• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.4
• /
• pp.785-796
• /
• 2000

In this study, the possibility of application of TUNVEN model was investigated through the validation and calibration processes. In order to validate and calibrate the TUNVEN model developed in USA to obtain prediction of the quasi-steady state longitudinal air velocities and the pollutants concentrations by solving the coupled one-dimensional steady state tunnel aerodynamic and advection equations. The major input parameters such as the concentration data for CO and $NO_x$, meteorological data and traffic volume in Hawngryung tunnel were measured. Prior to preparing the input parameters, the sensitivity analysis was conducted to identify the input parameters which need to be most accurately estimated in TUNVEN program. In order to establish the relationships between the model values and the measured values, the linear regression analysis was applied. In linear regression analysis, the model values were taken as independent parameter(X) and the measured values were taken as dependent parameter(Y) for four cases of data sef. From the results of linear regression analysis, the correlation coefficient(r) for four cases were calculated more than 0.91 and the values of slope and interception were analyzed as 0.5~2.2 and 0.01~2.3 respectively. From the above results, we concluded that the suitability of TUNVEN model was identified in prediction the longitudinal pollutant concentrations in tunnel.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.22-28
• /
• 2020

In this study, quantitative risk assessment was carried out for city gas high-pressure pipelines crossing through urban rivers. The risk assessment was performed based on actual city gas properties, traffic volume and population and weather data in the worst case scenario conditions. The results confirmed that the social and individual risks were located in conditionally acceptable areas. This can be judged to be safer considering that the risk mitigation effect of protecting the pipes or installing them in the protective structure at the time of the construction of the river buried pipe is not reflected in the result of the risk assessment. Also, SAFETI v8.22 was used to analyze the effects of wind speed and pasquil stability on the accident damage and dispersion distances caused by radiation. As a result of the risk assessment, the safety of the pipelines has been secured to date, but suggests ways to improve safety by preventing unexpected accidents including river bed changes through periodic inspections and monitoring.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.3
• /
• pp.459-475
• /
• 2008

This study analyzes the network structure of the Metropolitan Seoul subway system by applying complex network analysis methods. For the purpose, we construct the Metropolitan Seoul subway system as a network graph, and then calculate various indices introduced in complex network analysis. Structural characteristics of Metropolitan Seoul subway network are discussed by these indices. In particular, this study determines the shortest paths between nodes based on the weighted distance (physical and time distance) as well as topological network distance, since urban travel movements are more sensitive for them. We introduce an accessibility measurement based on the shortest distance both in terms of physical distance and network distance, and then compare the spatial structure between two. Accessibility levels of the system have been getting up overall, and thus the accessibility gaps have been getting lessen between center located subway stops and remote ones during the last 10 years. Passenger traffic volumes are explored from real passenger transaction databases by utilizing data mining techniques, and mapped by GIS. Clear differences reveal between the spatial patterns of real passenger flows and accessibility. That is, passenger flows of the Metropolitan Seoul subway system are related with population distribution and land use around subway stops as well as the accessibility supported by the subway network.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.214-215
• /
• 2013

Current competition among companies than regional, the time constraints, it is globalization, Tilt the efforts of many to be operated by building the efficient distribution system to reduce logistics costs and improve customer service it is reality's there. Therefore, the need for industrial complexes environmentally friendly can be cost competitive companies perform cavitation region's increased. To build the distribution center these logistics system through a joint of freight and appropriate policy is required. In particular, efficient operation through the system construction of industrial complexes in the logistics system is very important in terms of friendly low-cost urban logistics, the environment. Since the traffic volume which is Jipufa and utilization of network is transported by a more appropriate technicians and means suitable operating model can efficiency is improved. However, despite these advantages, research network design has not been actively conducted due to the complexity of the problem. Therefore, in this study, by analyzing the logistics system, and presents the operating model through a simulation and basic settings for the model of the logistics complex based on the analysis result, the construction of infrastructure of logistics industry complex it is intended to present the article.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2216-2222
• /
• 2014

A recent trend of increasing container traffic volume using reefer container demands continuous management of reefer container in transit. However, reefer containers can only be monitored at terminal or in ship during marine transportation instead of throughout entire section. In the case of inland transportation section using truck or train, monitoring is not possible currently. The reason is because the reefer container monitoring method using PCT recommended by IMO and conventional monitoring methods using TCP/IP, RFID communication require establishing additional communication infrastructure. This paper will propose a new reefer container control device that not only solves these problems and monitors during inland transportation section but also controls reefer container. Using data port attached to every reefer container, the proposed device collects the information of reefer container and using M2M communication technology, it transmits information to server without the need to establish additional communication infrastructure. In addition, it can control the operational status of reefer container upon receiving control information set in server such as temperature of reefer container.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.847-854
• /
• 2001

The Web continues to grow fast rate in both a large aclae volume of traffic and the size and complexity of Web sites. Along with growth, the complexity of tasks such as Web site design Web server design and of navigating simply through a Web site have increased. An important input to these design tasks is the analysis of how a web site is being used. The is paper proposes a Page logging System(PLS) identifying reliably user sessions required in Web mining system PLS consists of Page Logger acquiring all the page accesses of the user Log processor producing user session from these data, and statements to incorporate a call to page logger applet. Proposed PLS abbreviates several preprocessing tasks which spends a log of time and efforts that must be performed in Web mining systems. In particular, it simplifies the complexity of transaction identification phase through acquiring directly the amount of time a user stays on a page. Also PLS solves local cache hits and proxy IPs that create problems with identifying user sessions from Web sever log.

• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.234-246
• /
• 2017

The Seoul metropolitan government introduced the bus information systems, bus rapid transit to increase travel speed and punctuality but still suffer from insufficiency. This paper delivers a study verifying the external factors at near the bus stops. The dependent variable was set to the standard deviation of (1) travel time and (2) travel time to and from the bus stop in this study. The independent variables were set to (1) the number of routes, (2) traffic volume by bus type, (3) the number of bus bays, (4) the possibility of passing, (5) the distance to crosswalks and intersections, and (5) the presence of residential road. The results showed that the most significant factors included the link section speed, number of bus bay, distance to crosswalk, and the possibility of passing.

• Journal of Korean Society of Transportation
• /
• v.35 no.3
• /
• pp.197-209
• /
• 2017

With the advent of age that people spend more time and money on leisure activities, there is increasing interest in professional sport games. The location of large scale sport facilities has substantial impacts on existing transportation pattern because the facility attracts and generates massive traffic volume within a short period of time. This study aims to develop a mode choice model of leisure trips of which the destinations are a sport facility. A structured SP (stated preference) survey questionnaires were developed through an experimental design, and professional sport spectators were asked to state their preference in the choice of transport mode to the sport facility. The survey results show that public transportation is preferred to passenger cars for their trip to big sports event, implying that the convenience of back home trip after the event is an important factor of their mode choice. This study is a rare research on the trip pattern to sports complex in Korea, which provides policy implications on the provision of mass transit including subway system to large scale sport complexes. And it is also expected that this study contributes to future researches on leisure trip pattern.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.675-687
• /
• 2019

In recent years, the needs for double deck-tunnels have increased in large cities due to the increase in traffic volume and high land compensation costs. In Korea, a network type tunnel which is smaller than general road tunnels and crosses another tunnel underground is planned. In the shield tunnel joints between the existing shield tunnel and the box-type enlargement section, a partial steel-concrete joint is proposed where the bending moment is large instead of the existing full-section steel joint. In order to analysis the enlargement section of the shield tunnel diverged section to reflect the three-dimensional effect, the two-dimensional analysis model is considered to consider the column effect and the stiffness effect of the longitudinal member. A two-dimensional analysis method is proposed to reflect the stiffness of the longitudinal member and the column effect of the longitudinal point by considering the rigidity of the longitudinal member as the elastic spring point of the connecting part in the lateral model. As a result of the analysis of the model using the longitudinal member, it was considered that the structural safety of the partial steel-concrete joint can be secured by reducing the bending moment of the joint and the box member by introducing the longitudinal member having the stiffness equal to or greater than a certain value.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.272-278
• /
• 2018

Traffic volume has been greatly increasing due to urban development and the improvement of living standards, and many complaints are being raised due to the increasing road noise. As a countermeasure against these problems, highly soundproof walls are installed on the sides of roads. However, the ability to bear wind loads is a major design requirement for soundproof walls, which contributes to the exponential increases in construction costs and restricts the height of the walls. The aim of this study is to improve the performance of soundproof walls and to dramatically reduce wind loads while maintaining excellent price competitiveness. Based on Helmholz's resonator theory, a new concept is proposed for a ventilation-type soundproofing plate that can pass through a fluid like air and reduce noise. A full-scale metal soundproofing plate was produced to satisfy the quality standards of highways by conducting a sound-pressure transmission-loss test, wind tunnel test, and material quality test. To verify the reliability, the wall was manufactured and installed, and the sound insulation effect was examined by measuring the noise over time. In the future, ventilated soundproof walls on roads could create a pleasant living environment due to the high noise-insulation effect.