• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.22-32
• /
• 2013

Since the percentage of vehicles equipped with Hi-pass, an electronic toll collecting device, has increased rapidly, it is very crucial to determine the optimal location of Hi-pass lanes at a toll plaza in terms of traffic control and operation. In this study, the appropriateness of existing Hi-pass lanes of a toll plaza is evaluated considering its physical geometry and traffic characteristics. A new evaluating criterion called "traffic dispersion rate" is developed in order to measure the level of traffic spreading across the toll booth lanes at a toll plaza. Logistic regression models are constructed to estimate the relationship between the traffic dispersion rate and its affecting variables. The model estimation results show that several variables including Hi-pass lane traffic volume, length of toll plaza, entering/exiting taper lengths, and locations of Hi-pass lanes. The results also suggest that traffic dispersion rate can be increased by adjusting the location of Hi-pass lanes. The study enables us to quantify traffic dispersion rate which can be used to optimize the location and operation of Hi-pass lanes at toll plazas.

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.87-96
• /
• 2001

This article proposes traffic dispersion with optical transmission technical and development of transmission rate for the safe multicast computer communication in the high bandwidth, Recently multicast traffic such as distance conference or Internet broadcast increases therefore the importance of traffic dispersion and transmission rate is emphasized. Ultimately this article offers the way of carrying out the above suggestion, First this paper points out traffic problems occurred in voice and text centered transmission. Next, transmission rate can be controlled by optical transmission technic to solve above difficulties in the multimedia and Internet. We investigated the feature and output on Add-Drop Mux/Demux and Also presented charges of length accord each stage in interference. We can show, the best data of design as a result of this experiment.

• Journal of Korean Society of Transportation
• /
• v.6 no.1
• /
• pp.55-64
• /
• 1988

Prior to using any computer model, the program-embedded palameters showing significant differences from real world should be calibrated. This is especially true when the model is expected to be used fro various roadway and traffic condition. The calibration of TRANSYT model was conducted for the parameters of start-up delay, and lag, stop penalty(K), platoon dispersion factor, and saturation flow rate. The values of the parameters were obtained by theoretical methods from actual field measurements for discharging and arrival pattern. The sites elected for the study was an intersection of Dongil-Ro and Hwarang-Ro, and a 334 meter downstrean section from the intersection stop line on westbound Hwarang-Ro. The study results showed that the start-up delay was 2.6 sec, end lag was 1.0 sec, saturation flow rate was 2287 pcphgpl, platoon dispersion factor was 0.2-03, and stop penalty(K) was 32. However, since these parameters re apt to depend on traffic and roadway condition, it is doubtful whether the obtained values will be applicable to the area-wide situation other than this particular site.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.57-71
• /
• 2009

Due to increasing interest in dispersion of traffic flows through providing traffic information, there has been much research of driver behavior and effectiveness of diversion. In this paper the authors intend to analyze how a diversion was determined and its effects through correlation analysis between diversion rates estimated by actual surveys and the traffic conditions. Through speed-flow analysis, the diversion mechanism was found. When travel speed decreased, detour volume increased. Then when the traffic volume was decreased through an increase of diversion and traffic conditions got better, the detour volume decreased again. In addition, the authors found negative correlation between the diversion rate and travel speed through correlation analysis. It shows that there were various relationships between diversion rates and traffic conditions according to congestion level and direction of traffic. Finally, it is suggested that the regression equation for calculating the diversion rate with the traffic flows, travel speed, and travel time as variables has a coefficient of determination of 38.5%. It means that traffic conditions on expressways take about 40% of driver's decision-making for diversion.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.63-72
• /
• 2004

In conducting traffic safety programs, it is very important to identify hazardous sites in appropriate manner. The rate qualify control method is generally used in identifying hazardous sites since it can interpret the sites in the statistic aspects. The rate qualify control method is based on the assumption that the occurrences of traffic crashes follow the Poisson's distribution in which the expected value of traffic crashes equals the variance of those. However, there is greater variability than expected statistically, we call this phenomenon over dispersion. This study analyzed the problem related to the rate quality control method under the over dispersed data, and established a methodology to solve the problem. As a result of test on the basis of the field data, the new approach produced more reasonable results than those of the Poisson based rate quality control method.

• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.79-88
• /
• 2008

VMS based dispersion of traffic flows enables to decrease delay and congestion. Such being the case, there has been growing interests in VMS operation strategy. The strategy is based on driver's behavior or diversion rate. However, it was not easy to obtain each in practice. The diversion rate, thus far, was investigated by stated preference analysis or simulators. As an alternative, in this paper, a new method to obtain diversion flow rate was suggested using the toll collection system and freeway traffic management system data. A large gap of diversion rate between stated preference analysis and field survey was observed. Out of surveyed 8 tollgate data, the diversion rate was about 7% and was quite lower compared with that of 21%${\sim}$87% from stated preference analysis or simulators. With this at hand, a more careful information provision strategy should be devised and employed to correctly account this kind of differences.

• Journal of Environmental Impact Assessment
• /
• v.11 no.2
• /
• pp.67-77
• /
• 2002

Air traffic increased 12% annually in Korea since 1988 after the Olympics, this rate is two times than the rate of the world average. In order to accommodate fast growing aviation demand, Incheon International Airport is operated at Yongjong Island since March, 2001. The Incheon airport project will continue till 2020. After the final phase in 2020, Incheon International Airport will handle 100 million passengers, 530,000 flights and 7 million tons of cargo annually. In this study, air pollution from aircraft and other sources are calculated and assessed in Incheon International Airport area by EDMS(Emission and Dispersion Modeling System), which is a combined emission and dispersion model for airport. EDMS could also be considered power plant, incinerator and aircraft support equipment such as ground support equipment, aerospace ground equipment, auxiliary power units. And EDMS is recommended as preferred model for air quality assessment of the airport area by U.S. EP A. The result of this study shows that NOx emission from aircraft and support utility is estimated as 27,000 - 35,000 ton/yr and Namdong-Gu area in Incheon city is affected as 30-60 ppb by the NOx emission from these sources in 2020, the final phase of Incheon international airport construction.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.223-230
• /
• 2002

In this paper, we induced that the noise powers and bit error rate of direct detection receiver taking account of ISI (intersymbol interference) in the 2,000 km optical transmission system. And we evaluated the sensitivity in the vrious bit rate system. We verified that the proposed calculation method is applicable to the exact optical system. And we confirmed that the signal distortion due to both chromatic dispersion and nonlinear effects compensated by using of MSSI (Mid-Span Spectral Inversion) method, and yet the sensitivity of a higher bit rate system is reduced, because of the increase of ISI and then the decrease of the average receiving power, compared with a the lower bit rate system.

• Smart Structures and Systems
• /
• v.18 no.2
• /
• pp.217-231
• /
• 2016

The present work aims to develop piezoresistive sensors of excellent piezoresistive response attributable to change in nanoscale structures of multi-wall carbon nanotube (MWNT) embedded in cement. MWNT was distributed in a cement matrix by means of polymer wrapping method in tandem with the ultrasonication process. DC conductivity of the prepared samples exhibited the electrical percolation behavior and therefore the dispersion method adopted in this study was deemed effective. The integrity of piezoresistive response of the sensors was assessed in terms of stability, the maximum electrical resistance change rate, and sensitivity. A composite sensor with MWNT 0.2 wt.% showed the lowest stability and sensitivity, while the maximum electrical resistance change rate exhibited by this sample was the highest (96 %) among others and even higher than those found in the literature. This observation was presumably attributed by the percolation threshold and the tunneling effect. As a result of the MWNT content (0.2 wt.%) of the sensor being near the percolation threshold (0.25 wt.%), MWNTs were close to each other to trigger tunneling in response of external loading. The sensor with MWNT 0.2 wt.% was able to maintain the repeatable sensing capability while sustaining a vehicular loading on road, demonstrating the feasibility in traffic flow sensing application.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.939-944
• /
• 2014

Traffic accidents caused by the attention dispersion are increasing and the behavior of the attention dispersion affects the front-observing rate, road keeping ability, and reaction time for a dangerous situation. Many drivers listen to a radio broadcast and they have to change the frequency for continuously listening a radio broadcast of the specific broadcasting station in case of crossing a boundary of the particular area. In this situation, the possibility of a car accident increases, because the attention dispersion of a driver might be occurred. Especially, the risk of a car accident caused by changing the frequency of a radio is more serious in the highway, due to the high speed of a vehicle. In order to reduce the risk of a car accident caused by handling a radio during driving car, in this paper, we propose an automatic frequency conversion algorithm for vehicle radio, which saves normal system frequencies of primary broadcasting stations in a database and determines new frequency of the changed area using the location information obtained from a navigation system in a boundary of the specific area. After determining new frequency, the proposed algorithm selects a frequency with better receiving rate comparing signal-to-noise ratios (SNRs) of two signals corresponding previous and new frequencies.