• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.437-442
• /
• 2015

In a continuing screening of selected medicinal plants native to South Korea, the antioxidant and pancreatic lipase inhibitory activities of an aqueous methanolic extract from the heartwood of Aquilaria agallocha were investigated. Eighty percent of the methanolic extract of A. agallocha was further divided into $CH_2Cl_2$, EtOAc and n-BuOH in order to yield four solvent-soluble portions, namely $CH_2Cl_2$-soluble, EtOAc-soluble, n-BuOH-soluble and $H_2O$ residue. The antioxidant properties were evaluated by employing radical scavenging assays using 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) ($ABTS^+$) radicals, while the anti-obesity efficacy of A. agallocha extracts and solvent-soluble portions were tested by porcine pancreatic lipase assay. All tested samples showed dose-dependent radical scavenging and pancreatic lipase inhibitory activities. Among the tested extracts and solvent-soluble portions, the $CH_2Cl_2$-soluble portion showed much higher radical scavenging activity and pancreatic lipase inhibitory properties when compared with other solvent-soluble portions. This result suggested that there was a significant relationship between the total phenolic content and biological efficacies, and A. agallocha extract might be considered as a new potential source of natural antioxidants and as a pancreatic lipase inhibitory source. A more systematic investigation of this biomass will be performed for further investigation of activity against antioxidative and anti-obesity effects.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.458-463
• /
• 2015

Many Koreans, who are resident in Uzbekistan and Central Asia, are still avid fans of the Korean traditional soybean paste. No research study has been conducted on the Korean-Uzbekistanis soybean paste. The purpose of this study was to investigate the quality characteristics of the Korean-Uzbekistanis fermented soybean paste. Nine kinds of soybean pastes prepared by Korean-Uzbekistanis were collected, and their physiochemical properties (protease activity, amylase activity, amino type nitrogen content, reducing-sugar contents, and aerobic bacterial count) have been analyzed. The Korean-Uzbekistanis' fermented soybean paste (KU-SP) showed higher protease activity than the Korean fermented soybean paste (K-SP). The protease activities of KU-SP B, D, and H were 832, 807 and 630 unit/g, respectively, which were significantly different from others. In addition, the content of amino-type nitrogen in KU-SP B, D, and H were 777 mg%, 686 mg%, and 705 mg%, respectively. In the meanwhile, ${\alpha}$-amylase activities showed wide ranges starting from 10.82 to 47.98 unit/g. The KU-SP values, except for the KU-SP C, have shown higher activities than the K-SP. The reduced sugar content and totoal aerobic bacteria number were within the range of 0.55~3.43%/g and 7.24~8.79 log CFU/g, respectively. Finally, this research provided the basic data and information for the quality characteristics of commercial soybean paste prepared by the Korean-Uzbekistanis. These basic data can be useful for understanding the Korean food culture in Central Asia.

• Food Science and Preservation
• /
• v.19 no.5
• /
• pp.783-791
• /
• 2012

The purpose of the study was to provide baseline information that could encourage consumers and establish the direction of development for sprouts and leafy vegetables. A survey on the consumption and preference for sprouts and leafy vegetables of 823 people over 20 years of age in Seoul and Gyeonggi province was conducted. The preference for sprouts was higher in men ($3.75{\pm}0.96$) than in women ($3.64{\pm}0.84$), whereas the preference for leafy vegetables was higher in women ($4.06{\pm}0.74$) than in men ($3.88{\pm}0.90$). Based on age, the respondents in their 40s or above had high preferences for sprouts and leaf vegetables due to the importance that they accorded to health and nutrition (p<0.01). The sprouts and leafy vegetables were purchased mainly for their high nutritional value. The purchase frequency of once a month or more for leafy vegetables (82.7%) was higher than that for sprouts (57.1%). The consumers purchased sprouts and leafy vegetables mainly from a large discount store. The respondents in their 20s showed the highest percentage of purchasing from a local store whereas the older ones showed a high preference for traditional markets. The reason for the choice of the place of purchase was convenience. The freshness and price were important factors in the consumption of sprouts and leafy vegetables. In the case of leafy vegetables, the consumers preferred to buy them using the conventional weight measurement system rather than in small packages. On the other hand, mixed small packages were preferred for sprouts. The purchase frequency was correlated with the preferences, need for improvement and purchase intent for sprouts and leafy vegetables. The aspects that require improvement for producing high-quality sprouts and leafy vegetables were the nutritional and functional properties. To increase the consumption of sprouts and leafy vegetables, there is need for variations and improvement of the quality and safety of the products.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.797-803
• /
• 2016

In this study, we investigated the effect of fermentation conditions on the amylolytic and proteolytic activities of Aspergillus luchuensis strain 74-5 and Aspergillus oryzae strain 75-2, which are used in the preparation of the starter culture, for Takju (Korean traditional rice wine). The starter culture was optimized using different conditions, such as inoculum size, inoculation temperature, and incubation time. The enzyme activities under each condition were measured. In the A. luchuensis strain 74-5 starter culture, the ${\alpha}-amylase$ and glucoamylase activities increased, however the activity of acidic protease decreased as the diluent to starter culture ratio increased. In the A. oryzae 75-2 starter culture, all enzyme activities were maintained at a higher level even at 5% inoculation ratio. Higher enzyme activities were observed in the middle range of inoculation temperature (35, $40^{\circ}C$), than in the lower range (20, $30^{\circ}C$). Enzyme activity in the starter culture varied with incubation time, however it was the highest at 144 and 120 hr, respectively, for A. luchuensis strain 74-5 and A. oryzae strain 75-2. The spore count of the starter culture was approximately $2{\times}10^7$ during fermentation, out of which contamination by aerobic bacteria was about $3{\times}10^3$. The results suggested that the starter culture of each strain could be used as an inoculum for fermentation. However, we needs to conduct further research for the selection of suitable diluting agents as well as drying methods to reduce the contamination by aerobic bacteria, while retaining the enzyme activity.

• Food Science and Preservation
• /
• v.24 no.2
• /
• pp.187-195
• /
• 2017

This study evaluated quality characteristics of soybean fermented by selected lactic acid bacteria, which were the enzyme strains with high antimicrobial activities isolated from traditionally prepared soybean paste. We determined total aerobic and lactic acid bacteria counts, protease and amylase activities, reducing sugar and amino-type nitrogen contents, and the amounts of amino acids, organic acids, and aroma-compounds. The total aerobic bacteria counts in soybean fermented with strain I13 ($7.75{\times}10^9CFU/mL$) were the highest among all the strains analyzed. Lactic acid bacteria numbers were $2.85{\times}10^9$ to $4.35{\times}10^9CFU/mL$ in soybean fermented with isolates. Amylase and protease activities of the JSB22 sample were the highest among all sample. Reducing sugar and amino-type nitrogen contents of soybean fermented with JSB22 (1.23%, 94.52 mg%) were highest. Total amino acid content of the samples was 15.88-17.62%, and glutamic acid, aspartic acid, leucine, lysine, and arginine were the major amino acids. Lactic acid (0.82-3.65 g/100 g), oxalic acid (22.74-63.57 mg/100 g), and fumaric acid (2.88-6.33 mg/100 g) were predominant organic acids. A total of 39 volatile aroma-compounds were identified, including 2 esters, 5 ketones, 7 alcohols, 14 hydrocarbons, 2 heterocyclic compounds, 4 acids, and 5 miscellaneous compounds. These results represent useful information for the development of a starter (single or complex) and will be used for production of functional fermented soybean foods.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.1
• /
• pp.52-61
• /
• 2009

In this study, we evaluated the effects of sesame powder on the fermentation of Baechukimchi, by assessing sensory, physicochemical, and microbiological properties during up to 25 days of fermentation. The Baechukimchi, with various levels [0, 1, 2, 3, 4%(w/w)] of sesame powder, was fermented at $10^{\circ}C$. The product containing the control and 1% sesame powder evidenced the highest scores for appearance and smell. Taste and texture were highest in the 1% and 2% sesame powder, and the overall acceptability was highest in the 2% sesame powder sample. During fermentation, titratable acidity increased while pH gradually decreased. pH was higher in the sample with sesame powder than in the control, and the titratable acidity increased with increasing sesame powder content on day O. Reducing sugar increased sharply during fermentation, and then gradually decreased. In particular, the 2% sesame powder sample maintained the highest content. Total vitamin C was slightly increased at initial fermentation and then steadily decreased. The total polyphenol content and antioxidant effect of the experimental groups with added sesame powder were higher than those of the controls. Additionally, the time required to achieve maximum levels of lactic acid bacteria, as determined by log numbers of cells and total viable cells, were more delayed in the experimental groups with added sesame powder than in the controls. Our results indicated that the Baechukimchi with $1{\sim}2%$ added sesame powder was acceptable.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.1
• /
• pp.25-31
• /
• 2009

In the present study, three types of teriyaki sauce were prepared using chicken bone and eel bone, which are commonly used as the primary ingredient of teriyaki sauce, as well as codfish bone, which has various functions. The and analyzed their quality characteristics of the different types of teriyaki sauce were then compared through physiochemical and sensory evaluation. The results of this study were as follows. The water content was lowest and the ash content was highest in teriyaki sauce that was prepared using chicken bone as the primary ingredient. In addition, the Ca, K, Mg, Na and P content were highest in the teriyaki sauce that was prepared using chicken bone as the primary ingredient. The total free amino acid content was highest in teriyaki sauce prepared using chicken bone, followed by sauces prepared using codfish bone and eel bone. The levels of free amino acids evaluated in this study occurred in the following order for all teriyaki sauces: glutamic acid > aspartic acid > leucine. When the sensory evaluation was conducted, teriyaki sauce prepared using chicken bone as the main ingredient was found to be best, followed by sauce prepared using codfish bone in terms of palatability and viscosity among descriptive scales, and smell and general preference among hedonic scales. The results of this study suggest that teriyaki sauce could be produced using codfish bone instead of chicken bone, which would enable production of a high value-added product through the use of a common byproduct. This would result in the efficient use of unused resources, prevention of environmental pollution and supply of an inexpensive that could be widely used in the food processing and food service industries.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.101-118
• /
• 2008

This paper reviews the present situation of Triticale cultivation and examines the potentiality of contribution to livestock as well as poultry sector in Bangladesh Agriculture. Triticale is a human-made cross between rye and durum wheat that has the ability to produce quality green fodder, and then re-grow after first and second cutting to produce grain. In Bangladesh, it is a non-traditional cereal that grows well during the cool and dry Rabi season (November-March) when fodder and feed scarcity is a major limiting factor for ruminant livestock. In Bangladesh Triticale was started to grow in the late Ninety's. The scientists of Bangladesh Agricultural Research Institute (BARI) were first introduced triticale in Bangladesh. Still now the situation of Triticale is grown as fooder and feed in Bangladesh within the scientists under trial. High quality grass fodder was obtained by cutting green triticale plants twice, at 35 and 50 days after seeding, while later the ratooning tillers produced grain to a yield of 1.1-2.4 t/ha of grain for poultry feed or human food. Triticale straw was twice as nutritious as rice or wheat straw and its grain contained more protein than other cereals. Researchers and farmers have also successfully made triticale hay and silage from a mixture of triticale green cuttings, rice straw and molasses. A feeding trial at Bangladesh Livestock Research Institute(BLRI), Savar station showed a large(46%) increase in cow live weight gain and a 36% increase in milk yield (but no change in milk quality or dry matter intake) in cows fed triticale silage compared with those fed rice straw over a period of nine weeks. In another feeding trial, it was found that triticale grain was a good replacement for wheat in the feed blend for chickens in Bangladesh. So it will be a good chance to alive our livestock as well as poultry sector if triticale enters to our existing cropping system as fodder cum grain. The challenge in Bangladesh is to identify fodder technologies that match existing small-scale farmer cropping patterns without needing major inputs or increasing risks. Preliminary field experiments revealed that triticale is a crop with good potential to produce quality fodder and grain for small scale farmers in Bangladesh.

• The Journal of Society for e-Business Studies
• /
• v.21 no.3
• /
• pp.51-78
• /
• 2016

Online-to-offline (O2O) commerce is the new trend that merges online commerce with traditional industries in various fields. The primary purpose of this paper is to find out which factors influence customers' intention to switch from call-based driver-for-hire services to O2O app-based services. This study used variables and factors based on Theory of Switching Intention, and Extended Unified Theory of Acceptance and Use of Technology in order to design research questions. We surveyed 500 users of call-based driver-for-hire services. According to the result of this study, dissatisfaction with the current call-based driver-for-hire services is estimated to be a significant factor that strengthens customers' intention to switch from the call-based driver-for-hire services to the app-based services. Loyalty to the previous call-based driver-for-hire services was not seen as a crucial motivator that causes customers to switch to the new O2O driver service. Switching cost also did not play a key role in explaining the relationship between dissatisfaction with the current call-based service and the intention to use the new app-based service. Performance expectancy, easiness in use, the level of user's knowledge or available assistance in relation to the use of app-based services, and expectancy for reasonable price was found to have meaningful impacts on customers' intention to switch from the call-based driver-for-hire services to the app-based services. Age, gender and user experience on the new service were found incapable of moderating the relationship between aforementioned factors which influence customers' choice of the app-based driver-for-hire service, and customers' intent to switch to the app-based service.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.