• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1450-1470
• /
• 2023

In a Vehicular Cloud (VC) network, an announcement protocol plays a critical role in promoting safety and efficiency by enabling vehicles to disseminate safety-related messages. The reliability of message exchange is essential for improving traffic safety and road conditions. However, verifying the message authenticity could lead to the potential compromise of vehicle privacy, presenting a significant security challenge in the VC network. In contrast, if any misbehavior occurs, the accountable vehicle must be identifiable and removed from the network to ensure public safety. Addressing this conflict between message reliability and privacy requires a secure protocol that satisfies accountability properties while preserving user privacy. This paper presents a novel announcement protocol for secure communication in VC networks that utilizes group signature to achieve seemingly contradictory goals of reliability, privacy, and accountability. We have developed the first comprehensive announcement protocol for VC using group signature, which has been shown to improve the performance efficiency and feasibility of the VC network through performance analysis and simulation results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.619-620
• /
• 2011

When we choose a car, must first choose the performance, design, price, reliability, ete. of the car regardless of the probability of occurrence of traffic accidents. This paper proposes the color of car that accident occurs in color from the highest probability to lowest probability. This is talking about the color difference of advancing color and receding color. The color of the accident-prone is many receding color that actually seem to be far more. Advanced color that seem to be closer than the actual color find out that accident is less.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.7
• /
• pp.1437-1447
• /
• 1997

This paper proposes a cluster-based PCS(Personal Communication Services) network architecture to support increased signaling and control traffic. The procedures are presented to serve the mjobility management and the efficient procesing of the call-control functional using distributed servers. Especially when call-setups are made within a cluster, this distributed servers. Especially when call-setup time and the amount of control traffic of H-HLS (High level Home Location Server) in the network as L-HLS(Low lever Home Location Server) serves the call on behalf of H-HLS. Performance and reliability of the architecture have been also cairried out.

• Journal of Korean Society of Transportation
• /
• v.27 no.2
• /
• pp.133-144
• /
• 2009

In Korea, the ITS project has been progressed to improve traffic mobility and safety. Further, it is to relieve traffic jam by supply real time travel information for drivers and to promote traffic convenience and safety. It is important that the traffic information is provided accurately. This study was conducted outlier elimination and missing data adjustment to improve accuracy of raw data. A method for raise reliability of travel time prediction information was presented. We developed Historical Profile model and adjustment formula to reflect quality of interrupted flow. We predicted travel time by developed Historical Profile model and adjustment formula and verified by comparison between developed model and existing model such as Neural Network model and Kalman Filter model. The results of comparative analysis clarified that developed model and Karlman Filter model similarity predicted in general situation but developed model was more accurate than other models in incident situation.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.119-128
• /
• 2021

The most typical method to generate traffic information is installing vehicle detectors and collecting various traffic variables. The information collection accuracy of a vehicle detector affects the reliability of the generated traffic information. The most universal vehicle detector is an image detector. This study installed a magnetic detector in the same position as an image detector and evaluated the accuracy of traffic volume and speed data depending on a variety of environment. Based on the evaluation, more errors occurred as the image detector was placed farther from the camera, whereas more errors were found to occur during the night rather than the day. Although rainfall did not affect the collection of traffic volume, it negatively affected speed data collection. Therefore, an analysis of the camera's view angle and its optimization depending on the camera installation position and height are required to enhance the currently operated image detector performance. It is judged that a separate performance evaluation criterion should be prepared in a bad weather environment.

• Journal of the Society of Disaster Information
• /
• v.18 no.4
• /
• pp.754-768
• /
• 2022

Purpose: The purpose of this study is to derive improvements through user satisfaction analysis for the smart traffic safety system being applied to improve traffic safety. Method: A survey-based IPA analysis was used to derive system and service improvements for groups of drivers and pedestrians. Result: As a result of the analysis, both drivers and pedestrian groups showed that Quadrant 1(Keep up the Good Work) was 'Perception of risk information', and Quadrant 3(Low Priority) was 'Reliability of warning information'. On the other hand, 'AI display suitability', which was analyzed as Quadrant 1(Keep up the Good Work) in the driver group, was found to be Quadrant 3(Low priority) in the pedestrian group. Conclusion: Satisfaction factors for smart pedestrian safety systems may vary depending on users, and it is judged that user-centered system construction and service provision are necessary.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.4
• /
• pp.86-98
• /
• 2018

Since 2015, the Korea Expressway Corporation has provided predicted travel time information, which is reproduced from DSRC systems over the extended expressway network in Korea. When it is open for public information, it helps travelers decide optimal routes while minimizing traffic congestions and travel cost. Although, sutiable evaluations to investigate the reliability of travel time forecast information have not been conducted so far. First of all, this study seeks to find out a measure of effectiveness to evaluate the reliability of travel time forecast via various literatures. Secondly, using the performance measurement, this study evaluates concurrent travel time forecast information in highway quantitatively and examines the forecast error by exploratory data analysis. It appears that most of highway lines provided reliable forecast information. However, we found significant over/under-forecast on a few links within several long lines and it turns out that such minor errors reduce overall reliability in travel time forecast of the corresponding highway lines. This study would help to build a priority for quality control of the travel time forecast information system, and highlight the importance of performing periodic and sustainable management for travel time forecast information.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.231-236
• /
• 2012

For real-time wireless sensor network applications, it is essential to provide different levels of quality of service (QoS) such as reliability, low latency, and fault-tolerant traffic control. To meet these requirements, an (m,k)-firm based real-time routing protocol has been proposed in our prior work, including a novel local transmission status indicator called local DBP (L_DBP). In this paper, a fault recovery scheme for (m,k)-firm real-time streams is proposed to improve the performance of our prior work, by contributing a delay-aware forwarding candidates selection algorithm for providing restricted redundancy of packets on multipath with bounded delay in case of transmission failure. Each node can utilize the evaluated stream DBP (G_DBP) and L_DBP values as well as the deadline information of packets to dynamically define the forwarding candidate set. Simulation results show that for real-time service, it is possible to achieve both reliability and timeliness in the fault recovery process, which consequently avoids dynamic failure and guarantees meeting the end-to-end QoS requirement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.485-492
• /
• 2010

Intelligent Transport System(ITS) has been studied in various systems, such as road environment information offering, vehicle short-range wireless/wire communication, vehicle collision preventing and pedestrian safety offering systems. Related to this, the USN technology based on the sensing accuracy for motorists and pedestrians safety, the information reliability, the maintenance and convenience for Sensor Network is highlighted. This study uses various sensors to construct USN to the road, and connect it to the developed RSU so it collects the real-time road environment information and offers it to OBU and Traffic Control Surveillance Center with Road Weather Information System. RSU collects roadside information for driver's safety and analyzes it to offer IP and beacon service according to the service priority to OBU & upper layer terminal. In the upper layer terminal it is developed the IP based Settop Box application program to offer the urban traffic information & road environment, and environment sensor error, etc. Finally, RWIS develops the real-time collection of roadside information to complement the driver's safety to the intelligent traffic system, and presents various service modes with technology convergence.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.115-121
• /
• 2002

This paper discussed to design system to overcome time, place and service limitation in the case of extracting traffic on active service in the ATM network. There are several specification in this system : for a remote control function, a real-time traffic extraction from ATM link on service without affect in-service, and an O&M(Operating and Maintenance) cost down effect. This paper include the requirement, module structure, operating characteristics and command for the developing function. This product installed at the KT's telephone office. And we have tested the stability, reliability and functionality. As the result, it was verified that this system commercially is abel to use without especial problem. Hereafter, we are improving module structure for the cost down.