• 한국운동역학회지
• /
• 제27권1호
• /
• pp.19-23
• /
• 2017

Objective: The aim of this study was to investigate the relationship between the ball velocity and the upper extremity kinematics for both dominant and non-dominant side in inexperienced participants about an overarm throwing task. Method: Seven women who are inexperienced in overarm throwing participated in this study (Age: $25.1{\pm}2.4years$, Height: $160.8{\pm}3.5$; Weight $56.5{\pm}7.8$). Participants visit the laboratory for three days with one day rest between test sessions. Whole body 3-dimensional (3D) motion capture was recorded during the overarm throwing trials with ten cameras Vicon motion analysis system (T-10, T40, Oxford Metrics Ltd, UK). Total 45 overarm throwing were recorded for each side for each test session. Ball speed also was measured 3 meters away behind the subjects and recorded for every trial. Results: Mean ball velocity was higher for dominant hand compared to non-dominant hand (p <.05). Trunk segment variables (maximum angles and angular velocities) showed the most consistent relationship with the ball velocity. Conclusion: The importance of the trunk segment during the throwing activities can be seen in some individuals. But inconsistent results between subjects emphasize the importance of the individuals' movement patterns especially for bilateral sports. The future studies should be conduct about the sequence of segments, kinetic variables and effect of training.

• 한국전문물리치료학회지
• /
• 제16권3호
• /
• pp.24-31
• /
• 2009

This study aimed to investigate the effect of differing heel heights on the electromyographic (EMG) activity in vastus medialis (VM) and vastus lateralis (VL) during stair ascending and descending activities. A total of 26 healthy women volunteered to perform stair-ascending and stair-descending tasks with 3 heel heights: barefoot, 3 cm, and 7 cm. The EMG activities of the VM and VL were recorded during the tasks. During the stair ascending and descending tasks, the EMG activities of both VM and VL significantly changed with differing the heel heights (p<.05). Moreover, the EMG activities of VM and VL during the stair ascending task were significantly higher than the corresponding values during the stair-descending task (p<.05). However, there were no significant differences between the VM:VL EMG ratios for the 3 heel heights (p>.05). The VM:VL EMG ratios between the 2 tasks differed significantly in the 7 cm high heel condition (p<.05). Despite an increase in the EMG activities in both VM and VL during stair ascending and descending tasks, there was no change in the relative EMG intensities of VM and VL, which was measured by calculating the VM:VL ratio this result indicates that no VM:VL imbalances were elicited. The relative EMG intensities of VM and VL during stair descent were lower than the corresponding values during the ascent, suggesting that VM and VL may show an imbalance in the eccentric activation during the weight-acceptance phase. This study provides useful information that will facilitate future research on how heel height affects muscle activity around the knee joint.

• 한국분말재료학회지
• /
• 제27권5호
• /
• pp.365-372
• /
• 2020

Predicting the quality of materials after they are subjected to plasma sintering is a challenging task because of the non-linear relationships between the process variables and mechanical properties. Furthermore, the variables governing the sintering process affect the microstructure and the mechanical properties of the final product. Therefore, an artificial neural network modeling was carried out to correlate the parameters of the spark plasma sintering process with the densification and hardness values of Ti-6Al-4V alloys dispersed with nano-sized TiN particles. The relative density (%), effective density (g/㎤), and hardness (HV) were estimated as functions of sintering temperature (℃), time (min), and composition (change in % TiN). A total of 20 datasets were collected from the open literature to develop the model. The high-level accuracy in model predictions (>80%) discloses the complex relationships among the sintering process variables, product quality, and mechanical performance. Further, the effect of sintering temperature, time, and TiN percentage on the density and hardness values were quantitatively estimated with the help of the developed model.

• 대한의용생체공학회:의공학회지
• /
• 제34권1호
• /
• pp.1-7
• /
• 2013

According to the frequent use of mobile devices, risk of repetitive strain injury for the finger joints was increasing recently. The purpose of this study was to investigate the difference of muscular endurance limit of the thumb between adults and children. A total of thirty subjects (15 adults: $41.0{\pm}7.9$ years and 15 children: $9.5{\pm}2.7$ years) was recruited for this experiment. Maximum voluntary contraction (MVC) of the thumb was measured for 100 trials for each subject by using a push-pull gauge. From the maximum peak value obtained, three main factors (MVC, endurance limit, and fatigue index) were defined to quantify fatigue characteristics of the thumb flexor muscle. The experimental results showed that the mean of MVC, endurance limit, and fatigue index of the children were approximately 50% compared to the adults (p < 0.001). From the results of Pearson correlation test, the endurance limit was highly correlated with weight, age, hand length rather than height. Based on this study, children are more vulnerable to repetitive task using the thumb such as text/SNS messaging, gaming, and scrolling.

• 대한임베디드공학회논문지
• /
• 제15권4호
• /
• pp.197-204
• /
• 2020

The ImageNet dataset is a large scale dataset and contains various natural scene images. In this paper, we propose a convolutional neural network (CNN)-based weighted ensemble technique for the ImageNet classification task. First, in order to fuse several models, our technique uses weights for each model, unlike the existing average-based ensemble technique. Then we propose an algorithm that automatically finds the coefficients used in later ensemble process. Our algorithm sequentially selects the model with the best performance of the validation set, and then obtains a weight that improves performance when combined with existing selected models. We applied the proposed algorithm to a total of 13 heterogeneous models, and as a result, 5 models were selected. These selected models were combined with weights, and we achieved 3.297% Top-5 error rate on the ImageNet test dataset.

• 한국인터넷방송통신학회논문지
• /
• 제21권3호
• /
• pp.115-121
• /
• 2021

인간의 착지 전략은 다양한 조건에서 하지역학을 통해 설명해 왔다. 그러나 중량과 착지 높이의 두 조건이 결합되었을 때 하지역학이 어떻게 반응하는지 아직 이해할 수 없다. 이 연구의 목적을 달성하기 위해 성인 남녀 총 20명은 다양한 착지 높이 0.3 m, 0.4 m, 0.5 m에서 중량(무중량, 체중의 10%, 20% 그리고 30%)을 적용해 드롭랜딩을 실시하였다. 연구결과 중량의 주효과는 모든 변인에서 통계적으로 유의하지 않았다. 반면 착지 높이의 증가에 따라 무릎관절 각도는 더 굴곡된 형태를 보였으며 통계적으로 유의하였다. 또한 착지 높이 증가에 따라 좌우, 전후, 수직지면반력, 부하율은 더 증가되는 반면, 안정화시간은 보다 짧은 시간에 생성되었으며, 통계적으로 유의하였다. 따라서 인간은 다양한 높이에서 중량을 변경시키더라도 착지 동작을 성공적으로 수행할 수 있다. 그러나 중량 조건보다 착지 높이의 변화에 더 민감하게 반응하였다. 착지 높이는 시각정보를 통해 인지 및 충격 흡수에 대비할 수 있지만, 중량 수준은 신체가 인지하기 어렵고 충격흡수를 위한 착지 전략 메커니즘에 더 적용시키기 어려운 이유를 설명해준다.

• 대한물리의학회지
• /
• 제19권1호
• /
• pp.95-105
• /
• 2024

PURPOSE: This study aimed to utilize the International Classification of Functioning, Disability, and Health (ICF) tool to identify a problem list and explore intervention effects using proprioceptive neuromuscular facilitation (PNF) for improving the crosswalk performance of patients who have undergone a bilateral hip arthroplasty. METHODS: The subject of this study was a 43-year-old male who had undergone a bilateral hip arthroplasty. To address the subject's functional status, a clinical decision-making process was carried out in the order of examination, evaluation, diagnosis, prognosis, intervention, and outcome. Patient information during the examination was collected using the ICF core set. The evaluation involved listing the items of each problem using the ICF assessment sheet and identifying the interaction between activity limitations and the impairment level. The diagnosis explicitly described the causal relationships derived from the evaluation using ICF terminology. The prognosis presented activity goals, body function, and structured goals in terms of the activity and participation levels that needed to be achieved for an individual's functional status. The intervention approached problems through the four components of the PNF philosophy, namely basic principles and procedures, techniques, and patterns, in an indirect-direct-task sequence. Results were compared before and after the intervention using the ICF evaluation display. RESULTS: The results of the study showed that the primary activity limitation, which was the walking time across the crosswalk, showed improvement, and the trunk's counter rotation and the weight-bearing capacity of both the lower limbs, which were impairment level indicators, were enhanced. CONCLUSION: This study suggests that PNF intervention strategies will serve as a positive approach for improving crosswalk walking in patients with bilateral hip arthroplasty.

• 대한인간공학회지
• /
• 제31권3호
• /
• pp.445-453
• /
• 2012

The aim of this paper was to prove that if the risk level in combined tasks was improved through evaluation of postural load of liquid weight measurement process, the workload level and ratio of exposure time would be changed, and the time of process would be seen concurrently. Background: According to results of epidemiological studies conducted by Korea Occupational Safety & Health Agency, 122 musculoskeletal disorders occurred during 1992 to 2008, in which manufacturing industry covers 96(78.7%) of total. However, this is an insufficient level and only occupies 39% based on the South Korea's manufacturing standard industrial classification(246 industries). Method: Firstly, the number of batches weighed on one day(460min) was investigated based on the work performed and Weight measured weekly. VCR recording was taken based on the level of liquid ingredients prescribed for 1batch using the Camcorder. After dividing a 356 sec video into 1 sec using the screen capture function in Gom player, the job classification was performed by analyzing the change of working postures, which revealed 148 working postures. Time measurement was decided by time of the postures was being maintained. Then, the REBA analysis was performed for the working postures. The ratio of Exposure time was calculated based on the measurement time and REBA Score. In addition, the recommendations were designed and implementation was carried out for the working postures with REBA Score higher than 3. Finally, after the intervention, REBA measurement, time measurement, and ratio of exposure time were calculated for the comparison of works before and after improvement. Results: The number of work elements was decreased by 30.4% from 148 to 103 after improvement. The results of time measurement showed that the time was reduced by 46.3% from 356 sec to 191 sec. And the ratio of exposure time was also improved by 52.1% from 0% to 52.1% after improvement. Conclusion: The reduction of time was found to improve the productivity of management. Furthermore, because the reduction of ratio of exposure time and the improvement of workload level are the improvement of discomfort, it would contribute to the improvement of the worker's psychological working posture. Application: These results would contribute to musculoskeletal disease prevention and management performance. Further studies for other industries would be needed based on this case study.

• 대한한의학회지
• /
• 제20권4호
• /
• pp.39-49
• /
• 2000

This study was conducted to prove that there exists a relation between the spleen and learning and memory as Oriental medicine believesTo promote the function of the Spleen, Guibitang was administered to rats in this study. Rats were 250～300g Sprague-Dawley, and were divided into three groups. One was the normal group without any pretreatment. Another was the control group which was administered normal saline and the abdominal injection of L-NAME before learning and memory test. And the 3rd was the sample group, to which was administered Guibitang extract and (no 'the') abdominal injection of L-NAME before the learning and memory test. Each group was made up of 12 rats. Morris water maze and radial arm maze tasks were performed in the learning test and Morris water maze task in the memory test. For 2 days to evaluate the ability of learning in the Morris water maze, 16 trials were carried out and first latency(lapse time to find the escape platform for the first time) was measured. The next day, to evaluate the ability of memory, the escape platform was eliminated from the maze, and total path, target entry number, first latency and memory score were measured. 48hrs before the radial arm maze task was performed, bait was deprived from each group. After learning test, bait was permitted to each group. So 85% of the body weight was maintained for 6 days of the test. Each of the eight arms was baited; correct choice numer and error were counted; each trial was finished when the rat had entered each of the eight arms, or more than 10 minutes had elapsed. The results were as follows: In the learning test, the first latency of the sample group in the Morris water maze showed evident improvement of learning compared to control group at the 11th, 12th, 13th trial of 16 trials, and correct choice number in radial arm maze showed noticeable improvement compared to the control group at 3rd, 4th and 5th; In the memory test, the memory score of the sample group showed evident improvement compared to the control group. From the above results, the administration of Guibitang, which tonifies the function of the Spleen, could enhance the ability of learning and memory. So it was suggested that the Spleen has a relation with learning and memory.

• 대한물리치료과학회지
• /
• 제31권1호
• /
• pp.16-32
• /
• 2024

Background: Exercise equipments and assistive devices for the disabled are being developed, but improvements for usability are still needed. The purpose of this study was to improve and utilize the developed exercise equipment and assistance devices by conducting usability test for people with spinal cord injury. Design: Cross-sectional Study. Methods: Scenarios and usability indicators were derived by conducting a preliminary usability test, 5 non-disabled men and women aged 19 or older. In the scenario, a total of 9 tasks were sequentially performed, including 2 tasks of entry and exit, 5 tasks of assistance devices and weight stack adjustment, and 2 tasks of pre exercise and exercise. The usability indicators were task success (success or fail), execution time (sec), safety, and convenience. For safety, 7 questions (Likert scale, 1~5 point) related to safety, stability and hazard were derived, and for convenience, the system usability scale (SUS score) was used (range: 0~100, 50 percentile rank is 68 point). Results: As a result of the usability test of people with spinal cord injury, there was a large variation among subjects in the task of adjusting the position of the pulley and support in the execution time (11.64~25.44 seconds), and one person failed to adjust the pulley. The safety level showed a lower score (score = 3 points) than other items in the item of entrapment or skin pressure, and in the case of SUS, the average score was 64.5 points, which was close to the acceptable level. Conclusion: Through the usability test, it was confirmed that exercise equipment for the disabled needs improvement in operability, pinching, and pressure, and that it is necessary to develop an assistive device that provides unrestrained posture information (biofeedback) to maintain correct posture during exercise.