• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.563-566
• /
• 1988

A current-controlled CMOS operational transconductance amplifier(OTA), whose transconductance is directly proportional to the DC bias current, has been developed for many electronic circuit applications. It features that its transconductance is insensitive to temperature unlike that of the bipolar OTA. This property makes it possible to use the proposed OTA as a basic buliding block in electrically variable circuit design. The SPICE simulation shows that the conversion sensitivity of the circuit is 44.62 mv /${\mu}A$ and the linearity error less than 0.54 % over a bias current range from 2 ${\mu}A$ to 120 ${\mu}A$ when the output is loaded with a 1${\Omega}$ resistor.

• ETRI Journal
• /
• 제35권2호
• /
• pp.226-233
• /
• 2013

This paper presents a two-stage power-efficient class-AB operational transconductance amplifier (OTA) based on an adaptive biasing circuit suited to low-power dissipation and low-voltage operation. The OTA shows significant improvements in driving capability and power dissipation owing to the novel adaptive biasing circuit. The OTA dissipates only $0.4{\mu}W$ from a supply voltage of ${\pm}0.6V$ and exhibits excellent high driving, which results in a slew rate improvement of more than 250 times that of the conventional class-AB amplifier. The design is fabricated using $0.18-{\mu}m$ CMOS technology.

• ETRI Journal
• /
• 제42권4호
• /
• pp.534-548
• /
• 2020

This study presents a new architecture for a field programmable analog array (FPAA) for use in low-frequency applications, and a generalized circuit realization method for the implementation of nth-order elliptic filters. The proposed designs of both the FPAA and elliptic filters are based on the operational transconductance amplifier (OTA) used in implementing OTA-C filters for biopotential signal processing. The proposed FPAA architecture has a flexible, expandable structure with direct connections between configurable analog blocks (CABs) that eliminates the use of switches. The generalized elliptic filter circuit realization provides a simplified, direct synthetic method for an OTA-C symmetric balanced structure for even/odd-nth-order low-pass filters (LPFs) and notch filters with minimum number of components, using grounded capacitors. The filters are mapped on the FPAA, and both architectures are validated with simulations in LTspice using 90-nm complementary metal-oxide semiconductor (CMOS) technology. Both proposed FPAA and filters generalized synthetic method achieve simple, flexible, low-power designs for implementation of biopotential signal processing systems.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.143-148
• /
• 2015

In this paper a new method is proposed for realizing active floating inductors from voltage differencing transconductance amplifier(VDTA) which is being studied nowadays. This proposed method employs only one VDTA and one transconductance for designing an active inductor from a passive floating inductor and implementing it to integrated circuits. The number of CMOS transistors can be considerably reduced from 6~18 as 1~3 gm circuits can be eliminated and even without R the design can be made, which can help in reducing the size of the circuit and power consumption. The proposed VDTA floating inductor was successfully used in constructing 1 MHz second order biquad active bandpass filter and bandwidth could be adjusted from 77kHz~1.59MHz by the changes made in gm from 6uS~20uS.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.135-141
• /
• 1994

A linear BiCMOS operational transconductance amplifier (OTA) is described. It consists of a CMOS linear transconductor and a bipolar translineear current gain cell followed by three CMOS current mirrors. The proposed circuit has comparable linearity and temperature stability but superior dc characteristics to its bipolar counterpart. A test circuit with a transconductance of 47.3$\mu$s has been simulated. Simulation results show that a linearity error of less than $\pm$1 percent over an input volgate range from -1.0 to 1.0 V and a output dc offset current as small as-3.6 nA can be obtained.

• 전기전자학회논문지
• /
• 제12권3호
• /
• pp.167-171
• /
• 2008

저항형 센서 브리지를 인터페이싱 하기 위한 저항 편차-주파수 변환기를 제시하였다. 이 변환기는 선형 연산 트랜스컨덕턴스 증폭기(linear operational transconductance amplifier: LOTA)와 전류-제어 발진기(current-controlled oscillator: CCO)로 구성된다. 제시된 변환기를 상업용 개별 소자들을 이용하여 SPICE 시뮬레이션 하였다. 시뮬레이션 결과는, 변환기가 16.90 kHz/${\Omega}$의 변환 감도와 ${\pm}$0.03 %의 최대 선형 오차를 가진다는 것을 보여준다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.185-188
• /
• 2001

This paper proposes an error amplifier circuit using OTA(Operational Transconductance Amplifier) which is the main constituent element in pulse width modulation circuit. The proposed OTA error amplifier circuit is featured by simple circuit configuration, excellent high frequency characteristics and bias current controlled output. Through the experiment of pulse width modulation circuit, the validity of the operation of the OTA error amplifier circuit is verified.

• ETRI Journal
• /
• 제29권6호
• /
• pp.785-793
• /
• 2007

In this paper, we present an integrated rail-to-rail fully differential operational transconductance amplifier (OTA) working at low-supply voltages (1.5 V) with reduced power consumption and showing high DC gain. An embedded adaptive biasing circuit makes it possible to obtain low stand-by power dissipation (lower than 0.17 mW in the rail-to-rail version), while the high DC gain (over 78 dB) is ensured by positive feedback. The circuit, fabricated in a standard CMOS integrated technology (AMS 0.35 ${\mu}m$), presents a 37 V/${\mu}s$ slew-rate for a capacitive load of 15 pF. Experimental results and high values of two quality factors, or figures of merit, show the validity of the proposed OTA, when compared with other OTA configurations.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1987년도 추계학술발표회 논문집
• /
• pp.231-235
• /
• 1987

• 정보와 통신
• /
• 제4권4호
• /
• pp.469-483
• /
• 1987