• Journal of the Geological Society of Korea
• /
• v.54 no.5
• /
• pp.579-584
• /
• 2018

It is crucial to determine a mixing ratio using an end-member mixing analysis when there is seawater intrusion. In this study, an error from the calculation of the mixing ratio between seawater and freshwater based on the principles of uncertainty was determined. I present the errors in the calculated mixing ratios as a function of the chemical difference between the mean seawater concentrations and standard deviations. The error is caused by: (1) the mixing ratio between seawater and freshwater; (2) the difference between the mean concentration and the standard deviation; and (3) the difference of the tracer concentration between freshwater and seawater (inversely). In particular, the error may determine hydrogeochemical process (either precipitation or dissolution) when a value of ionic delta (difference between measured and theoretical concentration) is close to zero during cation exchange by seawater intrusion.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.104-109
• /
• 2010

Purpose: $[^{18}F]$Fallypride plays an effective radiotracer for the study of dopamine $D_2/D_3$ receptor occupancy, neuropsychiatric disorders and aging in humans. This tracer has the potential for clinical use, but automated labeling efficiency showed low radiochemical yields about 5~20% with relatively long labelling time of fluorine-18. In present study, we describe an improved automatic synthesis of [$^{18}F$]Fallypride using different base concentration for routine clinical use. Materials and Methods: Fully automated synthetic process of [$^{18}F$]Fallypride was perform using the TracerLab $FX_{FN}$ synthesizer under various labeling conditions and tosyl-fallypride was used as a precursor. [$^{18}F$]Fluoride was extracted with various concentration of $K_{2.2.2.}/K_2CO_3$ from $^{18}O$-enriched water trapped on the ion exchange cartridge. After azeotropic drying, the labeling reaction proceeded in $CH_3CN$ at $100^{\circ}C$ for 10 or 30 min. The reaction mixture was purified by reverse phase HPLC and collected organic solution was exchanged by tc-18 Sep-Pak for the clinically available solution. Results: The optimal labeling condition of [$^{18}F$]Fallypride in the automatic production was that 2 mg of tosyl-fallypride in acetonitrile (1 mL) was incubated at $100^{\circ}C$ for 10 min with $K_{2.2.2.}/K_2CO_3$ (11/0.8 mg). [$^{18}F$]Fallypride was obtained with high radiochemical yield about $66{\pm}1.4%$ (decay-corrected, n=28) within $51{\pm}1.2$ min including HPLC purification and solid-phase purification for the final formulation. Conclusion: [$^{18}F$]Fallypride was prepared with a significantly improved radiochemical yield with high specific activity and shorten synthetic time. In addition, this automated procedure provides the high reproducibility with no synthesis failures (n=28).

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E2
• /
• pp.57-68
• /
• 2006

Four intensive seasonal sampling campaigns between October 1998 and October 1999 were undertaken at an urban site of Chongju, in which polyurethane foam (PUF) sampler was used to collect particulate- and vapor-phase polycyclic aromatic hydrocarbons (PAHs). The contribution to total (particulate+vapor) PAH concentration by the vapor phase component exceeded the particulate phase contribution by factor of ${\sim}2.6$. Summed concentrations of phenanthrene (30.9%), pyrene (16.6%), naphthalene (11.3%) and fluoranthene (11.0%) account for significant amounts of the vapor-phase, while chrysene (12.5%), benzo[b]fluoranthene (11.6%), indeno[123-cd]pyrene (9.9%), benzo[ghi]perylene (9.5%), benzo[k]fluoranthene (9.4%), pyrene (8.9%), and benzo[a]pyrene (8.3%) are found to be the most common PAH compounds in the particulate phase. The results from application of principal component analysis to particulate-phase PAH data demonstrate that a combination of PAH and $PM_{2.5}$ inorganic data is a more powerful tracer of emission sources than PAH species data alone. Particulate-phase PAH species were found to be associated predominantly with emissions from diesel engine vehicles and incineration.

• Journal of radiological science and technology
• /
• v.11 no.1
• /
• pp.25-31
• /
• 1988

Studies on the clinical significance with Amerlex $FT_{4}$ RIA kit observing the determination of $FT_{4}$ were investigated using a tracer as $^{125}I-T_{4}$ derivative which is not almostly bound to thyroxine binding globulin, etc. The results are followed; 1. $FT_{4}$ value($1,55{\pm}0.38ng/100ml$) of normal group was not accorded that of hyperthyroidism with Amerlex $FT_{4}$ RIA kit, and was higher than that of hypothyroidism. 2. $FT_{4}$ value was lower level in chronic-kidney disfunction syndrome whereas, it was normal in a cancer patient, a woman in pregnancy and a patient in TBG disfunction. 3. The value of this method is a good corelationship at that of equilibrium dialysis method. (r=0.931) 4. $FT_{4}$ value by this kit was linear relationship to those of the other kit (Gamma Coat and Liquisol), and the normal value of each methods was also similar. As mentioned above, this method is more simple and rapid, compared to the other method. Therefore, it was thought that this method is a very useful clinically.

• Korean Journal of Veterinary Research
• /
• v.33 no.1
• /
• pp.131-135
• /
• 1993

Enzyme-linked Immuno sorbent Assay (ELISA) for the serological diagnosis of Brucella abortus was developed and compared with plate agglutination test. Cell wall antigen was extracted from Brucella abortus 1119-3 by sonication and with a sodium deoxychlate solution. Optimum protein concentration of coating antigen were $0.4{\mu}g/100{\mu}{\ell}$ protein on each microtiter plate well. Horse radish peroxidase (HRP) labeled protein-G was used as a tracer of reacted antibodies. ELISA confirmed the agreeable results of 40 cases out of 43 cases by plate aggulutination test. ELISA diagnosed positive cases(10 out of 12) and negative cases (1 out of 12) with dubious sera by plate agglutination test. From this results ELISA could be used for the early diagnostic tools of Brucellosis in cattle.

• Biomolecules & Therapeutics
• /
• v.22 no.2
• /
• pp.161-165
• /
• 2014

The main purpose of this study was to develop a novel, in situ gel system for sustained delivery of ranitidine hydrochloride. Ranitidine in situ gels at 0.2%, 0.5%, and 1.0% gellan gum concentration (w/v) were prepared, respectively, and characterized in terms of preparation, viscosity and in vitro release. The viscosity of the gellan gum formulations in solution increased with increasing concentrations of gellan gum. In vitro study showed that the release of ranitidine from these gels was characterized by an initial phase of high release (burst effect) and translated to the second phase of moderate release. Single photon emission computing tomography technique was used to evaluate the stomach residence time of gel containing $^{99m}Tc$ tracer. The animal experiment suggested in situ gel had feasibility of forming gels in stomach and sustained the ranitidine release from the gels over the period of at least 8 h. In conclusion, the in situ gel system is a promising approach for the oral delivery of ranitidine for the therapeutic effects improvement.

• Journal of the Korean Society of Visualization
• /
• v.4 no.2
• /
• pp.69-75
• /
• 2006

The microbubbles were used in various fields, such as turbulent control, drag reduction, material science and life science. The X-ray PTV using X-ray micro-imaging technique was employed to mea-sure the size and velocity of micro-bubbles moving in an opaque tube simultaneously. Micro-bubbles of $10{\sim}60{\mu}m$ diameter moving upward in an opaque tube (${\phi}$=2.7mm) were tested. Due to the different refractive indices of water and air, phase contrast X-ray images clearly show the exact size and shape of over-lapped microbubbles. In all of the working fluids tested (deionized water, tap water, 0.01 and 0.10M NaCl solutions), the measured terminal velocity of the microbubbles rising through the solution was proportional to the square of the bubble diameter. The rising velocity was increased with increasing mole concentration. The microbubble can be useful as contrast agent or tracer in life science and biology. The X-ray PTV technique should be able to extract useful information on the behavior of various bio/microscale fluid flows that are not amenable to analysis using conventional methods.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.731-738
• /
• 1995

Toxic air pollutants are investigated in a petrochemical industrial park in Taiwan by using a movable open path FTIR. The results show the qualitative and quantitative analysis of emission gases from plants, and also provide the emission rate of different compounds. More than twenty compounds under usual operation are found from this industrial park. The concentration variation with time can be correlated exactly with wind direction. It means that by changing the measuring points, the source of emission can be unambiguously identified. An EPA proved PAL model is applied to estimate the emission rate of either a point or an area source. Local atmospheric stability is determined by releasing the $SF_6$ tracer. The origins of errors come mainly from the uncertainty of source's configuration and the variation of meteorological condition. Through the continuous measurement (half an hour base in this study) of OP-FTIR sensor, the maximum value of emission rate and the annual amount of emission can be derived. The emission rate of the measured toxic gases are derived by the model technique and the results show that the emission amount are in the order of ten to hundred tons per year.

• Journal of Ginseng Research
• /
• v.15 no.2
• /
• pp.112-116
• /
• 1991

The metabolic fate of ginsenosides including gastrointestinat absorption, organ distribution, excretion and metabolism in liver was investigated by tracer studies using the radio-labeled ginsenosides. 3H-ginsenosides were shown to be absorbed from the mouse digestive tract and then to be excreted rapidly into urine and/or bile. Bile juice was concluded to play a significant role in absorption of ginsenosides. The total concentration of radioactivity persisted in tissues 24 hrs after oral administration was less than 1.3% of the administered dose and Rbl showed the highest value. The concentrations of radioactivity were relatively high in the liver and kidney. After administration of Rbl radioactivity was detected in the brain. After oral administration of 8H-ginsenosides, major component excreted into urine was found to be the intact ginsenosides and decomposed and/or metabolized products were found in GIT in the case of Rbl. 3H-ginsenoside Rbl was shown to be metabolized in the liver and the metabolite was suggested to be an acylated compound of Rbl by a certain organic acid.

• Journal of the Korean housing association
• /
• v.12 no.3
• /
• pp.141-148
• /
• 2001

To design mechanical ventilation for bathroom of apartment houses where air supply and exhaust are taken into consideration, mock-ups of ventilation systems, widely used in bathroom of apartment houses with an area of 100$\textrm{m}^2$, were made and installed in a laboratory. These ventilation mock-ups were available for control of air supply and exhaust, and the sizes of supply openings were 40cm${\times}$1cm, 40cm${\times}$3cm, and 40cm${\times}$5cm. They were installed at five positions, spaced 45cm at a height of 5cm from the floor. The exhaust fan was designed for its operating voltage to be set to five steps(100V, 130V, 150V, 180V and 220V) in order to control its air flow rates. When the size and position of each supply opening were changed with the wind velocity of the exhaust fan set to the step 5, the ventilation rates were measured and analyzed by the concentration decay method of tracer gas method, in order to present an efficient mechanical ventilation system. The results of the study revealed that the ventilations rates would increase in the presence of supply openings, compared to the absence of supply openings, and that the larger the size of the supply opening, the more the ventilation rates. Therefore, it was found necessary to take air supply into consideration.