia data to many clients. Multicast can significantly reduce the system overhead and the network resource waste, so it supports efficient mechanism when server has to transfer same data to many clients. We can deliver multimedia data transfer in real-time using Patching Algorithm which has no delay for service request. And multicast algorithm can support different network bandwidth using Receiver driven Layered Multicast under heterogeneous environment network. The purpose of this paper is to suggest an algorithm that can create new multicast group adequately and transfer real-time multimedia data efficiently under heterogeneous environment.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.6
• /
• pp.271-278
• /
• 2008

The electro-mechanical characteristics were theoretically analyzed for the wideband ultrasonic transducer made of non-uniform thickness piezoelectric vibrator. This paper proposes a combination of exponential functions which describes the thickness variation along the length of the vibrator to derive the input admittance and power transfer function of the transducer. The bandwidth and the power transfer function of the transducer were investigated while the lateral shape of the vibrator changes. The results showed there is an optimum shape for the wideband characteristics of the transducer, and the bandwidth has increased up to over 100% as the ratio of minimum value of thickness to maximum value decreases. However, the power transfer function had a downward trend as the ratio of thickness decreases. Also we confirmed that even though the value of transfer function increases as the length of the piezoelectric vibrator increases, the shape providing wideband characteristics is very limited. It means that precision processing is required to manufacturing a wideband ultrasonic transducer with high efficiency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.359-365
• /
• 2018

Herein, electromagnetic shielding structures to reduce the external noise coupling to printed spiral coils (PSCs) and a design method for improving the bandwidth of shielded PSCs have been proposed. It has been demonstrated that the bandwidth of shielded PSCs is limited due to the parasitic capacitance between the coils and the shielding structures and is confirmed by the transfer function simulation of the shielded PSCs with a transmission line as the radio-frequency interference noise source. A design method for the bandwidth improvement of the shielded PSCs has been proposed based on the equivalent circuit model analysis and the case studies depending on PSC designs with a three-dimensional field simulation. With the design method, an optimized shielded PSC design has been presented and successfully confirmed by experimental verification in that the optimized design results in a significant bandwidth improvement.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.3011-3018
• /
• 2000

On ATM networks, ABR services are provided using the remained bandwidth after allocating CBR and VBR traffic. Realtime services such as transmitting audio or video data may be provided using CBR and VBR which have a constrained transmission delay, but in these cases, the communications bandwidth may be wasted. This paper proposes an efficient bandwidth allocation algorithm to transfer real-time data using ABR service. The proposed algorithm guarantees MCR and allocates bandwidth to each connection proportional to its MCR. The proposed algorithm divides the connections in two groups - a satisfied state group and a bottlenecked state group - and enhances bandwidth utilization by allowing the remained bandwidth after allocating the connections in the satisfied state to be allocated to the connections in the bottlenecked state. Our algorithm uses a Queue control function proposed by Ghani[5] to keep the Queue length within some boundary, which makes the transmission delay constant. We simulate and compare the performance of the proposed algorithm with that of the algorithms proposed by ATM Forum[1] and Kalampoukas[2].

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.52-66
• /
• 2010

Since large objects consume substantial resources, web proxy caching incurs a fundamental trade-off between performance (i.e., hit-ratio and latency) and overhead (i.e., resource usage), in terms of caching and relaying large objects to users. This paper investigates how and to what extent the current dedicated-server based web proxy caching scheme is affected by large file transfers in a high bandwidth campus network environment. We use a series of trace-based performance analyses and profiling of various resource components in our experimental squid proxy cache server. Large file transfers often overwhelm our cache server. This causes a bottleneck in a web network, by saturating the network bandwidth of the cache server. Due to the requests for large objects, response times required for delivery of concurrently requested small objects increase, by a factor as high as a few million, in the worst cases. We argue that this cache bandwidth bottleneck problem is due to the fundamental limitations of the current centralized web proxy caching model that scales poorly when there are a limited amount of dedicated resources. This is a serious threat to the viability of the current web proxy caching model, particularly in a high bandwidth access network, since it leads to sporadic disconnections of the downstream access network from the global web network. We propose a peer-to-peer cooperative web caching scheme to address the cache bandwidth bottleneck problem. We show that it performs the task of caching and delivery of large objects in an efficient and cost-effective manner, without generating significant overheads for participating peers.