• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.502-508
• /
• 2012

Heliostat, as a concentrator to reflect the incident solar energy to the receiver, is the most important system in the tower-type solar thermal power plant since it determines the efficiency and ultimately the overall performance of solar thermal power plant. Thus, a good sun tracking ability as well as a good optical property of it are required. Heliostat sun tracking system uses usually an open loop control system. Thus the sun tracking error caused by heliostat's geometrical error, optical error and computational error cannot be compensated. Recently use of sun tracking error model to compensate the sun tracking error has been proposed, where the error model is obtained from the measured ones. This work is a development of heliostat sun tracking error measurement and compensation method using BCS (Beam Characterization System). We first developed an image processing system to measure the sun tracking error optically. Then the measured error is modeled in linear polynomial form and neural network form trained by the extended Kalman filter respectively. Finally error models are used to compensate the sun tracking error. We also developed the necessary image processing algorithms so that the heliostat optical properties such as maximum heat flux intensity, heat flux distribution and total reflected heat energy could be analyzed. Experimentally obtained data shows that the heliostat sun tracking accuracy could be dramatically improved using either linear polynomial type error model or neural network type error model. Neural network type error model is somewhat better in improving the sun tracking performance. Nevertheless, since the difference between two error models in compensation of sun tracking error is small, a linear error model is preferred in actual implementation due to its simplicity.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.207-214
• /
• 2020

In this paper, we implement linear-quadratic-Gaussian based vector tracking loop (LQG-VTL) instead of conventional extended Kalman filter based vector tracking loop (EKF-VTL). The LQG-VTL can improve the performance compared to the EKF-VTL by generating optimal control input at a specific performance index. Performance analysis is conducted through two factors, frequency thermal noise and frequency dynamic stress error, which determine total frequency tracking error. We derive the thermal noise and the dynamic stress error formula in the LQG-VTL. From frequency tracking error analysis, we can determine control gain matrix in the LQG controller and show that the frequency tracking error of the LQG-VTL is lower than that of the EKF-VTL in all C/N0 ranges. The simulation results show that the LQG-VTL improves performance by 30% in Doppler tracking, so the LQG-VTL can extend pre-integration time longer and track weaker signals than the EKF-VTL. Therefore, the LQG-VTL algorithm is more robust than the EKF-VTL in weak signal environments.

• 한국태양에너지학회 논문집
• /
• 제29권3호
• /
• pp.1-11
• /
• 2009

Heliostat sun tracking accuracy could be the most important requirement in solar thermal power plant, since it determines the overall efficiency of power plant. This study presents the effect of geometrical errors on the heliostat sun tracking performance. The geometrical errors considered here are the mirror canting error, encoder reference error, heliostat position error. pivot offset and tilt error, gear backlash and mass unbalanced effect error. We first investigate the effect of each individual geometrical error on the sun tracking accuracy. Then, the sun tracking error caused by the combination of individual geometrical error is computed and analyzed. The results obtained using the solar ray tracing technique shows that the sun tracking error due to the geometrical error is varying almost randomly. It also shows that the mirror canting error is the most significant error source, while the encoder reference error and gear backlash are second and the third dominant source of errors.

• 아태비즈니스연구
• /
• 제13권4호
• /
• pp.163-175
• /
• 2022

Purpose - This study introduces a methodology for finding the optimal tracking error of active stock funds. Tracking error is commonly used in risk budgeting techniques as a concept of cost for alpha creation. Design/methodology/approach - This study uses a post-optimal smart beta portfolio that maximizes alpha under the given tracking error constraint. Findings - As a result of the analysis, the smart beta strategy that maximized alpha under the constraint of 0.15% daily tracking error shows the highest IR. This means the maximum theoretically achievable efficiency. In this regard, a fixed-effect panel regression analysis is conducted to evaluate the active efficiency of domestic stock funds. In addition to control variables based on previous studies, the effect of tracking error on alpha is analyzed. The alpha used in this model is calculated using the smart beta portfolio according to the size of the constraint of the tracking error as a benchmark. Contrary to theoretical estimates, in Korea, the alpha performance is maximized under a daily tracking error of 0.1%. This indicates that the active efficiency of domestic equity funds is lower than the theoretical maximum. Research implications or Originality - Based on this study, it is expected that it can be used for active risk management of pension funds and performance evaluation of active strategies.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.39-46
• /
• 2009

Heliostat, as a mirror system tracking the sun's movement, is the most important subsystem determining the efficiency of solar thermal power plant. Thus the accurate sun tracking performance under the various hazardous operating condition, is required. This study presents a methodology of development of the solar ray tracing technique and the application of it in the analysis of sun tracking error due to the heliostat geometrical errors. The geometrical errors considered here are the azimuth axis tilting error and the elevation axis tilting error. We first analyze the geometry of solar ray reflected from the heliostat. Then the point on the receiver, where the solar ray reflected from the heliostat is landed, is computed and compared with the original intended point, which represents the sun tracking error. The result obtained shows that the effect of geometrical error on the sun tracking performance is varying with time(season) and the heliostat location. It also shows that the heliostat located near the solar tower has larger sun tracking error than that of the heliostat located farther.

• 한국태양에너지학회 논문집
• /
• 제29권6호
• /
• pp.22-31
• /
• 2009

Canting is the optical alignment of mirror facets of heliostat such that the heliostat could focus the energy as a unit concentrator. Canting could improve the optical performance of heliostat and thus improves the efficiency of heliostat and ultimately improves the efficiency of the solar thermal power plant. This study discusses the effect of mirror canting, especially off-axis canting, used to compensate the sun tracking error caused by the heliostat geometrical errors. We first show that the canting could compensate the sun tracking error caused by the heliostat geometrical errors. Then we show that the proper canting time could exist, depending on the heliostat location. Finally we show how much the sun tracking performance could be improved by canting, by providing RMS sun tracking error. The limitation and caution of using canting to improve the sun tracking performance are also discussed.

• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.59-67
• /
• 2003

Multipath is an inevitable error source in radio navigation system such as GPS, it causes signal tracking errors such as carrier tracking errors, code tracking errors. Since code tracking error is a dominant error in absolute positioning, this paper focuses on the improvement of code tracking performance. This paper proposes a method that detects the change of autocorrelation function's slope and mitigates the multipath error. Also, this paper shows the performance evaluation results by post-processing the digitized RF samples.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권3호
• /
• pp.143-148
• /
• 2001

A lot of robot trajectory tracking methods are proposed to enhance the tracking error, but irregular tracking errors are always accompanied and very hard to reduce it. Up to now, these irregular tracking errors are reduced by introducing more complicated control algorithms. But, it is intuitively obvious to reduce only the big errors selectively in the irregular ones for the better performance instead of using more complicated control algorithms. By the characteristics of the robot, big tracking errors of the end-effector are generated mostly due to the fast moving of joint. So, in this paper, we introduce a new method which reduce the big tracking errors by clippings the joint velocity with the constraint of given path. Using this method, desired trajectory tracking is obtained within the far reduced error bound. Also, this method is successfully applied to generate the path-constrained error reducing trajectories for 2-axis SCARA type robot.

• 제어로봇시스템학회논문지
• /
• 제12권8호
• /
• pp.739-745
• /
• 2006

This paper presents performance improvement of the INS velocity-adided GPS carier tracking loop. To this end, INS velocity-aided GPS carrier tracking loop was modeled as a feedfoward and a feedback loop system. In the phase tracking loop, it was shown that the tracking error caused by the dynamic motion of the vehicle can be compensated with the aiding of the INS information irrespective of the loop order and bandwidth. However, the signal trcking error increases as the INS error increases. It was also shown that in order to remove the tracking error caused by INS bias error, more than or equal to 2nd order PLL should be used. Experiments were carried out and the experimental results were compared with the analysis results.

• 한국산업정보학회논문지
• /
• 제18권1호
• /
• pp.81-89
• /
• 2013

본 연구는 대표지수 ETF와 섹터 ETF시장에 대해 ETF 가격과 표적지수, 그리고 ETF 가격과 표적지수 가격간의 차이인 총추적효과를 이용하여 가격에 대한 정보효과를 확인하고자 한다. 나아가 총추적효과를 구체적으로 ETF 가격과 순자산가치 NAV의 차이인 시장추적오차와 NAV와 표적지수와의 차이인 NAV 추적오차로 구분한다. 분석결과를 살펴보면 첫째. 시장 대표지수인 KODEX200의 경우 가격에 영향을 미치는 의미 있는 변수를 확인할 수 없었던 반면 대부분의 섹터 ETF의 경우 하루 전의 총추적오차나 시장추적오차가 가격결정에 의미 있는 영향을 미치는 요인으로 나타났다. 둘째, 대부분의 산업별 ETF의 가격에 대해 하루 전의 시장추적오차는 음(-)의 영향을 미치는 것으로 나타나 가격발견기능을 하고 있음을 확인 할 수 있었지만, NAV 추적오차에는 그러한 기능을 찾을 수 없었다. 마지막으로 섹터 ETF 중 에너지화학, 건설, 정보통신, 그리고 반도체 산업의 경우 하루 전의 표적지수에 의해 양(+)의 영향을 받는 것을 보여준다.