• MALSORI
• /
• no.52
• /
• pp.161-169
• /
• 2004

This paper describes the automated call routing for train ticket reservation aid system based on speech recognition. We focus on the task of automatically routing telephone calls based on user's fluently spoken response instead of touch tone menus in an interactive voice response system. Vector-based call routing algorithm is investigated and mapping table for key term is suggested. Korail database collected by KT is used for call routing experiment. We evaluate call-classification experiments for transcribed text from Korail database. In case of small training data, an average call routing error reduction rate of 14% is observed when mapping table is used.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.399-404
• /
• 2002

Improvement of measuring accuracy is an essential part of quality control manufacturing process. The OMM is less than the CMM in measure accuracy but the OMM system is more efficient, easier to use than other measurement system. About 40~70% of the machine tool errors are induced by the thermal errors. Therefore, a key requirement for improving the measuring accuracy is to reduce the geometric and thermal errors. Thermal errors are measured by a ball bar system and predicted by the thermal error modeling. Furthermore, using the pre-defined thermal error map approach compensates the geometric accuracy of the OMM. Appropriate experiments are performed using ball-bar system, temperature measuring devices and touch-type probe. Compensated results are compared with those obtained using CMM to verify the proposed methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.71-76
• /
• 2001

In the surface measurement system using touch probe, probe radius compensation is a key factor for accuracy. In this paper we investigate methods for compensating probe radius so that the surface equation for an "unknown surface" can be efficiently derived. The developed algorithm derives the surface equation by the iterative procedure of estimation, verification, and modification . Since the procedure is applied only for the surface region exceeding the tolerance limit, an accurate surface equation can be obtained with less computation and measurement point. The validity and effectiveness of the algorithm was tested by numerical simulations. The results convinced us that the develop algorithm can be used for surface measurement and tool path planning for NC machining.

• Journal of Environmental Impact Assessment
• /
• v.18 no.3
• /
• pp.143-150
• /
• 2009

The present study investigates the effects of the flight paths of military aircraft on noise map and its WECPNL(Weighted Equivalent Continuous Perceived Noise Level) distribution. Aircraft noise modeling and simulation have been performed on a Korean military air base by means of INM(Integrated Noise Model) with the input data of airfield location, aircraft specifications, flight paths and aircraft's operation schedules. The result of noise modelling has been verified in comparison with the result of measured noise level. The flight path of military aircraft, as the key parameter of the present study, was modeled by combining takeoff, overfly, approach and touch-and-go modes. The present INM simulations have been conducted for various flight path cases with different takeoff, approach modes and overfly modes. The simulation results showed that the change of flight path can remarkably affect the noise influence region and the WECPNL distribution around the airfield.

• The Journal of Information Technology and Database
• /
• v.8 no.2
• /
• pp.1-15
• /
• 2001

In trying to bring about online CRM(customer relationship management), companies have paid much attention to eCRM. The key of eCRM is a recommendation system, which is being used by E-commerce sites to find products to purchase. To maintain a constant flow of marketing information and feedback it is important to staying in touch with customers. In this respect, eCRM becomes a serious business tool for sales activities. In this article we present tee case of Kookmin Internet banking eCRM welch is one of the first examples of implementing eCRM in commercial web site in Korea. We examine how Kookmin Internet banking develops eCRM and how it provides customized services to customers. We also explore the role of eCRM in Internet banking and the level of personalization technology used in Kookmin eCRM case.

• Journal of Korea Multimedia Society
• /
• v.7 no.6
• /
• pp.767-780
• /
• 2004

Interaction requires dynamic relationship between objects. In ubiquitous computing environment, interaction between human and the environment is implied. Tactile interaction has so far been less addressed, while tactile sensation should be an important topic in the field of multimedia study. This paper describes development of a novel PVDF (Polyvinylidene Fluoride) dynamic tactile sensor and associated experiments. PVDF dynamic tactile sensors detect touch events applied to the sensor skin by low frequency components of the signal. Rubber skin-covered sensing material was mounted on the bones. Robust performance with low noise was figured out in our robotic experiment. Whereas most conventional sensors are interested in measurement, our dynamic tactile sensor is sensitive to change of state, which could be a key for economic understanding of happenings in the dynamic world. We note that dynamic sensing uses motion as a part of sensing modality We suggest that dynamic sensing be understood in technological terms in the perspective of interactive media and ubiquitous computing.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.3
• /
• pp.10-17
• /
• 2015

Consultant and owner play a very important role in the construction sector which is one of the main sectors in economic development. There are many stakeholders in a construction project including but not limited to: owner, consultant, contractor, subcontractor, and supplier. The consultant is the party who is to stay in close touch with the project owner, which both consultant and owner are considered as the main key stakeholders to make the project happen. It's not a simple task for a consultant to just implement the same style of management and control within various projects that are of a different background and character of owners. Thus, the adjusting plan management and control to the owner environment has been an essential technique to drive the project to success. The objective of this paper is to identify the significant management techniques for adjusting a plan of management and control to the owner environment in Thailand. The methodology is the identification throughout the analogous to abduction from literature review and our empirical observations of Future Engineering Consultants Co, Ltd. We have been in consultation for twenty-five years (25) in Thailand with 209 projects from both public and private owners. As a result, there are (1) Project management styles, (2) Personal style, (3) Owner expectation management, (4) Scope Management, (5) Time Management, (6) Cost Management, (7) Quality Management, and (8) Environmental Management. The input are: a clear defined goal, showing respect by giving good service, maintaining high quality, keeping in touch with owners, and resources. This would give the output of the project's success by meeting the owner's expectation and requirements.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.678-683
• /
• 2006

A novel and intuitive way of accessing applications of mobile devices is presented. The key idea is to use grip-pattern, which is naturally produced when a user tries to use the mobile device, as a clue to determine an application to be launched. To this end, a capacitive touch sensor system is carefully designed and installed underneath the housing of the mobile terminal to capture the image of the user's grip-pattern. The captured data is then recognized by a recognizer with dedicated preprocessing and postprocessing algorithms. The recognition test is performed to validate the feasibility of the proposed user interface system.

• The Journal of the Korea Contents Association
• /
• v.15 no.7
• /
• pp.181-192
• /
• 2015

Nonverbal immediacy plays a key role in interpersonal communication, inducing closeness and another interaction. This case study investigates the nonverbal behaviors in Human-Robot Interaction(HRI) focusing on immediacy, and how they affect perception of a robot. The results show that nonverbal immediacy, such as nodding and leaning forward, affect perceived interactivity. Nonverbal immediacy can be interpreted their meaning clearly when verbal feedback or other communication channel reinforcing them. Also, touch is found to affect come up with similar ones to the robot, because it is associated with concrete and discrete context. People tend to apply social rules to the robot, but they are more open to the unfamiliar robot compared to strangers. The findings in this study provide future HRI studies with heuristic implications by showing a direction and clarifying principles for composition of verbal and nonverbal expression.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.803-807
• /
• 2011

Purpose: The safety of radiation therapy after breast reconstruction using transverse rectus abdominis myocutaneous (TRAM) flap is still being debated, and few studies exist on the outcome of irradiation after immediate TRAM breast reconstruction. Some authors presented satisfactory outcomes after adjuvant radiation therapy on reconstructed breast with pedicled TRAM flap, while others reported significant post radiation changes of the flap. Effect of radiation therapy on TRAM flap was evaluated to see whether adjuvant radiation therapy was tolerable. Methods: 1000 immediate TRAM breast reconstruction was done by a single surgeon from July, 2001 to December, 2009. Among them 105 patients required adjuvant radiation therapy because of advanced disease or locoregional recurrence. Fat necrosis, radiation fibrosis, mastectomy skin flap necrosis, need for secondary touch up procedures, patient satisfaction were evaluated. Results: The incidence of fat necrosis was 10.5% and significant radiation fibrosis occurred in only one patient. Delayed wound problem did not occur during or after irradiation. Secondary touch-up procedures were performed in 12.3%, the most common being fat graft (8.6%). Average patient satisfaction score was 8.62/10, which was not significantly different from the authors' previous report involving all the TRAM patients (8.50). Conclusion: Radiation therapy did not increase the complication rate significantly. Aesthetic result was affected but was tolerated in most cases. The fear of adjuvant radiation is not a negative factor in selecting immediate breast reconstruction with TRAM flap.