• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1271-1278
• /
• 2010

High-speed traction has voltage source variation because the electric power of tractions is supplied by difference traction power system according to operating section. This paper proposes the robust control maintaining constant output performance against voltage source variation for PWM converters of the high speed traction. The proposed scheme consists of feed-forward compensation for current controller by on-line calculating the rms voltage of voltage source. Total dynamic performance of high speed traction can be improved by the reduction of the output voltage ripple which is resulted from voltage source sag and variation. The superior performance and validity of the proposed scheme is proved through the simulation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.129-135
• /
• 2012

Companies strive for quality improvement and use process data obtained through measurement process to monitor and control the process. Measurement data contain variation due to error of operator and instrument. The total variation is sum of product variation and measurement variation. Gage R&R is for repeatability and reproducibility of measurement system. Gage R&R study is usually conducted to analyze the measurement process. In performing the gage R&R study, several parameters such as the appropriate number of operators (o), sample size of parts (p), and replicate (r) are used. In this paper we propose how to determine the optimal combination of number of operators (o), sample size of parts (p), and replicates (r) considering measurement time and cost by statistical method.

• Journal of Advanced Information Technology and Convergence
• /
• v.8 no.2
• /
• pp.59-67
• /
• 2018

The minimum power supply voltage of a typical bandgap current reference (BGCR) is limited by operating temperature and input common mode range (ICMR) of a feedback amplifier. A new BGCR using a bandgap voltage generator (BGVG) is proposed to minimize the effect of temperature, supply voltage, and process variation. The BGVG is designed with proportional to absolute temperature (PTAT) characteristic, and a feedback amplifier is designed with weak-inversion transistors for low voltage operation. It is verified with a $0.18-{\mu}m$ CMOS process with five corners for MOS transistors and three corners for BJTs. The proposed circuit is superior to other reported current references under temperature variation from $-40^{\circ}C$ to $120^{\circ}C$ and power supply variation from 1.2 V to 1.8 V. The total power consumption is $126{\mu}W$ under the conditions that the power supply voltage is 1.2 V, the output current is $10{\mu}A$, and the operating temperature is $20^{\circ}C$.

• Animal Systematics, Evolution and Diversity
• /
• v.39 no.2
• /
• pp.61-66
• /
• 2023

Through a taxonomic study on solitary corals collected from subtidal zones of South and East Seas from 2019 to 2022, Paracyathus rotundatus, an unrecorded species belonging to family Caryophylliidae, is newly added to the anthozoan fauna of Korea. In addition, comparing partial 16S rRNA sequences with a length of 269 bp according to color variation clarified that there were no sequence differences among specimens with color variation, indicating that the color variation is due to intraspecific variation. As a result of this study, a total of 7 genera and 8 species belonging to the Caryophylliidae family have been reported in Korean waters so far.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.903-912
• /
• 2009

This study is focused on simulation-based dimensional tolerance optimization process (DTOP) to minimize vehicle pulls by reduction of dimensional variation in front suspension system. In previous studies, the effect of tires and wheel alignment sensitivity have mainly been investigated to eliminate vehicle pulls in nominal design condition without allocating optimal tolerance level for selected components, among various factors regarding vehicle pulls such as vehicle design parameters, vehicle weight balance, tires, and environmental factors. Unfortunately, there are wide variations in the real vehicle, and these have impacted actual vehicle pulls, especially wheel alignment effects from suspension geometry variation has not been considered in the previous studies. In the tolerance design of suspension, tolerance variables with the uncertainty such as parts dimensional variation, assembly process, datum position and direction, and assembly tool tolerance has a great influence on the variation of the suspension dimensional performances. This study introduces total vehicle pull prediction model in considering major key factors for vehicle pull sensitivity. The Monte Carlo-based tolerance analysis model using Taguchi robust method is developed to optimize dimensional tolerance parameters, satisfying on the target variation level.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.14 no.1
• /
• pp.23-32
• /
• 2007

The nature of genetic variation and diversity among the 65 multivoltine silkworm genotypes was evaluated for 16 post cocoon characters. The components of genetic variation revealed higher PCV (60.487%) and GCV (44.56%) for evenness (variation 1) followed by cohesion (PCV=55.38%, GCV=40.36%) and non-broken filament length (PCV=32.05%, GCV=31.28%). The higher heritability ($h^2$ in broad sense) was observed for boil-off loss (95.6%) followed by non-broken filament length (95.22%). The both genotypic and phenotypic correlation indicated significant positive correlation of filament length with non-broken filament length, silk recovery, raw silk, neatness, and low neatness; and negative correlation with denier, renditta and silk waste. The principal component analysis (PCA) revealed 75.381 % of total variance from the five principal components extracted. On the basis of Mahalonobis' $D^2$ values (Ward's minimum variance), the sixty-five multivoltine silkworm genotypes were classified in to 9 clusters with substantial inter and intra cluster distances. Number of genotypes included in different clusters varied from 3 to 17. The results indicated that the optimum distance obtained in cluster VII (15.059) along with higher cluster mean values especially for filament length, non broken filament length, renditta, silk recovery, silk waste, and raw silk emphasized the utilization of these genotypes in the conventional silkworm breeding programme for improvement of multivoltine silk fibre quality. The possibility of exploiting genetic variation in post cocoon traits for efficient breeding programme is discussed.

• The Korean Journal of Physiology
• /
• v.3 no.1
• /
• pp.29-32
• /
• 1969

Skinfold thickness measurement and total body fat calculation were made in summer (July) and winter (December or January) On 70 medical students (age: 20 yr),8 national team basketball players (age: 20 yr), and 9 middle-age men. Skinfold thickness measurements were made on 4 sites, namely, back, arm, waist and abdomen. The mean skinfold thickness (mm) of the 4 sites was substituted into the following formulae. For adult of 20 years old: % Fat=0.911x+8.1, and for middle-aged men % Fat=1.199x+1.41. In young medical students and ball players body weight decreased, mean skinfold thickness increased in winter season. As a result total body fat .(% body weight) increased in winter In middle-aged men both body weight and mean skinfold thickness increased in winter and resulted in an increase in the total body fat. The detailed data are as follows: 1. In medical students summer: winter values were: body weight, 59.7 :58.9 kg; mean skinfold thickness, 7.85 : 8.12 mm; and total body fat, 15.0 : 15.5% body weight (P<.30). 2. In national team basketball players summer: winter values were: body weight, 73.5 : 69.1 kg; mean skinfold thickness, 7.2 : 7.5 mm; total body fat, 11.6 : 12.1% (P:NS). 3. In middle-aged men summer vs winter values were: body weight, 61.5 : 63.0 kg; mean skinfold thickness, 10.3 : 11.8 mm; total body fat, 17.2 : 18.0% (P:NS). 4. Skinfold thickness on back showed no seasonal variation and on abdomen the thickness increased in winter. 5. It was concluded that the predominant factor in increasing total body fat in winter is the decrease in body exercise in the winter time.

• Journal of Life Science
• /
• v.24 no.6
• /
• pp.612-617
• /
• 2014

The phenetic relationships among six natural populations of Equisetum pratense in Korea were investigated at the population level by constructing a tree based on Random Amplified Polymorphic DNA (RAPD) markers. RAPD analysis was also conducted to estimate genetic diversity and the population structure of E. pratense. A mean of 26.7% at the six population levels indicated polymorphism. E. pratense was found to have fewer alleles per locus (1.267) and fewer effective alleles per locus (1.176). Genetic diversity (0.102) in E. pratense is lower than the average for species with similar life history traits. Total genetic diversity values (HT) varied between 0.112 (OPD-07) and 0.445 (OPD-16), for an average overall polymorphic locus of 0.141. Inter-locus variation in the within-population genetic diversity ($H_S$) was low (0.102). Asexual reproduction, small population size, and the colonization process are proposed as possible factors contributing to the observed low genetic diversity in E. pratense. On a per-locus basis, the proportion of total genetic variation due to differences among populations ($G_{ST}$) ranged from 0.129 for OPD-07 to 0.455 for OPD-09, with a mean of 0.277. This indicated that about 27.7% of the total variation was among populations. Thus, genetic variation (72.3%) resided within populations. This study contributes new information for research on the taxonomy and population genetics of E. pratense.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.115-120
• /
• 2011

20% of total energy use to sustain temperature of building inside. In this reasons, researchers effort to improve the thermal insulation capacity with new wall system. Using appropriate materials and consisting new wall system should considered in energy saving design. OSB(Oriented strand board), Larch lining board used to consist wall system. $2{\sim}6$ Larch lining board has tongue & groove shape for preventing moisture. Comparing with gypsum board and green timber lining board as interior sheathing material, temperature difference of Green timber wall system was bigger than temperature difference of gypsum board wall system. This aspects indicate that Green timber wall system was revealed higher thermal insulation property than gypsum board wall system. Gypsum board portion transfer heat easily because temperature difference gradient of gypsum board wall system was smaller than OSB wall system. Total temperature variation shape of G-4-S and G-6-S show similar model but, temperature variation shape in green timber wall portion assume a new aspect. The purpose of this study was that possibility of thermal insulation variation and new composition of wall system identify to improve thermal insulation performance. In the temperature case, this study shows possibility of improving thermal insulation performance. Humidity, sunshine and wind etc. should considered to determine building adiabatic properties.

• Korean Journal of Ichthyology
• /
• v.4 no.1
• /
• pp.87-95
• /
• 1992

Diurnal variation of fish assemblage in the coastal waters, Shinsudo, Samchonpo was investigated using samples collected by RN 80net. A total of 32 species in 24 families was classfied from samples collected during the period of investigation. Enedrias nebulosus, Acanthogobius flavimanus, callionymus sp. dominated in number of individuals. These three most abundant fish species accounted for approximately 55.3% of the total number of fish collected. The percentage similarity values of number were larger than those of biomass. The catches in January and May 1987 showed a significant difference between day and night compositions. The number of species and individuals peaked just after twilight and low tide.