• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.3
• /
• pp.239-249
• /
• 2008

Trawlers have to a sufficient towing force due to it's characteristics of the high performance. The newly constructed trawler with the conventional propellers shows the sufficient towing force, so that the propeller and engine are optimized. In the 1970s, many trawlers were imported from overseas by Korean fisheries industries. But the engine output degradation with year by year caused the trawlers to decrease the towing speed of the vessels. On the previous studies, the nozzle propeller had not so good efficiency with increasing of resistance in high-speed cruising operation over 15knots. But the trawling operation is just required the higher thrust and towing force, so that the nozzle propeller is very profitable for the it's effectiveness. A new nozzle propeller was designed for the 4,462G/T trawler, Dong-San, operated by Dongwon Industries Co., Ltd. to improve the towing speed, and the model tests were performed. The model ship and model propeller are preciously manufactured and used model tests in basin. The resistance test and propeller open water test were performed for the cases of the half and full loads. The required engine horse power and RPM were evaluated analytically by the speed-power curve, when the trawler was equipped with the nozzle propeller. The results of tests showed that the towing speed 4.85knots on the design load waterline requires the 200 engine RPM and 2,567ps in the delivered horsepower.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.294-301
• /
• 1998

Towing performance of a midwater trawl system was examined aboard the training ship KAYA(2900ps) at the East Sea using the midwater trawl gear that had been designed and manufactured in accordance with the vessel. In this experiment, the trawl system data, the towing speed, the length and tension of the warp, net mouth height, and the depth of otter boards and net were measured and analyzed. The results are as follows: 1. In case of heaving in the warp with constant towing speed, the tension was suddenly increased and then again was reduced and after returned to the original steady state tension. At this time, net height was reduced a bit by ascension of ground rope, but returned to it’s original value. In the case where the warp was paid out, the tension was suddenly decreased and after increased and then returned to the tension of the original state, and the net height was greatly increased instantly by the sinking of the ground rope and then returned to the steady state 2. In the case of increased towing speed mm constant warp length, the tension was increased, and reducing the net height, the gear depth was decreased. On the other hand, in the case where towing speed was reduced, the tension was reduced and the gear depth and net height was increased. 3. Otter boards show a swing motion in the scope of 5~ 10m continuously. Otter boards responded to the state change of the trawl system at first, and then the motion of the net appeared. 4. The depth of net center was about 20m deeper than that of the otter boards, it shows about 0.4 times the warp length at the 4knots towing speed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1095-1104
• /
• 2022

The towing cable plays a role in dropping and salvaging the Towed Array Sonar System (TASS) into the water and transmitting the signal (information) detected by the sonar in the water to the probe or surface ship. The towing cable consists of a heavy cable and a lightweight cable in detail. The towing cable for sonar is characterized by high reliability and durability as the underwater environment deteriorates as the operating depth increases. Due to these restrictions, cases designed and manufactured in Korea are extremely rare. The core technology for towing cable design secured through this study is expected to be used in various ways in the defense industry and the private sector.

• 한국기계연구소 소보
• /
• s.10
• /
• pp.49-62
• /
• 1983

A series of model tests on a container ship in waves was executed at the Experimental Towing Tank of Ship Research Station, KIMM. This paper presents the results of resistance, self-propulsion, propeller open-water and ship motion tests in regular head waves. Firstly, the experimental results of ship motion measured on a towed model and a self-propelled model were compared with those of Japanese results showing fairly good agreements. Secondly, the results of resistance and propulsion tests were analyzed and the data of added resistance, thrust increase, torque increase, revolution increase and self-propulsion factors in waves were presented. Also the diffraction force measured on a fixed model in waves was analyzed. Finally, this report shows the propeller characteristics in calm water based on propeller immersion and in regular waves based on wave length.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.298-303
• /
• 2015

When a disabled ship is being towed in a seaway, the resistance increase of the towed ship caused by both the external conditions such as wave and wind and the hull conditions such as drifting angle, should be accurately predicted. Most of the disabled ships cannot be towed in the front direction of hull, but they are usually towed in drifted direction with some drifting angle. In this sense, the resistance increase caused by the drifting angle is not an element to be ignored. In this paper, various methods for prediction of the resistance increase caused by the drifting angle are studied. In addition, new prediction methods such as front-lateral projected ratio method and empirical formula method by multiple regression analysis have been derived. The front-lateral projected area ratio method has been applied to a computer program for prediction of the towing condition, and this method has been approved to be a useful method in practical situations.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.2
• /
• pp.88-95
• /
• 2020

There have been many attempts to predict resistance of vessels in ice floe environment, but they mostly have both strong and weak points at the same time; for instance, simplified formulas are very fast but less flexible to types of ship and ice conditions and other numerical techniques need high computing cost for increased accuracy. A new numerical simulation technique of combining explicit finite element analysis code with a user-subroutine to control real-time forces acting on ice floes was proposed, thereby it was possible to predict ship-to-ice floe resistance with higher convenience and accuracy than other proposed approaches. The basic theory on how real-time hydrostatic and hydrodynamic forces acting on ice floes could be generated using user-subroutine was explained. The heave motion of a single ice floe was simulated using the user-subroutine and the motion amplitudes and periods were almost consistent with analytic values. Towing tests of an icebreaker model ship were simulated using explicit finite element analyses with the user-subroutine. The ice-induced resistance obtained from the towing experiments and simulations showed significant differences. Intentional increase of the drag coefficient to increase the contact duration between the ice floes and rigid model ship leaded the total resistance to be substantially consistent between the model tests and numerical simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.316-322
• /
• 2017

The primary objective of the current study is to develop outstanding hull form on resistance performance by using numerical analysis code. Model tests were conducted to assess the resistance performance of the developed hull form. The investigation of an existing vessel was performed for validating the actual ship design based on the drawing. The operating displacement and speed were mainly confirmed through investigation of the existing vessel. The resistance performance of the existing vessel was analyzed using numerical code. The developed vessel was derived through studies on wave improvement of the bow shoulder, the balance of displacement distribution, the modification of the frame shape, and the size and shape change of the center skeg. Based on the results of a computational fluid dynamics analysis, the resistance performance of the developed vessel showed an improvement of 15% over the existing vessel at a speed of 11 knots. Resistance tests were conducted to evaluate the performance of the existing vessel and the developed vessel in the towing tank. Finally, the effective horsepower of the developed vessel showed an improvement of 17% over the existing vessel.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.118-123
• /
• 1999

The mathematical model used in the simulation of ship's maneuvering contains the hydrodynamic coefficients, which are usually evaluated based on PMM model tests in the towing tank and used to predict ship's maneuvering performance when applied to the proto-type ship. The proper mathematical model has to be developed to predict ship's maneuvering motions with hydrodynamic coefficients very well. The mathematical model for PMM model tests is analyzed with identification program and the hydrodynamic coefficients and maneuvering motions by system identification we compared with those obtained directly from PMM model tests and sea trial. The mathematical model for PMM model tests was established and the magnitudes of ship's maneuvering coefficients were determined. When the identified values of coefficients were used to simulate the maneuvers, a very good agreement was obtained between the numerically simulated motion responses and those obtained from PMM model tests.

• Journal of Navigation and Port Research
• /
• v.43 no.3
• /
• pp.143-152
• /
• 2019

In this paper, the towing stability of the LNG bunker barge was estimated. Currently, LNG bunkering barge is being developed for the bunkering of LNG (Liquefied Natural Gas), an eco-friendly energy source. Since the LNG bunkering barge assumes the form of a towed ship connected to the tow line, the towing stability of the LNG bunker barge is crucial f not only for the safety of the LNG bunker barge but also the neighboring sailing vessels. In the initial stages, a numerical code for towing simulation was developed to estimate the towing stability of the LNG bunkering barge. The MMG (Maneuvering Mathematical modeling Group) model was applied to the equations of motion while the empirical formula was applied to the maneuvering coefficients for use in the initial design stage. To validate the developed numerical code, it was compared with published calculation and model test results. Towing simulations were done based on the changing skeg area and the towing position of the LNG bunkering barge using the developed numerical codes. As a result, the suitability of the designed stern skeg area was confirmed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.591-596
• /
• 2012

Recently, a vessel's maneuvering performance is considered to be an important subject to secure safety at short sea shipping. Especially the high turning performance, which is required to avoid the marine pollution by the ships that was grounded, becomes more severe. In this paper, we discuss the effect of increasing rudder force on turning performance of short sea shipping ship by free running test in towing tank. First of all, we make the 47K PC model ship and high-lift rudder using Coanda effect. And we make the free running test system for the turning test in towing tank. And also we perform the turing test of 47K PC model in several changes of Coanda jet momentum and evaluate the turing performance such as advance and tactical diameter. Finally, we confirm that the increasing of rudder force is very effective to improvement of turning performance of short sea shipping ship.