• Journal of the Korean Institute of Navigation
• /
• v.18 no.3
• /
• pp.19-30
• /
• 1994

By use of the recent tropical cyclones' data in the Northwest Pacific Ocean, the occurrence frequency and region of typhoon as well as the features of the monthly mean track were analyzed. As the result of this study, (1) mean occurrence frequency of typhoon per year is 27.5, and 68% of total typhoons were formed in July to October and shown the highest frequency in August. (2) The ave-rage duration of typhoons is 8.5 days, and super typhoon which maximum sustained surface wind speeds is more than 130 knots occurs most frequently in October and November. (3) The highest frequency ap-pears around the Caroline, Mariana and Marshall Islands, and in wintertime, typhoon occurs in lower lati-tude comparing with those in summertime. (4) The typhoon track depends upon the distribution of pres-sure system and steering current in neighbouring areas. The mean track of typhoon can be classified into three types such as westward-moving type, northward-moving type and abnormally moving type. The west-ward-moving typhoons make landfall on the southern China by way of the South China Sea in June and July, on mid-part of China in August and September, and on Indo-china Peninsula in October and Novem-ber. The northward-moving typhoons approximately move on north~northwestward track to $20~30^{\circ}N$ from the occurrence region, then recurve to the East Sea through Korean Peninsula and Kyushu Island in June and July, to the Noth Pacific Ocean along the Japanese Islands in August and September and to the North Pacific Ocean through the seas far south off the Japan in October and November.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.836-841
• /
• 2004

Recently, the development of the paved track is required as a Low-maintenance of conventional line. The main reason is that the line capacity and bearing of track are increased progressively. The most important factor of paved track is stability and applicability. To be based on this subject, Cement Mortar Pouring(CMP) paved track is developed. CMP paved track is a kind of ballast reinforced track using the pre packed concrete technique. The most important to design is characteristics of the structure. CMP slab's thickness is less than the conventional slab track and pouring layer is attached tie and roadbed directly. On this paper, to verify the basic structure of the CMP track, characteristics of the structure is investigated pouring layer, tie and interaction of the each layer using the 3D finite elment analysis.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.836-841
• /
• 2005

As gravel roadbed is gradually turn down by repetitive loading of train, lasting work for maintenance and management of track is necessary to reduce the settlement of roadbed and the deterioration of track. Despite of above weak point, gravel roadbed has become a basic structure of roadbed at the present time. But request for new structure of roadbed is recently presented to settle an increased transportation capacity of track, and to solve a shortage of the labor to handle maintenance work of track. Therefore, we begin to research about maintenance-free roadbed like paved track from two years ago. In this study, a series of tests were performed to clarify the characteristics of strength and permeability of concrete specimen, which is the upper part of paved track injected by cement mortar, by type of geotextile and finally to give a basic data for application of geotextile to the lower part of paved track.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1056-1064
• /
• 2008

It is estimated that the running of locally-developed next generation High Speed Trains with maximum speed of 400km/h will help to deteriorate track components. It was presented rail defect coding system in UIC 712R includes the definitions of damage types of rail, maintenance procedures, and etc to detect and maintain. It is necessary to make a track maintenance manual determining track maintenance periods using the standardization of damage types of track components such as: sleeper, fastener, elastic pad. In this paper, the damage types of high speed track components are investigated by referring domestic and foreign literatures. And then the damage types of rail given in UIC 712R is reclassified more particularly and classified damage types of track components using internal high speed railway. In conclusion, this paper suggests standardization for damage types of track components on internal high speed railway.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.73-79
• /
• 1998

For the design and development of the wheel type excavator, the dynamic effects of travelling on the performance of the equipment should be first analyzed and conside- red in the initial design stage. In order to test the durability of the equipment in a short period, th travelling test should be performed over accelerated durability test tracks. which is more severe than general field roads such as city road, paved road, unpaved road and rough road. In this paper, a parametric study is performed in order to determine important design parameters of durability test track of a wheel type excavator. A rigid body model is developed using DADS and dynamic analysis is performed for the equipment travelling over several test roads with different severity. A comparison of test and analysis results is also presented.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.800-805
• /
• 2009

This paper proposes the track system with twin block sleeper for a LIM type maglev railroad. Because a LIM type maglev railroad is expected to be constructed in inner city, social costs can be required under construction. Accordingly, superstructure using precast plate was adopted and twin block sleeper which can be constructed together with precast plate was developed to reduce the construction period. To examine the structural safety of the proposed track system with twin block sleeper, the finite element analyses and the laboratory experiments were performed. Also, the workability of the proposed track system was investigated through the construction simulation test and construction experience in test bed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4185-4191
• /
• 2015

The demand for improved rail transportation safety is growing due to the increased speeds of current railways. In addition, freight trains with heavier axle loads are required to run on conventional railways. In order to meet these requirements, increased rail weights and the application of a CWR system have been introduced on conventional railways. The H type sleeper, which has higher lateral resistance than the existing mono sleepers, has been recently developed to increase track stiffness and reduce track irregularities. In this paper, the effects of a H-type sleeper on track behavior were investigated by 3-Dimensional F.E. analysis.

• Atmosphere
• /
• v.24 no.4
• /
• pp.503-514
• /
• 2014

Evaluation of predictability of numerical models for tropical cyclone track was performed using along-and cross-track component. The along-and cross-track bias were useful indicators that show the numerical models predictability associated with cause of errors. Since forecast errors, standard deviation and consistency index of along-track component were greater than those of cross-track component, there was some rooms for improvement in alongtrack component. There was an overall slow bias. The most accurate model was JGSM for 24-hour forecast and ECMWF for 48~96-hour forecast in direct position error, along-track error and cross-track error. ECMWF and GFS had a high variability for 24-hour forecast. The results of predictability by track type showed that most significant errors of tropical cyclone track forecast were caused by the failure to estimate the recurvature phenomenon.

• Structural Engineering and Mechanics
• /
• v.61 no.6
• /
• pp.775-784
• /
• 2017

This study is devoted to developing many new substructure models for ballasted railway track by using the pyramid model philosophy. As the effect of railway embankment has been less considered in the previous studies in the field of vehicle/track interaction, so the present study develops the pyramid models in the presence of railway embankment and implements them in vehicle/track interaction dynamic analyses. Considering a moving car body as multi bodies with 10 degrees of freedom and the ballasted track including rail, sleeper, ballast, subgrade and embankment, two categories of numerical analyses are performed by considering the new substructure systems including type A (initiation of stress overlap areas in adjacent sleepers from the ballast layer) or type B (initiation of stress overlap areas in adjacent sleepers from the subgrade layer). A comprehensive sensitivity analyses are performed on effective parameters such as ballast height, sleepers spacing and sleeper width. The results indicate that the stiffness of subgrade, embankment and foundation increased by increasing the ballast height. Also, by increasing the ballast height, rail and ballast vertical displacement decreased.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1359-1370
• /
• 2008

In the track geometry such as rails, sleepers, ballasts and fastener, track deterioration occurs by repetitive train weight and the high-speed railway takes a trend faster than normal. Track deterioration of over threshold value harms ride comfort and furthermore affect in trains safety seriously. An organic and systematic track maintenance system is very important because a trend of the track deterioration effects on track life-cycle and running safety. Also costs of the railway track permanent way and its maintenance are extremely large, forming a significant part of the total infrastructure expenditure. Therefor reasonable and efficient track maintenance has to be planed on a budget. It is required to carry out not only corrective maintenance but preventive maintenance for the track maintenance. In order to perform maintenance jobs in the boundary of the machines and resources given regarding the type and amount jobs, it is necessary to determine feasible or optimal scheduling considering the priority. In this study, the system organization and required functions for the development of track maintenance system supported track deterioration prediction and optimal scheduling are proposed.