• Proceedings of the Korean Society of Veterinary Pathology Conference
• /
• 2003.10a
• /
• pp.46-46
• /
• 2003

Polychlorinated dibenzo-p-dioxins (PCDDs) are widespread, persistant, and highly toxic environmental pollutants. TCDD is the most potent congener among PCDDs and the most thoroughly investigated model compound of this class of chemicals. These compounds elicit a variety of common biochemical and toxic response, including specific binding to the cytosolic AHR [1] and induces a variety of biological response ranging from induction of cytochrome P-450 1A (CYP1A) to liver damage and cancer [2]. This study was carried out to investigate the protective effects of YCY, extract of a cricket, Gryllus bimaculatus, on hepatotoxicity in 6-week-old SD rat exposured to TCDD (omitted)

• Archives of Pharmacal Research
• /
• v.3 no.1
• /
• pp.1-6
• /
• 1980

As part of our endeavor to increase the productivity of steroid by enzymatic transformation of corticosteroids, attempts have been made to increase the solubility of steroids by using some organic solvents. When the solubility of steroids is the rate limiting factor in the steroid transformation, it was found that the use of solvents significantly improved the yield. Hydrocorisone as a substrate and 3-ketosteroid .DELTA.$^{1}$ dehydrogense as an immobilized whole cell enzyme were employed as the model system for this study. It was found that the yield of product, prodnisolone, goes through a maximum with an increase in the solvent concentration. At a high solvent concentration, the solvent showed a toxic effect and it causes a decrease in the product yield by the second order inhibition mechanism. Among the solvents evaluated, methanol and ethanol were found to be the best. These alcohols are not only good solvents but also showed minimal toxic effect. Based on the experimental results, it was concluded that the productivity of steroid can be increased by usign well selcted solvents systems for the enzymatic transformation of steroids.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.63-70
• /
• 2005

It has been used so many kinds of architectural materials and interior products in current building construction, and use of composite architectural materials is increasing with the development of chemical technology. As the green architecture has become the center of public interest, much effort is conducted in advanced countries on the LCA point of view, such as restriction of architectural materials that emitting pollution substances, developing of Non-Toxic architectural materials, and recycling of used materials, etc. with the cooperation of related organizations, material manufacture companies, and construction companies. Because the kinds of materials to be used in building constructions are so various, there might be some possibility of personal and subjective choice at the time of materials selection resulting the missing the requirements of building components and the choice of harmful materials to human. One way to resolve the material problem is to present the green architectural materials which coincide with the quality performance at service and not harmful to man and nature. At this point of view, this study aims to develop the material classification model by investigating the major labelling system about green architectural materials in both domestic and abroad and to implement an efficient material selection system by making a powerful database of environmental standard and quality basis of building requirements.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.156-161
• /
• 2016

An accident of an ammonia tank pipeline at a storage plant resulted in one death and three injuries in 2014. Many accidents including toxic gas releases and explosions occur in the freezing and refrigerating systems using ammonia. Especially, the consequence can be substantial due to that the large amount of ammonia is usually being used in the refrigeration systems. In this study, offsite consequence analysis has been investigated when ammonia leaks outdoors from large storages. Both flammable and toxic effects are under consideration to calculate the affected area using simulation programs for consequence analysis. ERPG-2 concentration (150 ppm) has been selected to calculate the evacuation distance out of various release scenarios for their dispersions in day or night. For offsite residential, the impact area by flammability is much smaller than that by toxicity. The methodology consists of two steps as followings; 1. Calculation for discharge rates of accidental release scenarios. 2. Dispersion simulation using the discharge rate for different conditions. This proactive prediction for accidental releases of ammonia would help emergency teams act as quick as they can.

• Membrane and Water Treatment
• /
• v.13 no.5
• /
• pp.227-233
• /
• 2022

The objective of the study, to develop adsorbent based purifier for removal of radiological and nuclear contaminants from contaminated water. In this regard, 3-aminopropyl silica functionalized with ethylenediamine tetraacetic acid (APS-EDTA) adsorbent prepared and characterized by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD). Prepared APS-EDTA used for adsorptive studies of Cs(I), Co(II), Sr(II), Ni(II) and Cd(II) from contaminated water. The effect on adsorption of various parameters viz. contact time, initial concentration of metal ions and pH were also analyzed. The batch method has been employed using metal ions in solution from 1000-10000 ㎍/L, contact time 5-60 min., pH 4-10 and material quantities 50-200 mg at room temperature. The obtained adsorption data were used for drawing Freundlich and Langmuir isotherms model and both models were found suitable for explaining the metal ions adsorption on APS-EDTA. The adsorption data were followed pseudo second order reaction kinetics. The maximum adsorption capacity obtained 1.3037-1.4974 mg/g for above said metal ions. The results show that APS-EDTA have great potential to remove Cd(II), Co(II), Cs(I), Ni(II) and Sr(II) from aqueous solutions through chemisorption and physio-sorption.

• Journal of Korean Society on Water Environment
• /
• v.26 no.5
• /
• pp.789-795
• /
• 2010

Suspended Solid (SS) is one of the main pollutants and discharges with attached other pollutants such as heavy metal and toxic substance. It is very important to estimate and forecast the release characteristics of SS for water quality improvement. The current studies assumed that SS release rate is proportional to the rain intensity and suggested exponential washoff models. These models related to the shear force of flow. In this study, a new washoff model is suggested based on relation with SS release rate and mean flow rate of the basin surface which is closely related to the shear force. The proposed model is applied to the Goonja drainage district in Seoul, Korea. The new washoff model simulates the SS discharge more accurately in the various rainfall types. The model can be widely applied to the real problems such as the management of non-point source pollutant and the design of treatment facilities.

• Fisheries and Aquatic Sciences
• /
• v.20 no.12
• /
• pp.32.1-32.7
• /
• 2017

Recent in vitro studies have demonstrated that extract of soft coral Dendronephthya gigantea (SCDE) had strong anti-inflammatory activities. However, the direct effects of SCDE on anti-inflammatory activities in vivo model remained to be determined. Therefore, the present study was designed to assess in vivo anti-inflammatory effect of SCDE using lipopolysaccharide (LPS)-stimulated zebrafish model. We also investigated whether SCDE has toxic effects in zebrafish model. The survival, heart beat rate, and developmental abnormalities were no significant change in the zebrafish embryos exposed to at a concentration below $100{\mu}g/ml$ of SCDE. However, lethal toxicity was caused after exposure to 200 and $400{\mu}g/ml$ of SCDE. Treating zebrafish model with LPS treatment significantly increased the reactive oxygen species (ROS) and nitric oxide (NO) generation. However, SCDE inhibited this LPS-stimulated ROS and NO generation in a dose-dependent manner. These results show that SCDE alleviated inflammation by inhibiting the ROS and NO generation induced by LPS treatment. In addition, SCDE has a protective effect against the cell damage induced by LPS exposure in zebrafish embryos. This outcome could explain the profound anti-inflammatory effect of SCDE both in vitro as well as in vivo, suggesting that the SCDE might be a strong anti-inflammatory agent.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.7-17
• /
• 1998

This study is to develop the consequence modeling methodology for quantitative prediction of the hazard distance(or toxic buffer distance) for two-phase flow continuous releases from the pressurized chlorine saturated liquid storage tank of the chemical plant facilities. The source term modeling was peformed by the refined analysis method based on USEPA's guideline and SuperChems model self-calculation, respectively. The hazard distance was predicted for STEL, IDLH and ERPGs(ERPG-2 and ERPG-3) concentrations being used as the toxic regultaion concentration in hazard estimation. To use as hazard estimation guideline for the establishment of the emergency response planning, the effects of source characteristics and meteorological vaiations on the hazard distance was especially considered for ERPG-2 concentration.

• Journal of the Korean Institute of Gas
• /
• v.8 no.1 s.22
• /
• pp.13-17
• /
• 2004

To evaluate suitability of the Gaussian plume model for the small scale release of a dense toxic gas, experimental concentrations of the small scale release of chlorine were compared with theoretical concentrations calculated by the Gaussian plume model using various dispersion coefficients. As a result, Ive found that the dispersion of chlorine gas was fairly varied with dispersion coefficient and atmospheric stability and that chlorine concentrations were well estimated by the Gaussian plume model using Briggs' dispersion coefficient and the effective release hight.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.7
• /
• pp.1298-1307
• /
• 2008

In this study, we investigated the inhibition effects of single and mixed heavy metal ions ($Zn^{2+},\;Ni^{2+},\;Cu^{2+},\;and\;Cd^{2+}$) on iron oxidation by Acidithiobacillus ferrooxidans. Effects of metals on the iron oxidation activity of A. ferrooxidans are categorized into four types of patterns according to its oxidation behavior. The results indicated that the inhibition effects of the metals on the iron oxidation activity were noncompetitive inhibitions. We proposed a reduced inhibition model, along with the reduced inhibition constant ($\alpha_i$), which was derived from the inhibition constant ($K_I$) of individual metals and represented the tolerance of a given inhibitor relative to that of a reference inhibitor. This model was used to evaluate the toxicity effect (inhibition effect) of metals on the iron oxidation activity of A. ferrooxidans. The model revealed that the iron oxidation behavior of the metals, regardless of metal systems (single, binary, ternary, or quaternary), is closely matched to that of any reference inhibitor at the same reduced inhibition concentration, $[I]_{reduced}$, which defines the ratio of the inhibitor concentration to the reduced inhibition constant. The model demonstrated that single metal systems and mixed metal systems with the same reduced inhibitor concentrations have similar toxic effects on microbial activity.