• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1624-1633
• /
• 2009

철도차량의 제동장치란 차량의 운동에너지를 열 에너지로 변환시켜 대기중으로 방출시킴으로써 차량의 속도를 감속하거나 멈추게 하기 위해 설치한 장치로써 철도차량의 안전한 승객 및 화물 운송을 위하여 제동시스템의 성능 확인은 운영처의 주된 관심사가 되고 있다. 또한 일부 운영처는 차량에 적용된 제동시스템의 성능 지표인 제동중량 (Braked Weight) 값을 차량 외환에 기입하도록 요구하는 등의 제동시스템 성능입증은 중요한 요소가 되고 있다. 특히 해외 수출된 이란동차는 편성당 2개의 디젤 엔진(800HP)을 추진 동력원으로 하여 이란현지 승객을 운송할 목적으로 제작, 운영되고 있는 4량 l편성의 디젤동차 (Diesel Multiple Unit, 이하 DMU)이며 적용된 제동의 종류는 운전자의 제동핸들(Mascon) 조작으로 발생한 제동지령이 제동제어장치(BCU) 전달되어 발생되는 제동인 주제동(Direct Brake)과 제동제어장치(BCU) 제어불능 등의 경우에 사용되는 백업(Back-Up) 제동인 보조 제동(Indirect Brake)로 구성되어 있다. 주 제동 및 보조 제동의 성능은 운영처의 영업운행 선로에서 규정된 속도에서 규정된 제동거리를 만족하는지의 제동거리 측정시험을 통하여 확인되나, UIC 승인 받은 제동부품으로 시스템을 구현한 이란 동차 보조 제동(Indirect Brake)의 경우 UIC 544-1 규정에 의한 제동중량(Braked Weight) 값을 산출해야 정확한 성능 확인이 된다. 따라서 본 연구에서는 이란동차에 적용된 UIC 보조제동 시스템에 대한 성능을 확인하고자 UIC 544-1에 의거 제동중량(Braked Weight) 값을 산출하고자 한다.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1472-1478
• /
• 2006

Double-deck train has been attracted growing attention as next generation transportation around metropolis because of high passenger carrying capacity. To develop high-speed double-deck train with low operational costs, the carbody must be designed as light as possible. In addition, the carbody must be strong enough to ensure the safety of passengers. To meet these design requirements, we perform systematically weight minimization that determines thickness of aluminum extruded panels of the carbody. First, to reduce the design variables, we carry out the screening process that select sensitive or/and important design variables through design exploration. Then, weight minimization is accomplished under multi-loading condition such as vertical, compressive and torsional loads, while satisfying strength constraints of the design regulations. Finally, the result of design optimization is discussed by comparison with its initial design.

• 한국정밀공학회지
• /
• 제18권6호
• /
• pp.102-108
• /
• 2001

This paper addresses an analytical approach to the mechanical error analysis of gear train and tolerance design and manufacture of gear train in restricted space considering motor driving torque, driving system inertia, motor acceleration, motor rotor inertia and friction torque. The gear train is designed to have optimum gear ratio in restricted space and each gear is manufactured to have the lowest weight and each gear tooth is heat-treated to have robustness. Based on the small difference between the mechanical error analysis and measurement, gear train design with optimum gear ratio and restricted space and robustness is proposed.

• 한국군사과학기술학회지
• /
• 제2권1호
• /
• pp.132-138
• /
• 1999

This paper addresses an analytical approach to the mechanical error analysis of gear train and tolerance design and manufacture of gear train in restricted space considering motor driving torque, driving system inertia, motor acceleration, motor rotor inertia and friction torque. The gear train is designed to have optimum gear ratio in restricted space and each gear is manufactured to have the lowest weight and each gear tooth is heat-treated to have robustness. Based on the small difference between the mechanical error analysis and measurement, gear train design with optimum gear ratio and restricted space and robustness is proposed

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.40-42
• /
• 1999

In this paper, light-weight system of linear induction motor(LIM) for light railway train is presented, and is compared with former type of LIM. For the light-weight system without modification of motor size the material of primary core(silicon steel) is changed with iron-cobalt alloy and the material of primary winding(copper) is changed with aluminium. The characteristics of LIM are analyzed. Specially, the air gap magnetic flux density distribution due to end effect is showed with motor velocity, we will present papers continuously through designing and testing a trial product.

• 한국철도학회논문집
• /
• 제10권3호
• /
• pp.271-277
• /
• 2007

The Korean Tilting Train eXpress (TTX) development program is in progress for the purpose of running speed or passenger's comfort improvement at the curved track. However, the speed up and light weight of train make poor the dynamic safety of the TTX in strong cross wind. In this paper, 3-dimensional numerical analysis on the flow field around the TTX under strong cross wind is performed for each operating condition, such as the train speed, cross wind speed, tilting/nontilting condition, and so on. Due to the strong cross wind, the pressure distribution around the train becomes asymmetric, especially at the leading car. Asymmetrical pressure distribution causes the side force and strong unstability. The side force on the train is proportional to the train speed and cross wind speed. Based on the numerical results, the overturning coefficients are predicted for investigation of the train stability, and all of them are less than the critical value, 0.9. The results in this study would be a good data for providing importance to judgement of cross wind safety of TTX.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1097-1106
• /
• 2007

Rail provides running tract for train and broadly and widely conveys the weight of the train exerted from the train wheels that the rail directly supports onto the cross tie and roadbed, and supports the cross-sectional pressure exerted by centrifugal force at curvatures. That is, stationary rail provides surface on which dynamic train runs and guarantees cross-sectional resistance to enable the vertical snake motion of the train wheels as well as to maintain lateral force at curvatures. Rail provides running surface on which train wheels can run smoothly, and secures vertical and lateral force. However, it undergoes continuous destructive reactions (wearing and damages) and abrasion of the cladding by the train wheels. It is obvious that wearing will result when two metal parts act against each other. However, occurrence of abnormal wearing such as rapid wearing of the rail side due to complex generation of various mechanisms at the contact surface between the rail and train wheel flange. It is not easy to simply examine the causes of occurrence of abnormal wearing of rail and train wheel flange. Although countless number of academicians and specialists are conducting researches on abnormal wearing of rail and vertical wearing of train wheels, I believe it is too early to argue on pros and cons due to insufficiency of officially verified information on the issue. This review will be focusing on the examples of repairs that reduced the generation of abnormal wearing of rail by reviewing and improving characteristics of wearing and slack, speed of the train and cant as well as status of lubricator by choosing the compound curves present in the section between the $Anguk{\sim}Jongno3-ga$ Stations of the Route No. 3 among the compound curve tracks of the Seoul Metro Routes No. 3 & 4 at which abnormal wearing is generated continuously.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.220-223
• /
• 2004

The weight reduction of carbody structures is of great concern in developing high speed tilting train for the normal operation of tilting system. The use of composite materials for the carbody structures has many advantages due to their excellent material properties. In this paper, finite element analysis was conducted to analysis and design the composite structure of Tilting Train eXpress(TTX). According to JIS E 7105, static load tests were performed and the structural safety of the composite carbody structure was verified by conducting finite element analysis of the model to which reinforcing frame are added in the composite carbody structure. In addition, modal analysis was conducted to estimate the natural frequency of a train.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1946-1954
• /
• 2008

In urban railways operated by 10 cars or 8 cars per trainset, passengers split up and board a train. On-board passengers for each car are not aware of congestion level of other cars of the train. Passengers waiting at stations can not predict congestion rate of the car which they get on. Therefore, the number of passengers is not equally distributed. The cars with a relatively low congestion level and the ones with a high level coexist in the train. The objective of this paper is to enhance passenger convenience and improve train operational efficiency through operational headway adjustments according to congestion level of each car. It also aims to spread passengers out evenly and assess the degree of congestion on each car by measuring the weight of each car including passengers during peak and off-peak hours.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2195-2199
• /
• 2008

The concern on sustainable development is increased to solve the global warming which is environmental issue over nations. Sustainable development is the concept of minimizing the consumption of resource and environment burden. In transportation, there are some trials of shifting to green transportation mode through low energy consumption and high efficiency. Korea Tilting Train eXpress (TTX) can run higher speed than existing train and save energy through light weight. In this study, Tilting bogie, the core equipment of tilting train, was compared with that of existing train.