• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.218-225
• /
• 2000

This paper presents intermediate results of an on-going research for identification of the modal and the stiffness parameters of a bridge based on the ambient vibration data caused by the traffic loadings. The main algorithms consist of the random decrement method incorporating band-pass filters for estimation of the free vibration signals the cross spectral density method for identification of the modal parameters and the neural networks technique for estimation of the element-level stiffness changes. An experimental study is carried out on a scaled bridge model with a composite section subjected to various moving vehicle loadings. Vertical accelerations are measured at several locations on the girder. The estimated frequencies and mode shapes are found to be well-compared with those obtained from the impact tests. The estimated stiffness changes using the neural networks are found to be very good for the case with the simulated data. However the accuracy is found to be not quite satisfactory for the case with the experimental data particularly for the small value of the stiffness changes.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.203-209
• /
• 2014

As a sense of practical field, most researchers emphasize the importance of safety management to prevent marine accidents. The purpose of this paper is to develope a new safety evaluation method using Safety Index (SI) which is to measure the emotional feeling of navigation officer by traffic situations. In this study, the questionnaires with SI are used to investigate the degree of sensing levels of navigation officers according to the navigation situations. In addition, the traffic data obtained from AIS (Automatic Identification System) data are used to give actual situations in the questionnaire investigation. As results of questionaries investigations based upon the AIS data, it is shown that the Safety Index can be used as a criterion to determine the safety levels of ship navigating in a coastal areas.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.08a
• /
• pp.119-123
• /
• 2000

In this paper, authors introduce about Wide Range Vessel Traffic Service (VTS) system using Automatic Identification System (AIS). In order to develop the prototype of Wide Range VIS system, Korean satellite is used for data communication system for AIS. In this system, ship position obtained by using GPS is reported automatically to VTS center through Korean satellite. By using this system, VTS center can cover more wide area than the case using radar only. And the uncertainty of information is decrease. The results of test show the good possibility of VTS using satellite and AIS.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2911-2913
• /
• 1999

This paper suggest an optimal identification method to complex and nonlinear system modeling that is based on Fuzzy-Neural Network(FNN). The FNN modeling implements parameter identification using HCM algorithm and optimal identification algorithm structure combined with two types of optimization theories for nonlinear systems, we use a HCM Clustering Algorithm to find initial parameters of membership function. The parameters such as parameters of membership functions, learning rates and momentum coefficients are adjusted using optimal identification algorithm. The proposed optimal identification algorithm is carried out using both a genetic algorithm and the improved complex method. Also, an aggregate objective function(performance index) with weighted value is proposed to achieve a sound balance between approximation and generalization abilities of the model. To evaluate the performance of the proposed model, we use the time series data for gas furnace, the data of sewage treatment process and traffic route choice process.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.3
• /
• pp.256-261
• /
• 2013

The AIS(Automatic Identification System) has been widely used for ship safety at sea over the last 10 years. The AIS traffic load at VDL(VHF Data Link) has been continuously increased. As the traffic load at VDL increases, the quality of AIS service may be deteriorated. In the previous research, the AIS traffic has been analyzed in the major ports of Korea, and its problem due to traffic overload has been suggested. However, no solutions has been given so far. In this paper, the method of autimatically controlling the VDL traffic at AIS base station is represented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.887-892
• /
• 2023

Vessel traffic service(VTS) centers are equipped with RADAR, AIS(Automatic Identification System), weather sensors, and VHF(Very High Frequency). VTS operators use this equipment to observe the movement of ships operating in the VTS area and provide information. The VTS data generated by these various devices is highly valuable for analyzing maritime traffic situation. However, owing to a lack of compatibility between system manufacturers or policy issues, they are often not systematically managed. Therefore, we developed the VTS Bigdata Platform that could efficiently collect, store, and manage control data collected by the VTS, and this paper describes its design and implementation. A microservice architecture was applied to secure operational stability that was one of the important issues in the development of the platform. In addition, the performance of the platform could be improved by dualizing the storage for real-time navigation information. The implemented system was tested using real maritime data to check its performance, identify additional improvements, and consider its feasibility in a real VTS environment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.22-32
• /
• 2002

This paper describes about non-burial AVI (Automatic Vehicle Identification) system using general vehicle as probe car for obtaining more accurate traffic information while conserving road pavement surface. Existing spot traffic detectors have their own limits of not obtaining right information owing to its mathematical method. Burial AVI systems have some defects, causing traffic jam, needing much maintenance cost because of frequent cutting of loop and piezo-electric sensors. Especially, they have hard time to make right detection, when it comes to jamming time. Therefore, in this paper, we propose non-burial AVI system with laser trigger unit. Proposed non-burial AVI system is developed to obtain regional traffic information from normal Passing vehicle by automatic license number recognition technology. We have adapted it to national highway section between Suwon city and Pyong$\~$Taek city(9.5km) and get affirmative results. Vehicle detection rate of laser trigger unit is more than 95$\%$, vehicle recognition rate is 87.8$\%$ and vehicle matching rate is about 14.3$\%$. So we regard these as satisfying results to use the system for traffic information service. We evaluate proposed AVI system by regulation of some institutions which are using similar AVI system and the proposed system satisfies all conditions. For future study, we have plan of detailed research about proper lane number from all of the target lanes, optimal section length, information service period, and data fusion method for existing spot detector.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.447-454
• /
• 2007

To assess the port development and maritime traffic environment, the future traffic volume has been estimated using the number of inbound and outbound vessel for a specific port. The estimation of future traffic volume should be considered as an important factor to establish the degree of fairway congestion, the determination of fairway width and the operational role. Until now, the number of in and out vessel for the port has been only estimated mainly, but the type and size of inbound and outbound ships are different depending on the port's characteristics. So, it is difficult to estimate the future traffic volume using the change of only one item. This paper calculates the future traffic volume using the marine traffic characteristic factors as the number of coastal ship and ocean-going ship, the size of ship and the change of cargo volume per a ship etc. And it compared with the results of Artificial Neural Network(ANN) for accurate identification of nonlinear system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.3
• /
• pp.257-263
• /
• 2013

The classification of risk factors and the identification of risk acceptance criteria are core works to assess risk levels with high enough confidential level in the field of marine traffic environment. In the previous study work, the twenty kinds of risk factors and its assessment criteria for the domestic marine traffic environment were proposed. In this paper, with these previous studying results, the relative importance of the risk factors were analyzed by questionnaire survey of marine traffic experts using the analytic hierarchy process. The analysis results showed that the relative importance of the visibility restriction is the highest among the twenty kinds of risk factors, and the relative importance of the traffic condition is the highest among the five kinds of risk categories. As results from analysis, it is expected that the approaching method on the relative importance is to be one of basic techniques for the development of risk assessment models in the domestic marine traffic environment.

• Journal of Internet Computing and Services
• /
• v.7 no.3
• /
• pp.53-60
• /
• 2006

As it has been continuously increased the volume of traffic over Internet, it is hard for a network traffic monitoring system to analysis every packet in a real-time manner. While it is increased usage of applications which are dynamically allocated port number such as peer-to-peer(P2P), steaming media, messengers, users want to analyze traffic data generated from them. This high level analysis of each packet needs more processing time. This paper proposes to introduce load shedder for limiting the number of packets. After it determines what application generates a selected packet, the packet is analyzed with a defined application protocol.