• 인터넷정보학회논문지
• /
• 제22권3호
• /
• pp.53-58
• /
• 2021

보안관제 분야의 실제 업무활동에 대해서는 거의 연구가 없는 실정이다. 이에 본 논문에서는 보안관제의 위협정보 탐지 대응시간 모델링을 통해 적정 투입인력 규모 산정에 기여하고 최신 보안솔루션 투입시의 효과성 분석 등에 활용할 수 있는 실질적인 연구 방법론을 제시하고자 한다. 보안관제센터에서 수행하는 전체 위협정보 탐지대응시간은 TIDRT(Total Intelligence Detection & Response Time)로 정의한다. 전체 위협정보 탐지 대응시간(TIDRT)는 내부 위협정보 탐지대응시간(IIDRT, Internal Intelligence Detection & Response Time)과 외부 위협정보(EIDRT, External Intelligence Detection & Response Time)의 합으로 구성된다. 내부위협정보 탐지대응시간(IIDRT)는 다섯 단계의 소요시간의 합으로 계산할 수 있다. 본 연구의 궁극적인 목표는 보안관제센터의 주요한 업무활동들을 수식으로 모델링하여 보안관제센터의 사이버 위협정보 탐지대응시간 계산식을 산정하는데 있다. 2장에서는 선행연구를 살펴보고, 3장에서는 전체 위협정보 탐지대응시간의 계산식을 모델링한다. 4장에서 결론으로 끝을 맺는다.

• Earthquakes and Structures
• /
• 제18권2호
• /
• pp.263-273
• /
• 2020

The use of energy concepts in seismic analysis and design of structures requires the understanding of the input energy response of multi-degree-of-freedom (MDOF) systems subjected to strong ground motions. For design purposes and non-time consuming analysis, however, it would be beneficial to associate the input energy response of MDOF systems with those of single-degree-of-freedom (SDOF) systems. In this paper, the theoretical formulation of energy input to MDOF systems is developed on the basis that only a particular portion of the total mass distributed among floor levels is effective in the nth-mode response. The input energy response histories of several reinforced concrete frames subjected to a set of eleven horizontal acceleration histories selected from actual recorded events and scaled in time domain are obtained. The contribution of the fundamental mode to the total input energy response of MDOF frames is demonstrated both graphically and numerically. The input energy of the fundamental mode is found to be a good indicator of the total energy input to two-dimensional regular MDOF structures. The numerical results computed by the proposed formulation are verified with relative input energy time histories directly computed from linear time history analysis. Finally, the elastic input energies are compared with those computed from time history analysis of nonlinear MDOF systems.

• 대한간호학회지
• /
• 제42권1호
• /
• pp.48-55
• /
• 2012

Purpose: The aim of this study was to compare statistical methods to control response bias in nursing activity surveys. Methods: Data were collected at a medical unit of a general hospital. The number of nursing activities and consumed activity time were measured using self-report questionnaires. Descriptive statistics were used to identify general characteristics of the units. Average, Z-standardization, gamma regression, finite mixture model, and stochastic frontier model were adopted to estimate true activity time controlling for response bias. Results: The nursing activity time data were highly skewed and had non-normal distributions. Among the 4 different methods, only gamma regression and stochastic frontier model controlled response bias effectively and the estimated total nursing activity time did not exceeded total work time. However, in gamma regression, estimated total nursing activity time was too small to use in real clinical settings. Thus stochastic frontier model was the most appropriate method to control response bias when compared with the other methods. Conclusion: According to these results, we recommend the use of a stochastic frontier model to estimate true nursing activity time when using self-report surveys.

• 한국약용작물학회지
• /
• 제24권4호
• /
• pp.263-270
• /
• 2016

Background: In this study, microwave extraction was used, which is an effective method to extract useful bioactive substances as it requires low quantities of solvent and short time periods. The aim of this study was to determine the optimal extraction conditions for Agrimonia pilosa Ledeb. Methods and Results: The independent variables were ethanol concentration, microwave power, and extraction time, each of which had five levels. The dependent variables were total polyphenol and total flavonoid content, and DPPH radical scavenging activity. To determine the optimal extraction conditions for bioactive compounds, a response surface methodology was employed. Contour maps were generated from polynomial equations. The optimal conditions were then assumed by superimposing these contour maps. Based on the resulting graph, the optimal microwave extraction conditions for Agrimonia pilosa Ledeb were determined as 42 - 48% ethanol concentration, 240 - 280W microwave power, and 13 - 20 min of extraction time. Conclusions: Ethanol concentration had a significant effect on microwave extraction, in terms of total polyphenol and total flavonoid content, as well as DPPH radical scavenging activity. Microwave power and extraction time influenced the total polyphenol content, but not the total flavonoid content or the DPPH radical scavenging activity.

• 한국정보과학회논문지:시스템및이론
• /
• 제36권1호
• /
• pp.9-20
• /
• 2009

마감시간이 있는 주기 태스크와 마감시간이 없는 비주기 태스크가 공존하는 결성 실시간 시스템에서는 주기 태스크의 마감시간과 비주기 태스크의 빠른 응답시간을 보장하는 것이 중요하다. 본 논문에서는 비주기 태스크 처리에 효율적이면서 잘 알려져 있는 알고리즘인 Total Bandwidth Server(TBS) 보다 향상된 알고리즘인 Enhanced TBS(ETBS)를 제시한다. ETBS는 Earliest Deadline First(EDF) 스케줄링 알고리즘을 사용하는 단일처리기 시스템에서 주기 작업의 단위 수행시간마다 확보할 수 있는 잉여 여유시간을 이용해 온라인으로 비주기 태스크에 마감시간을 부여하는 알고리즘이다. 제시한 알고리즘은 주기 및 비주기 태스크들이 처리기의 이용률을 모두 이용할 수 있게 하며 주어진 주기 태스크들의 마감시간을 보장한다. ETBS 알고리즘은 TBS와 같은 계산 복잡도 O(1)을 가지면서도 TBS보다 좋은 응답시간을 가짐을 이론적으로 보였고, 정량적인 응답시간 차이는 모의실험을 통해 보였다.

• 정보처리학회논문지D
• /
• 제16D권3호
• /
• pp.295-306
• /
• 2009

질의실행시간최소화는 분산 데이타베이스 설계에 있어 가장 중요한 목적중의 하나이다. 총시간최소화는 온라인거래처리시스템의 목적인 반면, 반응시간최소화는 의사결정지원 질의시스템의 목적이다. 본 논문에서는 질의실행시간최소화를 달성하기 위해 질의를 세분화하여 최적의 데이터베이스 사이트에 할당하는 분석모델을 개발하였으며, 문제해결방법으로 유전자알고리즘을 채택하였다. 총시간최소화 관점에서의 질의실행 계획은 반응시간최소화 관점의 질의실행계획에는 적합하지 않다는 것을 증명하였으며, 그 반대의 경우도 증명하였다. 최대 20개의 조인이 포함되는 질의를 설계하여 시뮬레이션 실험을 통해 테스트를 수행하였고, 유전자알고리즘과 완전한 전수조사와의 결과를 비교함으로써 모든 경우에 유전자알고리즘을 채택한 해결책이 최적의 결과를 도출하였음을 증명하였다.

• 한국식품저장유통학회지
• /
• 제8권2호
• /
• pp.157-163
• /
• 2001

Optimal conditions for hot water extraction of Liriope spicata tuber were investigated with changes in solvent ratio(2∼6 fold) and heating time(1∼5 hr) by response surface methodology. The content of extractable solids increased with an increased in solvent ratio, and the highest content showed at heating time of 3 hr. The content of total steroid saponin increased with a decrease in solvent ratio, and increased with an increase in heating time at increasing the solvent ratio. The content of non-reducing sugar containing oligosaccharides at a lower solvent ratio didn’t show changes depending on heating time, while that at a higher ration decreased with an increase in heating time. Optimal extraction conditions using hot water as the limited conditions of 15∼18% extractable solids, 1.5∼2.0% total steroid saponin, 6∼8% reducing sugar, 6∼7% non-reducing sugar and 13∼15 brix were 3 hrs of heating time and 4 fold of solvent ratio.

• Structural Engineering and Mechanics
• /
• 제69권3호
• /
• pp.293-306
• /
• 2019

In current seismic design codes, various elastic design acceleration spectra are defined considering different seismological and soil characteristics and are widely used tool for calculation of seismic loads acting on structures. Response spectrum analyses directly use the elastic design acceleration spectra whereas time history analyses use acceleration records of earthquakes whose acceleration spectra fit the design spectra of seismic codes. Due to the fact that obtaining coherent structural response quantities with the seismic design code considerations is a desired circumstance in dynamic analyses, the response spectra of earthquake records used in time history analyses had better fit to the design acceleration spectra of seismic codes. This paper evaluates structural response distributions of multi-story reinforced concrete frames obtained from nonlinear time history analyses which are performed by using the scaled earthquake records compatible with various elastic design spectra. Time domain scaling procedure is used while processing the response spectrum of real accelerograms to fit the design acceleration spectra. The elastic acceleration design spectra of Turkish Seismic Design Code 2007, Uniform Building Code 1997 and Eurocode 8 are considered as target spectra in the scaling procedure. Soil classes in different seismic codes are appropriately matched up with each other according to $V_{S30}$ values. The maximum roof displacements and the total base shears of considered frame structures are determined from nonlinear time history analyses using the scaled earthquake records and the results are presented by graphs and tables. Coherent structural response quantities reflecting the influence of elastic design spectra of various seismic codes are obtained.

• Management Science and Financial Engineering
• /
• 제4권2호
• /
• pp.59-75
• /
• 1998

This paper presents an incentive system to reduce response time from a supplier. The incentive system is expressed as a contract between an assembler and a supplier who have a long-term relationship. We produce the optimal payment scheme and expected total cost, when the assembler is farsighted. We show that the farsighted assembler obtains higher effort level from the supplier than the myopic assembler. We also show that the expected total cost of the farsighted assembler is smaller in the long run, although it is initially higher than that of the myopic assembler.

• 산업식품공학
• /
• 제21권3호
• /
• pp.256-266
• /
• 2017

This study was designed to optimize ethanol extraction process of unfertilized corn silk (UCS) to maximize phytochemical contents and bioactivities. The response surface methodology (RSM) with central composite design (CCD) was employed to obtain the optimal extraction conditions. The influence of ethanol concentration, extraction temperature and extraction time on total polyphenol contents, total flavonoid contents, maysin contents, 2,2-diphenyl-1-picrylhydrazyl(DPPH) radical scavenging activities and tyrosinase inhibition were analyzed. For all dependable variables, the most significant factor was ethanol concentration followed by extraction temperature and extraction time. The following optimum conditions were determined by simultaneous optimization of several responses with the Derringer's desirability function using the numerical optimization function of the Design-Expert program: ethanol concentration 80.45%, extraction temperature $53.49^{\circ}C$, and extraction time 4.95 h. Under these conditions, the predicted values of total polyphenol contents, total flavonoid contents, maysin contents, DPPH radical scavenging activity and tyrosinase inhibition were $2758.74{\mu}g\;GAE/g$ dried sample, $1520.81{\mu}g\;QUE/g$ dried sample, 810.26 mg/100g dried sample, 56.86% and 43.49%, respectively, and the overall desirability (D) was 0.74.